• 제목/요약/키워드: Low confining pressure

검색결과 52건 처리시간 0.019초

깊이에 따른 소금의 고결화 강성특성 (Stiffness Characteristics of Salt Cementation according to Depth)

  • 엄용훈;변용훈;쭝꽝훙;이종섭
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.472-481
    • /
    • 2009
  • Cementation phenomenon has a huge influence on geotechnical stiffness and strength under low confining pressure. The goal of this study is to evaluate the characteristics of stiffness according to the depth. The piezo disk elements are installed at each layer of the cell for the detection of the compressional waves. The change of compressional wave velocity is classified by three stages. The compressional wave velocities are shown different according to the depth. The compressional wave velocity is especially influenced by cementation, effective stress, and coordinate number. Furthermore, the electrical conductivity and cone tip resistance are measured according to the depth. The electrical conductivity and the cone tip resistance show the similar trend with the compressional wave velocity. This study shows that the cementation by salt is affected by the depth on the granular materials.

  • PDF

FE modeling of Partially Steel-Jacketed (PSJ) RC columns using CDP model

  • Ferrotto, Marco F.;Cavaleri, Liborio;Trapani, Fabio Di
    • Computers and Concrete
    • /
    • 제22권2호
    • /
    • pp.143-152
    • /
    • 2018
  • This paper deepens the finite element modeling (FEM) method to reproduce the compressive behavior of partially steel-jacketed (PSJ) RC columns by means of the Concrete Damaged Plasticity (CDP) Model available in ABAQUS software. Although the efficiency of the CDP model is widely proven for reinforced concrete columns at low confining pressure, when the confinement level becomes high the standard plasticity parameters may not be suitable to obtain reliable results. This paper deals with these limitations and presents an analytically based strategy to fix the parameters of the Concrete Damaged Plasticity (CDP) model. Focusing on a realistic prediction of load-bearing capacity of PSJ RC columns subjected to monotonic compressive loads, a new strain hardening/softening function is developed for confined concrete coupled with the evaluation of the dilation angle including effects of confinement. Moreover, a simplified efficient modeling approach is proposed to take into account also the response of the steel angle in compression. The prediction accuracy from the current model is compared with that of existing experimental data obtained from a wide range of mechanical confinement ratio.

강-콘크리트 계면의 계면상수 결정 : 부착 및 비부착 슬립실험 (Determination of Steel-Concrete Interface Parameters : Bonded and Unbonded Slip Tests)

  • 이타;주영태;이용학
    • 콘크리트학회논문집
    • /
    • 제21권6호
    • /
    • pp.773-780
    • /
    • 2009
  • 강-콘크리트 계면거동의 성질을 정의하는 계면변수를 파악하고, 구성모델의 성격을 정의하는 구성변수의 물리적 특성 파악과 값의 크기를 결정하기 위해 강-콘크리트 계면에 대한 거동실험을 수행하였다. 구성변수는 포괄적인 적용을 목적으로 부착계면 뿐만 아니라 비부착계면의 거동까지 포함하기 위해 최근에 Mohr-Coulomb 파괴규준에 근거하여 제안된 구성모델을 기준하여 결정하였으며, 구속압을 받는 계면의 취성으로부터 연성까지의 파괴거동 성질을 고려하기 위해 낮은 구속압 및 중간크기의 구속압을 포함하는 네 종류의 구속압을 고려하였다. 실험 결과에 대한 분석을 통해 최대평균전단응력과 잔류응력 및 모드 II 파괴에너지 방출률과 구속압 간의 관계는 각 경우가 선형적 관계에 있음을 확인하였다. 이 논문에서 얻어진 실험 결과에 근거하여 이어지는 후속 논문에서는 해석적 방법에 의한 계면상수 값의 결정과 결정된 계면상수 값을 이용한 계면유한요소해석을 수행하여 계면상수 값의 적절성을 검증하였다.

Sabkha층의 Hydrotest 시 입자파쇄 거동분석 (Behavior Analysis of Particle Crushing about Sabkha Layer under Hydrotest)

  • 김석주;한희수
    • 한국지반환경공학회 논문집
    • /
    • 제14권9호
    • /
    • pp.57-65
    • /
    • 2013
  • 탄산질 모래는 낮은 구속압에서도 입자파쇄가 발생하며 이로 인해 높은 압축성을 나타내기 때문에 입자파쇄가 강도 및 변형특성에 중요한 영향을 미친다. 본 논문은 탄산질 모래로 구성된 Sabkha층에 Tank 설치를 위하여 시험성토 및 Hydrotest를 수행한 후 지반의 침하거동을 비교 분석한 것이다. 현장 Sabkha층 시료는 압밀시험결과 80~170kPa에서 입자파쇄가 발생하였고, 화학조성을 분석한 결과 석영질 모래에서 검출되지 않은 칼슘성분이 다량 검출되어 입자파쇄가 잘 일어날 수 있음을 알 수 있었다. 입자파쇄가 발생하지 않은 시험성토에서는 성토완료 이틀만에 간극수의 소산과 침하가 완료되었으나 입자파쇄응력보다 큰 200kPa의 하중이 재하된 Hydrotest에서는 충수 후 장기침하거동이 발생하여 시험성토의 침하거동과는 상이한 결과를 나타내었다. 따라서 현장 Sabkha층에 입자파쇄하중 이상의 하중이 재하될 경우 입자파쇄로 인한 즉시침하와 파쇄된 입자의 재배열로 인한 이차압축침하가 발생됨을 알 수 있었다.

Water-induced changes in mechanical parameters of soil-rock mixture and their effect on talus slope stability

  • Xing, Haofeng;Liu, Liangliang;Luo, Yong
    • Geomechanics and Engineering
    • /
    • 제18권4호
    • /
    • pp.353-362
    • /
    • 2019
  • Soil-rock mixture (S-RM) is an inhomogeneous geomaterial that is widely encountered in nature. The mechanical and physical properties of S-RM are important factors contributing towards different deformation characteristics and unstable modes of the talus slope. In this paper, the equivalent substitution method was employed for the preparation of S-RM test samples, and large-scale triaxial laboratory tests were conducted to investigate their mechanical parameters by varying the water content and confining pressure. Additionally, a simplified geological model based on the finite element method was established to compare the stability of talus slopes with different strength parameters and in different excavation and support processes. The results showed that the S-RM samples exhibit slight strain softening and strain hardening under low and high water content, respectively. The water content of S-RM also had an effect on decreasing strength parameters, with the decrease in magnitude of the cohesive force and internal friction angle being mainly influenced by the low and high water content, respectively. The stability of talus slope decreased with a decrease in the cohesion force and internal friction angle, thereby creating a new shallow slip surface. Since the excavation of toe of the slope for road construction can easily cause a landslide, anti-slide piles can be used to effectively improve the slope stability, especially for shallow excavations. But the efficacy of anti-slide piles gradually decreases with increasing water content. This paper can act as a reference for the selection of strength parameters of S-RM and provide an analysis of the instability of the talus slope.

스트레인 게이지를 이용한 부직포의 변형거동 계측 (Measurement of Nonwoven Geotextile Deformation with Strain Gauges)

  • 원명수;이용안;고형우;김유성;박병수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.96-102
    • /
    • 2006
  • Because of the increasing need to use clayey soil as the backfill in reinforced soil structures and embankment material, nonwoven geotextiles with the drain capability have been receiving much attention. However, there are few studies of the deformation behavior of nonwoven geotextiles at geosynthetics reinforced soil structures in the field because the nonwoven geotextile, which has low tensile stiffness and higher deformability than geogrids and woven geotextiles, is difficult to measure its deformation by strain gauges and to prevent the water from infiltrating. This study proposes a new, more convenient method to measure the deformation behaviour of nonwoven geotextile by using a strain gauge; and examines the availability of the method by conducting laboratory tests and by applying it on two geosynthetics reinforced soil (GRS) walls in the field. A wide-width tensile test conducted under confining pressure of 7kPa showed that the local deformation of nonwoven geotextile measured with strain gauges has a similar pattern to the total deformation measured with LVDT. In the field GRS walls, nonwoven geotextile showed a larger deformation range than the woven geotextile and geogrid; however, the deformation patterns of these three reinforcement materials were similar. The function of strain gauges attached to nonwoven geotextile in the walls works normally for 16 months. Therefore, the method proposed in this study for measuring nonwoven geotextile deformation by using a strain gauge proved useful.

  • PDF

대형직접전단시험을 통한 말뚝과 지반 경계면의 전단특성 분석 (Analysis of Shear Resistance Characteristics in Pile-Soil Interface using Large-Scale Direct Shear Test)

  • 유승경;홍기권
    • 한국지반신소재학회논문집
    • /
    • 제21권3호
    • /
    • pp.61-69
    • /
    • 2022
  • 본 연구에서는 지반조건을 고려한 말둑의 인발저항 성능의 합리적인 평가방법 확립의 일환으로써, 지반의 세립분 함유율 및 구속압 조건에 따른 말뚝과 지반 경계면의 전단특성을 평가하기 위한 대형직접전단시험을 수행하였다. 그 결과, 수직하중이 증가하고 모형지반의 세립분 함유율이 작을수록 전단변형에 따른 전단응력이 크게 발생됨을 알 수 있었다. 그리고 동일한 수직하중과 세립분 함유율 조건에서 말뚝 모형체의 표면이 거칠수록 최대전단응력은 다소 크게 나타났다. 강도정수로써 내부 마찰각과 점착력을 산정하여 분석한 결과, 모형지반의 세립분 함유율이 증가할수록 모형체 경계면에서의 내부마찰각은 감소하였으나 점착력은 증가하는 것을 알 수 있었다. 또한, 말뚝 모형체 표면이 거칠수록 모형지반의 세립분 함유율에 관계 없이 내부마찰각과 점착력은 크게 나타났다.

등방제하과정과 반복전단과정에서의 멤브레인 관입량 및 보정식에 대한 실험적 고찰 (Correction for Membrane Penetration Effect during Isotropic Unloading and Undrained Cyclic Shear Process)

  • 권영철;배우석;오세욱
    • 대한토목학회논문집
    • /
    • 제26권3C호
    • /
    • pp.201-207
    • /
    • 2006
  • 유효응력의 산정을 위해 간극수압의 측정이 필수인 지반공학 분야의 실험에서는 멤브레인을 사용하여 구속압과 간극수압의 계측을 실시하지만 구속압의 변화 등에 의해 멤브레인이 공시체 쪽으로 관입하는 현상이 발생하여 체적변형률과 유효응력의 계측치에는 오차가 포함되게 된다. 본 연구에서는 중공비틀림 전단시험장치를 사용하여 등방제하과정과 반복전단과정 및 액상화 후의 재압밀 과정에 있어서의 멤브레인 관입량 및 관입 보정식에 대한 고찰을 실시하였다. 실험 결과, 반복전단에 의해 모래의 유효응력이 20kPa 이하의 낮은 유효응력 조건에서는 보정식에 의한 멤브레인 보정량이 과대평가 되고 있음을 알 수 있으며, 이러한 보정식의 한계는 유효응력이 0에 가까워질 수록 보정량이 급격히 증가하는 것이 원인이다. 본 연구에서는 이러한 점을 감안하여 보정량의 급증을 방지하기 위한 상수의 도입에 대해서도 검토하였다. 이와 더불어 초기 상대밀도가 높거나 액상화 후의 입자 재배열 등의 밀도 변화가 일어나는 경우에도 보정식의 적용에 대한 신중한 검토가 필요하다는 점도 확인하였다.

비압밀비배수조건에서 다져진 낙동강 실트질 모래의 전단거동에 대한 실험적 연구 (Experimental Studies of Shearing Properties on Compacted Nakdong River Silty Sands under Unconsolidated Undrained Condition)

  • 킨스웨틴;김영수
    • 한국지반환경공학회 논문집
    • /
    • 제11권12호
    • /
    • pp.57-62
    • /
    • 2010
  • 본연구에서는 실트함유량에 따른 다양한 실트질모래의 전단특성에 관한 효과를 평가했다. 두 종류의 삼축 압축시험은 다져진 낙동강 모래속에 실트 함유율 10%와 30%를 혼합한 조건에서 원형공시체를 성형하고 비압밀 비배수 상태로 실험을 수행하였다. 모든 동일한 공시체는 같은 초기함수비로 5층으로 나누어 준비하여 포화시킨 다음 초기 유효 구속압을 100~400kPa까지 증가시킨 후 전단한다. 모든 공시체는 파괴 후 변형이 감소하는 경향을 보이며 응력변형률 곡선과 축차응력은 실트함유율이 10%일때가 30%일 때 보다 크게 나타났다. 간극수압은 실트함유율 10%인 공시체가 파괴 후의 간극비 증가로 인해 부의 영향이 나타났지만 반면에 실트함유율 30%인 공시체는 양의 경향을 나타났다. 실트함유량이 낮은 다져진 공시체의 거동은 실트함유량이 높은 경우 보다 더 심한 다이러턴시 경향을 나타났고 최대축차응력은 실트함유량이 증가함에 따라 감소하였고 최대간극수압은 증가하였다.

준설토 파종식물의 생육경향 및 관리방안 연구 -낙동강 14공구 중심으로- (A Study of Characteristics of Seeding Plants through Improvements of Dredge Vegetation-Base -Focus on Site 14 in Nakdong-gang-)

  • 김남춘;안필균;남상준
    • 한국환경복원기술학회지
    • /
    • 제15권1호
    • /
    • pp.141-154
    • /
    • 2012
  • This study was launched to verify the effective composition of plant species and its management program most suited for the dredged soiled area near Nakdong River Site 14. The improvement methods of planting base and the composition of plants such as silver grass, reed, and some colonies in aesthetic effect were studied. To search the management methods to decrease the confining pressure risen from the burried seeds which would consequently harm the previously seeded plants, experimental construction process was measured on the site. The purpose of this experiment was to figure out which part of the improvement on the plant base has the most significant effect for the revegetation of infertile, dredged soil, to verify the easily seeded, developing plants among seeded plants, and finally, to find the restoration model using plants near the dredged soil around riverside. 8 seeded plants and 23 invaded species were appeared which among the emerged plants, development of Aster yomena MAKINO, Lotus corniculatus var. japonica Regel, Trifolium repens L, and Dianthus longicalyx Miq were proved to be brought up well. Difference risen from the seed composition were not noticeable until 150day since the germination was proceeded mainly by Aster yomena MAKINO. The experimental plot with dredging sand+organic fertilizer method of construction and dredging sand+soil conditioner method showed most development while the effect of the plot with only the soil base of dredging sand stayed low. Another important method for the management of infertile, dredged soil base would be the removal of disturbing species which the experiment showed the tied relationship between the removal of disturbing species and development of seeding plants. Although this study was carried out focused on the Nakdong River Project, the study suggests the general management program that the removal of disturbing species such as Humulus japonicus Sieboid & Zucc. and Pueraria lobata (Willd.) Ohwi in times around rainy season(60days after seedling) would be effective for the easy growth of revegetation plants.