• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.203-215
• /
• 1995

A continued operation of RCPs during a certain small break LOCA may increase unnecessary inventory loss from the RCS causing a severe core uncovery which might lead to a fuel failure. After TMI-2 accident, the CEOG developed RCP trip strategy called “Trip-Two/Leave-Two” (T2/L2) in response to NRC requests and incorporated it in the generic EPG for CE plants. The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis determines the RCP trip setpoint and demonstrates the safe operational aspects of RCP trip strategy during a small break LOCA for YGN 3&4. The trip setpoint of the first too RCPs for YGN 3&4 is calculated to be 1775 psia in pressurizer pressure based on the limiting small break LOCA with 0.15 ft$^2$ break size in the hot leg. The analysis results show that YGN 3&4 can maintain the core coolability even if the operator fails to trip the second too RCPs or trips at worst time. Also, the YGN 3&4 RCP trip strategy demonstrates that both the 10 CFR 50.46 requirements on PCT and the ANSI standards 58.8 requirements on operator action time can be satisfied with enough margin. Therefore, it is concluded that the T2/L2 RCP trip strategy with a trip setpoint of 1775 psia for YGN 3&4 can provide improved operator guidance for the RCP operation during accidents.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.486-493
• /
• 2010

This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

• Journal of Powder Materials
• /
• v.28 no.4
• /
• pp.293-300
• /
• 2021

We investigate the effect of phosphorous content on the microstructure and magnetic properties of Fe_83.2Si_5.33-0.33xB_10.67-0.67xP_xCu_0.8 (x = 1-4 at.%) nanocrystalline soft magnetic alloys. The simultaneous addition of Cu and P to nanocrystalline alloys reportedly decreases the nanocrystalline size significantly, to 10-20 nm. In the P-containing nanocrystalline alloy, P atoms are distributed in an amorphous residual matrix, which suppresses grain growth, increases permeability, and decreases coercivity. In this study, nanocrystalline ribbons with a composition of Fe_83.2Si_5.33-0.33xB_10.67-0.67xP_xCu_0.8 (x = 1-4 at.%) are fabricated by rapid quenching melt-spinning and thermal annealing. It is demonstrated that the addition of a small amount of P to the alloy improves the glass-forming ability and increases the resistance to undesirable Fe_x(B,P) crystallization. Among the alloys investigated in this work, an Fe_83.2Si₅B₁₀P₁Cu_0.8 nanocrystalline ribbon annealed at 460℃ exhibits excellent soft-magnetic properties including low coercivity, low core loss, and high saturation magnetization. The uniform nanocrystallization of the Fe_83.2Si₅B₁₀P₁Cu_0.8 alloy is confirmed by high-resolution transmission electron microscopy analysis.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.534-542
• /
• 2012

This study was conducted to investigate the effect of 1-methylcyclopropene (1-MCP) on fruit quality and incidence of physiological disorders for keeping freshness during marketing period in Asian pear (Pyrus pyrifolia Nakai) 'Wonhwang' and 'Whasan'. Fruits were treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP for 12 hours at $25^{\circ}C$, at two or three stages of ripeness as determined by days after full bloom (DAFB). Fruits were harvested at 130 and 140 DAFB in early season cultivar 'Wonhwang' and 135, 145, and 150 DAFB in mid-season cultivar 'Whasan', respectively. Fruits were stored at $25^{\circ}C$ for 21 days and measured the flesh firmness, weight loss, soluble solids, acidity, ethylene, respiration and severity of physiological disorders at week interval. 1-MCP treatment to 'Wonhwang' pears harvested at 130 and 140 DAFB effectively delayed firmness loss during storage at $25^{\circ}C$. Untreated fruits of 'Wonhwang' pears harvested at 130 DAFB showed 32.3 and 10.1N of firmness after 14 and 21 days of shelf-life at $25^{\circ}C$, respectively, while those of the 1-MCP treated fruits showed 39.4 and 33.1N during same period. In the fruits harvested at 140 DAFB, the firmness of untreated fruit was lowered to 14.8 and 6.6N after 14 and 21 days, respectively, but those of 1-MCP treated fruit were 35.0 and 33.3N, respectively. Whereas, 1-MCP treatment delayed firmness loss only in the fruit harvested late (150 DAFB) in 'Whasan' pears. Higher soluble solids content and acidity during extended shelf-life were apparent in 1-MCP treated 'Wonhwang' pears, while those of 'Whasan' pears were little changed. 'Wonhwang' pears showed a relatively high ethylene production (maximum $0.58{\mu}l{\cdot}L^{-1}$) in the fruits harvested late than early harvested one. 'Whasan' pears showed little amount of ethylene production regardless of extended shelf-life. 1-MCP treatment to 'Wonhwang' pears decreased respiration rate following shelf-life, 42 and 50% reduction were observed at 14 days of shelf-life when compared with those of untreated ones harvested at 130 and 140 DAFB, respectively. No reduction of respiration rate by the treatment of 1-MCP was detected in 'Whasan' pears which showed considerably low respiration rate compared with 'Wonhwang' pears. Harvest time influenced the level of physiological disorders together with extension of shelf-life in both the cultivars. 1-MCP treatment completely blocked the incidence of internal browning of 'Wonhwang' pears harvested at 130 DAFB, and reduced the incidences of pithiness and core browning, while it promoted the flesh spot decay disorder regardless of harvest time. 1-MCP treatment was of little benefit for the prevention of physiological disorders in 'Whasan' pears compared with those of 'Wonhwang'.

• KDI Journal of Economic Policy
• /
• v.14 no.3
• /
• pp.3-21
• /
• 1992

By localizing the production of core parts and intermediate goods previously imported from Japan, Korean firms have been striving to increase their market share and profit in the final goods market in which Japanese firms are dominating. Korean producers' efforts, however, have often been thwarted by Japanese suppliers' "strategic" behavior. This competitive strategy involves Japanese exporters supplying parts and intermediate goods at very high prices until Korean firms must locally develop them, and then setting the prices far below the previous level so that the profitability of localization is dramatically reduced, or even means a loss for the Korean manufacturer. This paper intends to explain the strategic behavior of Japanese firms through the concepts of strategic interactions and joint economies. Strategic interactions can be aggressive or accommodating depending on whether competitors are dealing with strategic substitutes or complements. Joint economies exist in multi-stage competition when competition in the previous state favorably influences "profits" of the ensuing stage. Competiton between Korean and Japanese firms (a two-stage game involving production and technology rivalries) can be characterized by joint economies and strategic substitutes: joint economies since technological improvement results in more profits in the production stage; and strategic substitutes since an increase in marginal profits of one firm brings about a decrease in marginal profits of the other in a duopolitic production stage. This implies that the flood of "low price" Japense substitutes is an almost "natural" phenomenon in the context of the duopolistic market described in this paper. In the technology competition stage, on the other hand, technology development and technology transfer can be either strategic complements or substitutes. This implies that, in typical comparative static analyses, the effect of changes in exogenous variables cannot be expected a priori. Thus it becomes very difficult to determine the desirability of applying various policy measures such as countervailing duties, R&D subsidies, and creating demand for localized products. For these reasons, it is indeed likely that the measures suggested as means of circumventing the strategic behavior of Japanese firms (and enhancing technological development of Korean firms) may not work.

• Korean Journal of Biological Psychiatry
• /
• v.20 no.2
• /
• pp.45-53
• /
• 2013

Objectives Non-major depression with fewer symptoms than required for a Diagnostic and Statistical Manual of Mental Disorders-4th edition diagnosis of major depressive disorder (MDD) has consistently been found to be associated with functional impairment. In this study, we aim to estimate the cognitive impairment and the quality of life in elderly patients with subsyndromal depression (SSD) compared with non-depressive elderly (NDE). Methods The Korean version of Mini International Neuropsychiatric Interview was administered to 194 outpatients with depression and 108 normal controls. SSD is defined as having five or more current depressive symptoms with core depressive symptoms (depressive mood or loss of interest or pleasure) during more than half a day and more than seven days over two weeks. Depression was evaluated by the Korean form of Geriatric Depression Scale of a 15-item short version. Global cognition was assessed by Mini-Mental State Examination in the Korean version of CERAD assessment packet (MMSE-KC). Subjective cognitive impairment was assessed by the Subjective Memory Complaint Questionnaire. Quality of life was evaluated by the Korean Version of Short-Form 36-Item Health Survey. Results The mean score of the MMSE-KC in the SSD group was lower than that in the NDE group with adjustment for age, gender, and education [F = 4.270, p = 0.04, analysis of covariance (ANCOVA)]. If we defined those having Z-score of MMSE-KC < -1.5 as a high risk group of cognitive impairment, the odds ratio for the high risk group of cognitive impairment was 1.86 [95% confidence intervals (CI) 1.04-3.34] in SSD and 7.57 (95% CI 3.50-16.40) in MDD compared to NDE. The scores of physical component summary (F = 9.274, p = 0.003, ANCOVA) and mental component summary (F = 53.166, p < 0.001, ANCOVA) in the SSD group were lower than those in the NDE group with adjustment for age, gender, and education. Conclusions The subjects with SSD, as well as those with MDD, showed impairment of global cognition and also experienced low quality of life in both physical and mental aspects, compared to the NDE group.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.145-151
• /
• 2007

In this work, small-size, high-performance solenoid-type RF chip inductors utilizing a low-loss ${Al_2}{O_3}$ core material were investigated. The size of the chip inductors fabricated in this work were $0.86{\times}0.46{\times}0.45m^3$, $1.5{\times}1.0{\times}0.7m^3$, $2.1{\times}1.5{\times}1.0m^3$, and $2.4{\times}2.0{\times}1.4m^3$ and copper (Cu) wire with $27{\sim}40{\mu}m$ diameter was used as the coils. High frequency characteristics of the inductance, quality factor, and impedance of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). It was observed that the developed inductors with the number of turns of 7 have the inductance of 13 to 100nH and exhibit the self-resonant frequency (SRF) of 6.4 to 1.1GHz. The SRF of inductors decreases with increasing the inductance and the inductors have the quality factor of 50 to 80 in the frequency range of 300MHz to 1.3GHz. In this study, small-size solenoid-type RF chip inductors with high inductance and high quality factor were fabricated successfully.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.60-68
• /
• 2010

In case of sensorineural hearing loss, auditory perception can be activated by electrical stimulation of the nervous system via electrode implanted into the cochlea or auditory nerve. Since the tonotopic map of the human auditory nerve has not been definitively identified, the recording of auditory nerve signal with microelectrode is desirable for determining the tonotopic map. This paper proposes the multi-channel analog front-end for auditory nerve signal detection. A channel of the proposed analog front-end consists of an AC coupling circuit, a low-power 4th-order Gm-C LPF, and a single-slope ADC. The AC coupling circuit transfers only AC signal while it blocks DC signal level. Considering the bandwidth of the auditory signal, the Gm-C LPF is designed with OTAs adopting floating-gate technique. For the channel-parallel ADC structure, the single-slope ADC is used because it occupies the small silicon area. Experimental results shows that the AC coupling circuit and LPF have the bandwidth of 100 Hz - 6.95 kHz and the ADC has the effective resolution of 7.7 bits. The power consumption per a channel is $12\;{\mu}W$, the power supply is 3.0 V, and the core area is $2.6\;mm\;{\times}\;3.7\;mm$. The proposed analog front-end was fabricated in a 1-poly 4-metal $0.35-{\mu}m$ CMOS process.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.59-65
• /
• 2014

Purpose - The competitiveness of logistics in the 21st century rests on ensuring the efficiency and effectiveness of its local hub. While considering entry into a niche market in local logistics, it is pertinent to note that Budapest is emerging as a hub in EU enlargement in Eastern Europe. Big, small, and medium-sized businesses in Korea entered Hungary in the early 1990s since then, there has been a significant increase in Korean presence, of approximately 130 times. This study aimed to identify the key distribution issues that have emerged in relation to Eastern Europe. Research design, data, and methodology - This study indicates that 33 major Korean companies were located in Hungary, which serves as an out post to enter the European marketplace. However, Korea's exports to Hungary have declined (-32.0% in 2012) because of a loss of competitiveness against multinational corporations, due to factors such as the rise in current local distribution costs and wages. Hungary, on the other hand, through diversification and expansion of foreign trade with the non-EU markets, including Korea, is increasing its exports. Strategies of emerging countries are compared and reviewed in this study, by examining the vicissitudes of Hungary's distribution methods. Results - There are issues regarding Hungary's innovative ability. Hungary has a history of low wages and high skilled labor. However, the outflow of high-quality human resources for high-wages has become more extensive, and this underlines concerns that the CEE's trade hub is moving to neighboring countries. After the European financial crisis in 2010, the Hungarian economy is now developing, because of the IMF's measures, and it is being transformed into a trade surplus nation, while regaining distribution volumes rapidly. However, if there is continued lack of investment, the supply chain is weakened and exports decline amidst competition with TNCs or with China's distribution networks. Conclusions - It is necessary to create a new logistics approach for increasing trade between Korea and Hungary. First, Korean small and medium enterprises (SMEs) should build trust by working with advanced Hungarian talent, and they should expand into state-of-the-art fields instead of being confined to traditional sectors. Second, this study focuses on limiting and lowering their high expectations for success according to foreign direct investment (FDI) inflows and the role in the CEE distribution hub Korea should try to strengthen the distribution hub with its centralized population, using better, more highly educated human resources, thereby sustaining more innovative ability. Further, the positive effects of these measures are manifested in enhanced business on both sides of Hungary, namely, the EU and non-EU nations such as Turkey and emerging markets around Europe, and a better engagement in the core placement of culture and industry. For this, Korea can contribute to, and benefit from, a Hungarian logistics center, for adopting the high-tech cluster systems and commercializing distribution technology such as RFID·USN.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.359-370
• /
• 2012

The endodontically treated tooth is generally restored with post and core, owing to the brittle and the loss of large amount of tooth structure. The purpose of this study was to evaluate the clinical status of fixed prostheses to improve the quality of dental care. In order to assess the clinical status of fixed prostheses, a total of 101 individuals (aged 30-89, 66 women and 35 men loaded with 125 fixed prostheses) who treated in the Department of Prosthodontics, Pusan National University Dental Hospital, between January 1990 to December 2005 were examined. The results of this study were as follows: 1. Length of service of fixed prostheses was $9.7{\pm}3.4$ years (mean), 11.1 years (median). 2. Age and sex of patient was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 3. Location of fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was low in anterio-posterior combination region (median:9.2 years). 4. Longevity of fixed prostheses made of base metal ceramic(median:12.0 years) and noble metal ceramic (median:11.3 years) is long (P<.05). 5. Number of units in fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 6. Condition of opposing dentition was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 7. Dental caries, periapical disease, tooth fracture were frequent complications. In 51.9% of the cases, abutment state after removing fixed prostheses was needed to be extracted.