• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1995.06b
• /
• pp.55-75
• /
• 1995

Induction of HMG-Co A reductase (HMGR) is essential for the biosynthesis of sesquiterpenoid phytoalexins and steroid derivatives in Solanaceous plants following wounding and pathogen infection. To better understand this complex step in stress-responsive isoprenoid synthesis, three classes of cDNAs for HMGR (hmg1, hmg2, and hmg3) were isolated from a potato tuber library. The potato cDNAs had extensive homology in open reading frames but had low homology in the 3'-untranslated regions. RNA gel blot analysis using gene-specific probes revealed that hmg1 is induced by wounding but wound induction is strongly suppressed by arachidonic acid or by inoculation with Phytophthora infestants. In contrast, hmg2 and hmg3 are slightly induced by wounding and strongly enhanced by arachidonic acid or inoculation. The induction and suppression of HMGR genes parallel the suppression of steroid and stimulation of sesquiterpenoid accumulations observed in earlier investigations. Treatment of the tuber disks with a low concentration of methyl-jasmonate doubled the wound induced accumulation of hmg1 transcripts and steroid-glycoalkaloid accumulation, but did not affect the abundance of transcripts for hmg2 or hmg3 nor induce phytoalexins. High concentration of methyl-jasmonate suppressed hmg1 mRNA and steroid-glycoalkaloid accumulation, induced hmg3 mRNA, and did not elicit phytoalexins. Lipoxygenase inhibitors suppressed the accumulation of of hmg1 transcripts and steroid-glycoalkaloids, which were restored by exogeneous methyl-jasmonate. Methyl-jasmonate applied together with arachidonic acid enhanced the elicitor induced accumulation of sesquiterpenes and sustained steroid-glycoalkaloid levels with transcript levels for the various HMGR mRNAs equal to or greater than wound-only treatment. These results domonstrate that the consequences of wound- and pathogen-responses of plants are different at the levels of gene expression and associated secondary metabolism.

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.145-149
• /
• 2014

Arsenic (As) is one of the heavy metals which causes acute bio-toxicity even at low concentration and has disastrous effect on environment. In some countries, As contamination has become alarming and increasing day by day as consequences of unsustainable management practices. Many existing physical, chemical and biological processes for As removal from water system are not feasible due to techno-economic limitations. The present study highlights the scope of biological strategy for As removal through phytoextraction. Arsenic uptake and accumulation in the biomass of three plant species and their As tolerance abilities have been investigated to develop an efficient phytoextraction system in combination of these plant species. Three non-crop plant species, Pteris vittata; Mimosa pudica, and Eichhornia crassipus were treated with 0-200 mg/L As in liquid nutrient solution for 14 days. P. vittata accumulated total 9,082.2 mg (8,223 mg in fronds) As/kg biomass and Eichhornia total 6,969 mg (4,517 mg in fronds)/kg biomass at 200 mg/L As concentration, respectively. Bioaccumulation factor (BF) and translocation factor (TF) were estimated to differentiate between excluders, accumulators and accumulation in above ground biomass. Pteris and Eichhornia have highest BF (67 and 17) and TF (64 and 3), respectively. In contrast, Mimosa accumulated up to 174 mg As/kg plant biomass which is low in comparison with other two plants, and both BF and TF were ${\leq}1$. This study reveals that Pteris and Eichhornia are As hyperaccumulator, and potential candidates for As removal from water system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.365-373
• /
• 2007

We optimized the compositions of electrolyte and additives for anode in Ni-MH battery to improve the electrode characteristics at ambient and low temperatures using response surface method(RSM). Among various additives for anode, PTFE exhibited the greatest influence on the discharge capacity of the anode. Through response optimization process, we found the optimum composition of the additives to exhibit the greatest discharge capacity. When the amount of additives was too small, the anode was degraded with time due to the low binding strength among alloy powders and the resultant separation of powders from the current collector. In contrast, the addition of large amount of the additives increased in the resistance of the electrode. In addition, the discharge capacity of the anode at $-18^{\circ}C$ increased with decreasing the concentration of KOH, NaOH and LiOH in design range of electrolyte. The resistance and viscosity of electrolyte appear to affect the discharge capacity of the anode at low temperature.

• Childhood Kidney Diseases
• /
• v.28 no.1
• /
• pp.27-34
• /
• 2024

Purpose: The ability to concentrate urine becomes an important index in determining nocturnal enuresis (NE) treatment. The aim of our study was to investigate first-morning urine osmolality (Uosm) changes at the end of treatment compared to before treatment in children with NE. Methods: A total of 71 children with NE were divided into two groups according to the level of first-morning Uosm before treatment: high group (≥800 mOsm/kg) and low group (<800 mOsm/kg). Baseline parameters were obtained from uroflowmetry, frequency volume charts for at least 2 days, and a questionnaire for lower urinary tract symptoms. All patients were basically treated with standard urotherapy and medication. The first-morning Uosm was measured twice, before treatment and at the end of treatment. Results: The response rate was higher in the low group after 3 months of treatment than in the high group (P=0.041). However, there was no difference between the two groups at the end of the treatment. In the high group, the first-morning Uosm at the end of treatment did not show a significant change compared to before treatment. In contrast, the first-morning Uosm increased in the low group at the end of treatment (P<0.001). However, it was still lower than that of the high group (P=0.007). Conclusions: The ability to concentrate nocturnal urine improved at the end of treatment compared to before treatment in the low Uosm NE children. In addition, NE improved faster in the low Uosm group before treatment than in the high group.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.669-675
• /
• 2002

Introduction of sliced raw fish meat(SRFM) to fast food business has been considered seriously. However bacteria causing food poisoning should be controlled. Organic acids such as vinegar and lactic acid used in the sauce for SRFM were evaluated for their antibacterial activities. At low concentration levels of vinegar and lactic acid exerted strong antibacterial activities toward Vibriu sp.. In contrast, in case of Salmonella typhimurium and Escherichia coli O157:H7 low anitbacterial activities were observed even at relatively high concentrations. Minimum inhibitory concentrations(MIC) of vinegar for V. vulnificus, V. cholerae non-O1, V. parahaemolyticus, V. mimicus, S. typhimurium and E. coli O157:H7 were 16, 18, 16, 12, 26, and $20{\mu}\ell /m\ell, respertively. MIC of lactic acid for V. vilnificus, V. cholerae non-O1, V. parahaemolyticus, V. mimicus, S. typhimurium and E. coli O157:H7 were 20, 25, 25, 25, 40, and $35{\mu}\ell /m\ell, respectively. In case of vinegar bactericidal concentration upon 10 second contact for V. vulnificus, V. cholerae non-O1, V. parahaenolyticus, V. mimicus and E. coli O157:H7 were 8, 14, 10, 4, and 48%, respectively; however, even at 50% colony of S. typhimurium was observed. In case of lactic acid any colony was observed for V. vulnificus, V. cholerae non-O1, V. parahaemolyticus, V. mimicus, S. typhimurium and E. coli O157:H7 at the concentration of 2, 3, 4, 3, 14, and 17%, respectively. Vinegar and lactic acid of low concentration inhibited the growth of Vibrio sp., food poisoning pathogen in SRFM; in contrast, at high concentration these organic acids inhibited Salmonella sp. and Escherichia sp., food poisoning pathogen in other than SRFM.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.991-998
• /
• 2008

This study is to determine the effects of PCM concentration on the temperature changes of the air layers of a garment when the environmental temperature changes. The selected PCM was Nonadecane and coated on cotton fabrics with PCM concentrations 10%, 20%, and 30%. The temperature changes of the air layers between fabrics were measured by Human-Clothing-Environment Simulator which measure a dynamic heat transfer. After stabilizing at $34^{\circ}C$ for 1 hour, the multi layered garment system were exposed to $5^{\circ}C$ or $10^{\circ}C$ for 30 minutes and then, exposed to $34^{\circ}C$ for 30minutes. The results like following could be obtained. When the environmental temperature changed high to low, temperature of the air layer increased by heating effect of PCM. In the contrast, when the environmental temperature changed low to high, the temperature increase of the air layer was delayed because of cooling effect by PCM. Also, the more concentration of PCM, the bigger the heating effect. Cooling effect showed more clearly at PCM concentration 20%. The temperature differences of the air layers between with PCM fabrics and with non-PCM fabrics were bigger at $10^{\circ}C$ than at $5^{\circ}C$. Consequently, though PCM has influenced on the temperature of the air layer by heating and cooling effect, those effects haven't shown in all layers equally. It was shown that the effect of PCM varied according to the layer in the case of multi layered garment system and heat gain as well as heat loss in the outermost layer had to be taken into account.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.587-598
• /
• 2023

To assess the distribution and temporal changes in radon concentration within a region in Yeonpung-myeon, Goesan-gun, known for elevated groundwater radon levels, we conducted a series of analyses, measuring radon concentration and DTW (Depth to water table) at 2-month intervals over 12 cycles. The investigation covered 10 groundwater wells and one stream within the designated area. The groundwater in the central part of the region exhibited high radon concentrations, ranging from 37.0 to 2,675.2 Bq/L. Conversely, the peripheral zones displayed comparatively lower radon concentrations, ranging from 10.6 to 37.9 Bq/L. This variation is attributed to the presence of granite porphyry that intruded into the Okcheon Formation, forming a fracture zone and contributing to elevated radon levels in the central part. In contrast, the peripheral locations, located within the Okcheon Formation and away from the granite porphyry intrusion, demonstrated lower radon concentrations. The observed significant fluctuation in radon concentration in the central area is associated with its low-lying topography. The pronounced seasonal changes in groundwater levels contribute to the migration of shallow, low-radon groundwater into areas with higher radon concentrations, explaining the observed variations in radon levels within the central part of the studied area.

• Membrane Journal
• /
• v.19 no.1
• /
• pp.63-71
• /
• 2009

In this study, polysulfone which has excellent mechanical and thermal stability with low cost was used for preparing a non-conducting polymer matrix as a reinforced composite membrane for fuel cell application. The membranes were prepared by phase separation method. Polymer concentration and retention time were controlled to investigate the effects on the membrane morphology. The resaltant membranes showed all sponge-like structure independent of polymer concentration. The mechanical and thermal stability were improved with increasing polymer concentration in contrast to the membrane porosity. As a result, the membranes prepared with the retention time for 2 mins using 20 wt% of polymer solution was suitable for a fuel cell compositite membrane providing optimum properties such as approximately 80% of high porosity, 1.3 MPa of tensile strength, and less than 1% of thermal shrinkage both machine and transverse direction.

• Ocean and Polar Research
• /
• v.33 no.4
• /
• pp.457-472
• /
• 2011

To elucidate the trophic role of heterotrophic nano- and microplankton (HNMP), we investigated their biomass, community structure, and herbivory in three different water masses, namely, south of Polar Front (SPF), Polar Front Zone (PFZ), the Sub-Antarcitc Front (SAF) in the Drake Passage in the Southern Ocean, during the austral summer in 2002. We observed a spatial difference in the relative importance of the dominant HNMP community in these water masses. Ciliates accounted for 34.7% of the total biomass on an average in the SPF where the concentration of chlorophyll-a was low with the dominance of pico- and nanophytoplankton. Moreover, the importance of ciliates declined from the SPF to the SAF. In contrast, heterotrophic dinoflagellates (HDFs) were the most dominant grazers in the PFZ where the concentration of chlorophyll-a was high with the dominance of net phytoplankton. HNMP biomass ranged from 321.9 to 751.4 $mgCm^{-2}$ and was highest in the PFZ and lowest in the SPF. This result implies that the spatial dynamic of HNMP biomass and community was significantly influenced by the composition and concentration of phytoplankton as a food source. On an average, 75.6%, 94.5%, and 78.9% of the phytoplankton production were consumed by HNMP in the SPF, PFZ, and SAF, respectively. The proportion of phytoplankton grazed by HNMP was largely determined by the composition and biomass of HNMP, as well as the composition of phytoplankton. However, the herbivory of HNMP was one of the most important loss processes affecting the biomass and composition of phytoplankton particularly in the PFZ. Our results suggest that the bulk of the photosynthetically fixed carbon was likely reprocessed by HNMP rather than contributing to the vertical flux in Drake Passage during the austral summer in 2002.

• The Korean Journal of Zoology
• /
• v.11 no.3
• /
• pp.85-91
• /
• 1968

Artificial and natural radioactivity in airborne, rain-out and fallout dusts in Seoul district in the period of 1963-1967 were studied by measuring gross-activity and by analyzing nuclides by means of $\\gamma$-spectrometry. Short-lived radium and thorium decay products give rise to most of the airborne activity unless the fission product concentration is extremely high and it is likely to be said activity remaining after a few days is attributable to fission products. Of seven Chinese nuclear explosions performed at Lop Nor, Sinkiang Province, two exhibited the activity of extremely high concentration of fission product and reached Seoul district around 30 hours after the explosion. The activity was followed by a sudden decrease in less than a week, in contrast to the long-lasted activity of low concentration originating from the huge tests performed by the United States and the USSR in 1956-1962. The radioactive environmental contamination in Seoul district, due to the Chiness nuclear test explosions, largely depends on the height above the earth at which the nuclear explosion is performed and the type of nuclear device as well as the weather system at the time and immediately after the explosion, especially the jet stream in middle latitude in the upper troposphere.