• 한국산업보건학회지
• /
• 제3권2호
• /
• pp.227-239
• /
• 1993

The author selected 77 dust emissing processes from 71 types of industries which placed in Sasang Industrial Complex in Pusan. The level of total dust was measured as areal concentration and personal exposure concentration by low volume air sampler and personal air sampler, respectively. Collected samples were classified into 5 groups (chemicals and rubber product, metal product, sawmills and wood, foundries and others). Respirable particulate and total dust of areal and personal exposure were analyzed. The results were as follows; 1. All of the respirable dust concentration and total dust of areal and personal concentration were log-normally distributed. 2. Geometric mean of respirable particulate of personal exposure concentration measured $0.55mg/m^3$ in the first group, $0.86mg/m^3$ in the second group, $0.39mg/m^3$ in the third group, $0.81mg/m^3$ in the forth group and $0.52mg/m^3$ in the fifith group. The exceed rates over TLV (thehold limit values) of total dust were 31.3% in the first group, 31.3% in the second group, 70% in the third group, 80% in the forth group and 13.3% in the fifth group. 3. There were singnificant difference between areal and personal exposure concentration and personal exposure concentration was higher than that of area. 4. In the case of high ratio of respirable particulate to total dust, pneumoconiosis incidence was high even though the workshop was opened and emissing dust concentration was low. These findings suggest that it is desirable to measure respirable particulate in environmental assessment of dust emissing workshops.

• 한국농공학회지
• /
• 제40권3호
• /
• pp.83-92
• /
• 1998

Field experiment was performed from August 1996 to January 1998 to examine the applicability of constructed wetland system for wastewater treatment in rural area. The pilot plant was installed in Kon-Kuk University and the school building septic tank effluent was used as an influent to the treatment basin. Hydraulic loading rate was about 0.1 6$0.16^3/m^2$ day and theoretical detention time in the system was 1.38 days. The treatment basin was composed of sand and reed. The influent DO concentration was low and many cases close to zero, but effluent concentration was higher than the influent which implies that oxygen was supplied naturally. The average concentration of influent BOD was 126mg/L, and with average removal rate of 69 % the average effluent concentration was 4Omg/L which satisfied the effluent water quality standard for the system of interest. The average influent concentration of COD was 2Olmg/L and average effluent concentration was 75mg/L with average removal rate of 60%. The performance of BOD and COD tends to deteriorate in the low temperature, and appropriate action needs to be taken during the cold winter time for stable operation. The average influent concentration of SS was 5Omg/L, and effluent was 1 1mg/L with average removal rate of 76% which satisfied the effluent water quality standard for the system of interest. The results for the regulated components, SOD and SS, from the experiment showed that constructed wetland system can meet the effluent water quality standards. The average influent concentration of total phosphorus was 25.6mg/L and average effluent concentration was 7.8mg/L with average removal rate of 63%. Not like the performance of the above components, average nitrogen removal rate was only 11.2% which is not satisfactory. Although, nitrogen is not regulated at this moment, it can cause many environmental problems including eutrophication. Therefore, nitrogen removal efficiency should be improved for actual application. From the result of the field experiment, constructed wetland system was thought to be an appropriate alternative for wastewater treatment in rural area.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2995-3000
• /
• 2014

A sensitive concentration method utilising modified gas-purge microsyringe extraction (GP-MSE) was developed. Concentration (reduction in volume) to a microlitre volume was achieved. PAHs were utilised as semivolatile analytes to optimise the various parameters that affect the concentration efficiency. The injection rate and temperature were the key factors that affected the concentration efficiency. An efficient concentration (75.0-96.1%) of PAHs was obtained under the optimised conditions. The method exhibited good reproducibility (RSD values that ranged from 1.5 to 9.0%). The GP-MSE concentration method enhances the volume reduction (concentration factor), leading to a low method detection limit ($0.5-15ngL^{-1}$). Furthermore, this method offers the advantage of small-volume sampling, enabling even the detection of diurnal hourly changes in the concentration of PAHs in ambient air. Utilising this method in combination with GC-MS, the diurnal hourly flux of PAHs from the gas phase of ambient air was measured. Indeed, the proposed technique is a simple, fast, low-cost and environmentally friendly.

• 대한지역사회영양학회지
• /
• 제28권5호
• /
• pp.404-413
• /
• 2023

Objectives: This study compared serum lipid concentration according to drinking habits. Methods: We analyzed data from the 7th Korea National Health and Nutrition Examination Survey (KNHANES VII). The study included 8,525 adults (3,651 males and 4,874 females), aged 30 - 59 years. Results: There were differences in age, gender, education level, smoking status, physical activity, and waist circumference between drinkers and abstainers. The serum low-density lipoprotein-cholesterol (LDL-C) level of the drinkers was lower than those of the abstainers (P < 0.05). The serum triglyceride (TG) and high-density lipoprotein-cholesterol (HDL-C) concentrations were highest in the group that consumed alcohol 'more than twice a week' relative to the other groups (P < 0.001). The LDL-C and atherogenic index (AI) levels were lowest in the 'more than twice a week' drinking group compared to the other groups (P < 0.001). The serum TG and HDL-C concentrations were the highest in the '7 glasses/time' group (P < 0.001). The serum LDL-C concentration was the lowest in the '7 glasses/time' group (P < 0.001). Notably, the higher the frequency of binge drinking (7 glasses or more), the higher the concentration of TG (P < 0.001). The serum HDL-C concentration was significantly higher in the 'no binge' and 'more than once a week' groups compared to the other groups (P < 0.001). The serum LDL-C concentration and AI score were the lowest in the 'more than once a week' group (P < 0.001). Conclusions: As the quantity and frequency of drinking increased, the serum TC concentration increased. Moreover, an increase in the serum HDL-C concentration led to a decrease in AI. The factors exacerbating cardiovascular disease increased simultaneously due to drinking. Our results suggest that for individuals with hypertriglyceridemia and patients with low HDL-cholesterolemia, separate guidelines based on the quantity and frequency of alcohol consumption are warranted.

• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.59-68
• /
• 1989

This study was performed employing the two stage aerated submerged biofilter of media pore size 1.5cm and 2cm, and infiuent substrate concentrations were 30.25mg COD/l, 50.1mg COD/l respectively. The purpose was to determine the treatment efficiency at the low concentration infiuent, reaction order and substrate flux with application of variable-order model that was presented by Rittmann and McCarty. . The results are as follows. 1. Treatment efficiency of 1st reactor was about BOD 82% and COD 76%, when effluent concentration was BOD 3.9 ~ 6.8, COD 7.1 ~ 12.5 mg/l, and this effluent concentration didn't satisfy the water quality grade I, II of river and lake. But as treated effluent of 1st reactor with 2nd reactor, we could achieve appropriate water quality, since instillation of 2nd reactor was needed. 2. Difference of media pore size between 1.5cm and 2cm didn't effect significantly to treatment efficiency and since this of 2nd reactor was about BOD 60%, COD 50%, an consideration of economic point of view should be carried out in field application. 3. Reaction order and substrate flux was varied 0.9851~0.9956 and 0.0028~0.0405 mg/$cm^{2} \cdot day$, and the substrate flux was increased as infiuent substrate concentration increased.

• Journal of the korean society of oceanography
• /
• 제36권3호
• /
• pp.59-71
• /
• 2001

In order to investigate the temporal variability of dissolved and particulate trace metals in the Han River, water samples were collected intermittently at two sites for 3 years (August 91 to December 94). Surface seawaters covering the range of salinity were also collected at the estuarine region to evaluate the role of estuary for the riverine fluxes of trace metals within the estuary during October 95 and 96. During the study period, dissolved metal concentrations in riverwaters varied by a factor of 5-10 for Fe, Ni, Co and Cu and 50-100 for Mn, Cd and Pb depending upon the water level; high concentration during the low water and low concentration in high water period except for Fe. The concentration of dissolved Fe increased with increasing water discharge. These concentration-discharge relationships of the studied trace metals are explained by the successive dilution of waters from two different origins, which can be presumably identified as anthropogenic discharges and watershed flushing. Although estuarine waters at early mixing region were not collected due to the difficulty of sampling, mixing behaviors of metals were inferred from the concentration-salinity relationships through the laboratory mixing experiment and field sampling, and distribution coefficients between dissolved and labile particulate phases. It is suggested that the Han River estuary plays a role of accumulating Fe, Mn, Co and Pb from riverine sources due to high turbidity caused by strong tidal current, whereas this system serves as a source of dissolved Cd due to release caused by extended residence time of riverine particles.

• Journal of Microbiology and Biotechnology
• /
• 제8권1호
• /
• pp.8-13
• /
• 1998

Animal cells in culture typically convert most of the glucose they consume into lactate. The accumulation of lactate, however, is commonly cited as one of the factors that inhibit cell growth and limit the maximum cell concentration that can be achieved in culture. The specific production of lactate and the amount of glucose converted to lactate can be reduced when cells are grown in a fed-batch culture in which the residual glucose concentration is maintained at low levels. Such a fed-batch culture was used to grow and adapt hybridoma cells into a low-lactate-producing state before changing into continuous culture. The cells reached and maintained a high viable cell concentration at steady state. In a similar manner, cells that were initially grown in batch culture and a glucose-rich environment reached a steady state with a cell concentration that is much lower. The feed composition and dilution rates for both cultures were similar, suggesting steady state multiplicity. From a processing perspective the desired steady state among those is the one with the least metabolite production. At such seady state nutrient concentration in the feed can be further increased to increase cell and product concentrations without causing the metabolite inhibitory effect typically seen in a cell culture. Controlling cell metabolism in a continuous culture to reduce or eliminate waste metabolite production may significantly improve the productivity of mammalian cell culture processes.

• Journal of Electrochemical Science and Technology
• /
• 제5권4호
• /
• pp.115-127
• /
• 2014

Cd-Pb thin films were electrodeposited from a diluted chloride solution using stainless steel rotating disc electrode. The linear sweep voltammograms of the single metallic ions show that electrodeposition of these ions was mass transfer control due to the plateau observed for different rotations at concentration (50 and 200 ppm). The voltammograms of binary system elucidate that electrodeposition process always start at cathodic potential located between the potential of individual metals. Currents transients measurements, anodic linear sweep voltammetry (ALSV) and atomic force microscopy (AFM) were used to characterize the electrocryatalization process and morphology of thin films. ALSV profiles show a differentiation for the dissolution process of individual metals and binary system. Two peaks of dissolution Cd-Pb film were observed for the binary system with different metal ion concentration ratios. The model of Scharifker and Hills was used to analyze the current transients and it revealed that Cd-Pb electrocrystalization processes at low concentration is governed by three-dimensional progressive nucleation controlled by diffusion, while at higher concentration starts as a progressive nucleation then switch to instantaneous nucleation process. AFM images reveal that Cd-Pb film electrodeposited at low concentration is more roughness than Cd-Pb film electrodeposited at high concentrated solution.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.451-461
• /
• 2006

Laboratory scale experiments were conducted to study the conversion of sludge from conventional activated sludge to nitrogen-phosphorus removal sludge using two types of sequencing batch reactor (SBR) systems, a conventional SBR and sequencing batch biofilm reactor (SBBR). The nitrogen and phosphorus removal characteristics were similar between SBR and SBBR and the removal efficiencies were very low when the influent TOC concentrations were low. The nitrogen and phosphorus removal efficiencies in SBR were 96% and 77.5%, respectively, which were higher than those in SBBR (88% and 42.5%) at the high influent TOC concentration. In SBBR, the simultaneous nitrification-denitrification was occurred because of the biofilm process. The variations of pH, DO concentration and ORP were changed as the variation of influent TOC concentration both in SBR and SBBR and their periodical characteristics were cleary shown at the high influent TOC concentration. Especially, the pH, DO concentration and ORP inflections, were cleary occurred in SBR compared with SBBR.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권10호
• /
• pp.5895-5900
• /
• 2013

Dictamnine (Dic) has the ability to exert cytotoxicity in human cervix, colon, and oral carcinoma cells and dihydroartemisinin (DHA) also has potent anticancer activity on various tumour cell lines. This report explores the molecular mechanisms by which Dic treatment and combination treatment with DHA and Dic cause apoptosis in human lung adenocarcinoma A549 cells. Dic treatment induced concentration- and time-dependent cell death. FCM analysis showed that Dic induced S phase cell cycle arrest at low concentration and cell apoptosis at high concentration in which loss of mitochondrial membrane potential (${\Delta}{\Psi}m$) was not involved. In addition, inhibition of caspase-3 using the specific inhibitor, z-DQMD-fmk, did not attenuate Dic-induced apoptosis, implying that Dic-induced caspase-3-independent apoptosis. Combination treatment with DHA and Dic dramatically increased the apoptotic cell death compared to Dic alone. Interestingly, pretreatment with z-DQMD-fmk significantly attenuated DHA and Dic co-induced apoptosis, implying that caspase-3 plays an important role in Dic and DHA co-induced cell apoptosis. Collectively, we found that Dic induced S phase cell cycle arrest at low concentration and cell apoptosis at high concentration in which mitochondria and caspase were not involved and DHA enhanced Dic induced A549 cell apoptosis via a caspase-dependent pathway.