• 제목/요약/키워드: Low confining pressure

검색결과 52건 처리시간 0.021초

Silt질 모래의 고변형률 진동특성(기본성질) (Dynamic Properties of Silty Sands at High Amplitude (Basic Properties))

  • 송정락;김수일
    • 한국지반공학회지:지반
    • /
    • 제4권3호
    • /
    • pp.27-34
    • /
    • 1988
  • 고변형률을 받는 모래는 비선형 거동을 나타내게 된다. 본 연구에서는 석영질 모래의 공극비와 미세입자 (석영분말)함량을 변화시키면서 모래의 고변형률 진통특성을 공진주 실험을 이용하여 조사 하였다. 그 결과 석영분말을 취음에 따라 전단탄성계수와 감쇠비는 석영분말의 함량을 증가시킬수록 전단변형률에 대한 변화가 점점 더 완만하였고 공극비의 변화에 대해서는 그 변화가 두드러지지 못 하였다. 또한 Rainberg-Osgood방적식을 써서 흙의 진동특성과 전단변형률파의 관계를 고찰하였는 바 전 단탄성계수와 감쇠비 모두의 경우 R은 2.0정도이나 C는 시료상태 및 구속압력에 따라 200에서 3200까지의 큰 변화를 나타내었다.

  • PDF

토목섬유로 보강된 슬래그 재료의 전단강도 및 변형 특성 (Strength and Deformation Characteristics of Geosynthetics-Reinforced Slag Materials)

  • 신동훈;이종석
    • 한국지반신소재학회논문집
    • /
    • 제8권4호
    • /
    • pp.27-34
    • /
    • 2009
  • 본 연구에서는 토목섬유가 층상으로 보강된 슬래그 재료의 전단강도와 변형특성을 다루었다. PET mat와 같은 토목섬유에 의한 보강이 슬래그의 전단강도와 변형특성에 미치는 영향을 조사 및 분석하기 위해 압밀배수 조건 하에서의 대형삼축압축시험을 수행하였다. 연구에 사용된 슬래그 재료는 현장에서 사용되는 재료와 동일한 재료로서 scale effect로 인한 문제점은 없었다. 토목섬유로 보강된 슬래그의 응력-변형율 거동은 무보강시 보다 다일러턴시의 양이 작고, 축변형율 증가시 항복 이후에도 축차응력이 증가하는 변형율경화(strain hardening) 거동을 나타내었다. 토목섬유로 보강된 슬래그 재료의 겉보기 점착력과 내부마찰각 등의 강도정수는 보강되지 않은 경우의 값보다 1.2-1.4배 정도 크고, 구속압 수준이 클수록 커지는 것으로 나타났다. 따라서 슬래그를 사용한 제방의 설계나 시공시 슬래그 재료에 토목섬유를 층상으로 보강하여 사용할 경우에는 강도증가 효과에 의해 안전율을 향상시킬 수 있을 것으로 기대된다.

  • PDF

저온하에서의 화강암, 사암의 역학적 거동에 관한 연구 (A Study on Mechanical Behaviors of Granite and Sandstone at Low Temperature)

  • 안경문;박연준;이희근
    • 터널과지하공간
    • /
    • 제7권2호
    • /
    • pp.91-99
    • /
    • 1997
  • To stabilize the energy price, the more storage facilities of energy are required and among the storage methods of LPG and LNG, the method of storage at low temperature under normal confining pressure is considered. It is needed to understand the mechanical and thermal characteristics of rock under temperature variation so that the behaviors of rock can be predicted. In this paper, the variation of the rock charateristics of the Hwangdeung granite and the Boryung sandstone is studied at low temperature. The mechanical characteristics of rock under low temperatures are that as temperature decreased, unaxial compression strength and Young's modulus increased for Hwangdeung granite; strength and Young's modulus in wet condition were greater than those in dry condition. In the case of Boryung sandstone, as temperature decreases unaxial compression strength and Young's modulus increase but decrease below -10$0^{\circ}C$ in dry condition and below -16$0^{\circ}C$ in wet condtion. The mechanical characteristics of rock after cooling to previous temperature and thawing are that uniaxial compression strength and Young's modulus decrease as temperature decreases. Uniaxial compression strength and Young's modulus in wet conditon decrease more than those in dry condition. Brazilian tension strength decreases as temperature decreases.

  • PDF

자장을 이용한 이온화율 증대형 삼극형 BARE에서 이온화율의 증대경향과 QMS를 이용한 이온의 에너지 분포 측정 (Measurement of Ion Energy Distribution using QMS & Ionization Enhancement by usign Magnetic Field in Triod BARE)

  • 김익현;주정훈;한봉희
    • 한국표면공학회지
    • /
    • 제24권3호
    • /
    • pp.119-124
    • /
    • 1991
  • Recently, the trend of research in hard coating is concentrate on developing the process of ionization rate under low operating pressure, to get the thin film with high adhesion and dense microstructures. In this study ionization rate enhancement type PVD process using permanent magnet is developed, which enhances the ionization rate by confining the plasma suppressing the wall loss of electron. By the result to investigate the characteristic of glow discharge, the ionization rate of this process is enhanced about twice as high as that of triod BARE process (about 26%), and more dense TiN microstructures are obtained in this process. Cylindrical ion energy analyzer is made and attached in front of a quadrupole mass filter for the analysis of the energy distribution of reactive gas and activated gas ions from the plasma zone. To analyze the operation mechanism of ion energy analyzer, computer simulation is performed by calculation the electric field environment using finite element method. By these analyses of ion energy distribution of outcoming ions from the plasma zone, it is found that magnetic field enhances ion kinetic energy as well as ionization rate. The other results of this study is that the foundation of feed-back system is constructed, which automatically control the partial pressure of reactive gas. In can be possible by recording the data of mass spectrum and ion energy analysis using A-D converter.

  • PDF

Solution for surrounding rock of strain-softening considering confining pressure-dependent Young's modulus and nonlinear dilatancy

  • Liang, Peng;Gao, Yongtao;Zhou, Yu;Zhu, Chun;Sun, Yanhua
    • Geomechanics and Engineering
    • /
    • 제22권4호
    • /
    • pp.277-290
    • /
    • 2020
  • This paper presents an elastic-plastic solution for the circular tunnel of elastic-strain softening behavior considering the pressure-dependent Young's modulus and the nonlinear dilatancy. The proposed solution is verified by the results of the field measuring and numerical simulation from a practical project, and a published closed-form analysis solution. The influence of each factor is discussed in detail, and the ability of Young's modulus and dilatancy characterizing the mechanical response of surrounding rock is investigated. It is found that, in low levels of support pressure, adopting the constant Young's modulus model will seriously misestimate the surrounding rock deformation. Using the constant dilatancy model will underestimate the surrounding rock deformation. When adopting the constant dilatancy model, as the dilation angle increases, the range of the plastic region increases, and the surrounding rock deformation weakens. When adopting the nonlinear dilatancy, the plastic region range and the surrounding rock deformation are the largest. The surrounding rock deformation using pressure-dependent Young's modulus model is between those resulted from two constant Young's modulus models. The constant α of pressuredependent Young's modulus model is the main factor affecting the tunnel displacement. The influence of α using a constant dilatancy model is much more apparent than that using a nonlinear dilatancy model.

서해안 저소성 점토질 실트 지반의 비배수 전단강도 평가 (Evaluation of Undrained Shear Strength for Clayey Silt with Low Plasticity from the West Coast)

  • 김석조;이상덕;김주현
    • 한국지반공학회논문집
    • /
    • 제32권8호
    • /
    • pp.15-25
    • /
    • 2016
  • 화성 지역의 저소성 실트 지반에 대한 비배수 전단강도를 평가하기 위해 일련의 실내 및 현장 원위치 시험을 수행하였다. 저소성 지반에 대한 비배수 전단강도 산정을 위한 시험의 적용성을 분석하기 위해서 일축압축시험 및 간이 CU 시험을 실시하였으며, 저소성 실트 지반의 경우, 원지반에서 불교란 시료 채취가 적절하게 이루어진다 할지라고 시료 내부의 잔류유효응력이 매우 감소하게 되어, 일축압축강도가 현저하게 과소평가되는 결과가 얻어졌다. 따라서, 해성 점토 지반과 동일한 조건이 갖추어지도록 원위치 유효상재압으로 재압밀시킨 후, 전단시험에서 얻어진 간이 CU 강도, $s_{u(scu)}$의 75%를 설계 비배수 전단강도로 적용한다면, 원위치 전단강도를 적절하게 평가할 수 있는 것으로 분석되었다.

동결온도 조건에서의 화강풍화토 전단강도 특성에 관한 연구 (Shear Strength Characteristics of Weathered Granite Soil below the Freezing Point)

  • 이준용;최창호
    • 한국지반환경공학회 논문집
    • /
    • 제14권7호
    • /
    • pp.19-29
    • /
    • 2013
  • 동토지역에서 지반의 역학적인 특징은 기존 토질역학이론과 다르기 때문에 동토지반 내 응력분포와 파괴조건을 묘사하기 위하여 기존 토질역학을 동토에 적용하는 것은 효과적이지 못하거나 적합하지 않다고 할 수 있다. 따라서, 동토지역에서 구조물의 설계 및 시공을 위해서는 동토역학에 관한 기술 자료의 수집 및 분석, 그리고 체계적이고 전문화된 연구가 필수적으로 요구된다. 극한지에서 나타나는 영구동토지역은 계절에 따라 활동층이 동결 융해를 반복하게 되며, 이에 따라 구조물에 영향을 끼치는 하중조건 또한 변화된다. 특히, 동토의 역학적인 성질들은 온도, 함수비, 입도분포, 상대밀도, 하중을 가하는 속도에 따라 민감하게 반응하기 때문에 동토지역 구조물 설계 및 시공에 있어 다양한 조건에 따른 동토의 역학적인 특징들을 신뢰성 있게 분석할 수 있는 방법이 필수적으로 요구된다. 본 연구에서는 동토의 전단강도 특성을 분석하기 위하여 영하 30도에서 작동 가능한 직접전단시험장비와 대형 냉동 챔버를 활용하였으며, 동결온도, 수직응력, 함수비 및 상대밀도를 달리하여 화강풍화토의 전단강도 특성을 분석하였다. 본 연구에 따르면 수직응력, 함수비 및 상대밀도는 동결온도 조건하에서 화강풍화토의 전단강도 특성에 영향을 끼치는 것으로 나타났다.

수치해석을 이용한 그룹형 석션파일의 수평방향 지지거동 분석 (Horizontal Bearing Behavior of Group Suction Piles by Numerical Analysis)

  • 이주형;이시훈;김성렬
    • 한국지반공학회논문집
    • /
    • 제29권11호
    • /
    • pp.119-127
    • /
    • 2013
  • 최근 해양구조물의 건설이 활발해짐에 따라 해상 부유식 구조체를 경제적으로 지지할 수 있는 새로운 기초형식을 개발하려는 연구가 이루어지고 있다. 본 연구에서는 기존의 대구경 단일형 석션파일 대신에 다수의 중구경 석션파일을 콘크리트 파일캡으로 결합한 그룹형 석션파일 형식에 대하여 연구하였다. 해상 부유식 구조체에 사용되는 기초의 경우 수평방향 하중이 지배적이므로 그룹형 석션파일의 수평방향 지지거동을 3차원 유한요소 해석을 통해 분석하였다. 그룹형 석션파일은 근입깊이가 얕아서 강체기초 거동을 하게 되므로 수평방향 거동을 분석할 때 지표면 부근의 낮은 구속압을 받는 지반의 정밀한 거동 모사가 필요하다. 이를 위하여, 탄성계수, 지반강도 등을 지반 구속압에 따라 증가되도록 모델링하였다. 해석조건은 석션파일 중심간 거리, 그리고 사질토와 점성토의 지반조건 등을 변화시키며 변수연구를 수행하였다. 그 결과, 석션파일 사이의 간격이 증가함에 따라 점차 항복하중이 증가하였으며, 그룹형 석션파일의 항복하중은 S/D=5인 경우 회전을 허용한 단일형 석션파일 항복하중의 약 3배인 것으로 나타났다.

낮은 구속압에서 고결화 혼합재의 미소변형강성 (Small Strain Stiffness of Salt-Cemented Granular Media under Low Confining Pressure)

  • 쭝꽝훙;변용훈;짠밍콰;이종섭
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.448-456
    • /
    • 2010
  • The mechanical behavior of granular soils is affected by particle bonding including natural cementation. This study addresses a simple model of small strain stiffness and salt concentration based on wave measurements of salt-cemented particulate media. Published models of artificially cemented soils with different curing methods and several types of cementation agents are reviewed. Glass beads with the median diameter of D50 = 0.5mm are prepared in rectangular cells using the water-pluviated method in salt water with different concentrations. Piezo disk elements and bender elements embedded in the cell are used for the measurements of compressional and shear waves. The relationships between elastic wave velocities and salt concentration show an exponential function. The measured small strain stiffness matches well the predicted small strain stiffness based on micromechanics for simple cubic monosized sphere particles. This study demonstrates that the salt concentration in salt-cemented specimen may be evaluated by using elastic wave velocities.

  • PDF

지반앵커의 인발저항 특성에 따른 인장.압축 복합 시스템 개발 (Development of Composite Tension.Compression Anchor System based on the pull out resistance characteristics of Ground Anchor)

  • 염호형;임종철;홍석우;김철웅;신철성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.788-795
    • /
    • 2005
  • In this study, the progressive failure and creep of the traditional ground anchor structure were decreased and a new ground anchor that can attain the required pull-out resistance even in soft sandy soils with low confining pressure was developed. Ground anchors are classified depending on the kind of stress the grout is subjected. If the grout material is subjected to tension then it is classified as tension anchor while when the grout material is subjected to compression it is classified as compression anchor. The ground anchor that possesses both the tension and compression mechanism mentioned above is known as composition anchor. It is the objective of this study to develope this type of composition anchor. The structure of the newly developed ground anchor was presented. Pull-out test in different types of soil and the behaviour during Pull-out test was also presented.

  • PDF