• Journal of Korean Vacuum Science & Technology
• /
• 제5권2호
• /
• pp.38-42
• /
• 2001

We investigated physical properties of ion-beam mixed Fe/si multilayerd films(MLF) prepared by rf sputtering onto glass substrates at room temperature. Such an ion-beam treatment has led to noticeable changes in the structural and physical properties of the MLF: the formation of a new phase which is characterized by a crystalline silicide with a low coercivity and Tc = 550 K. In contrast to the as-prepared state, the ion-beam mixed MLF contains two magnetic phases. One of them is a very soft (Hc < 2 Oe), but microscopically homogeneous one with M$\sub$eff/=6.7 kG.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제11회 학술발표회 논문개요집
• /
• pp.120-120
• /
• 1996

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.343-356
• /
• 2016

As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.1061-1068
• /
• 2013

본 논문에서는 ESPAR(Electronically Steerable Parasitic Array Radiator) 안테나를 이용한 $M{\times}M$ BS-MIMO(beam space multiple input multiple output) 시스템을 제안한다. 기존 MIMO 시스템은 전송 데이터 신호를 다수의 안테나에 맵핑시켜 전송하기 때문에 다수의 RF 체인이 필요한 문제점이 있다. 다수의 RF 체인은 하드웨어의 비용을 및 RF 회로의 전력 소모를 증가 시킨다. 또한, 휴대폰과 같이 공간적인 제약이 큰 모바일 장비에서 MIMO 시스템을 사용하기 어렵다. 이러한 문제를 해결하기 위해서 단일 RF 체인을 가지는 ESPAR 안테나를 사용하여 빔 공간에서 신호를 맵핑시키는 BS-MIMO 시스템이 제안되었다. 본 논문에서는 BS-MIMO 시스템 기법에 대해서 설명하고 이를 확장한 $M{\times}M$ BS-MIMO 전송 기법의 설계 및 성능을 분석한다. 컴퓨터 모의실험을 통한 성능 확인 결과 제안된 BS-MIMO 전송기법은 기존 MIMO 기법과 비교하여 거의 동일한 수신 BER 성능을 얻는다. 따라서 다수의 RF 체인을 가지는 기존 MIMO 시스템과 비교하여 BS-MIMO 시스템은 단일 RF 체인을 가지고 MIMO 전송이 가능하며, 이로 인해서 하드웨어 비용 및 RF 회로의 전력 소모를 획기적으로 줄일 것으로 예상된다.

• 폴리머
• /
• 제37권3호
• /
• pp.302-307
• /
• 2013

Glycerol diglycidyl ether와 acrylic acid를 반응하여 지방족 에폭시 아크릴레이트를 합성하였다. 반응 경과는 적외선 분광법, 라만 분광법과 $^1H$ NMR로 분석하였다. 합성한 에폭시 아크릴레이트의 전자선 조사에 의한 경화거동을 조사하기 위해 전자선 조사량에 따른 시료의 분광 분석과 유리전이온도 분석, 인장 특성 등을 분석하였다. 이를 통해 약 30 kGy 정도의 저조사량에서 충분한 경화가 이루어짐을 확인하였다. 또한 합성한 에폭시 아크릴레이트는 점도가 낮아 용매 사용 없이 코팅용으로 사용하기에 적합하며, 경화 시편이 높은 광학적 투과도를 가지고 있어 광학적 투명도를 요구하는 전자선 경화형 광학필름 코팅용에 적합할 것으로 생각된다.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• 한국식품영양과학회지
• /
• 제44권1호
• /
• pp.128-136
• /
• 2015

전자선 조사에 의한 수입 오렌지의 품질 특성을 조사하여 방사선 식품 검역 관리의 기초자료로 활용하기 위하여 미국산 Navel orange에 선량 0.2, 0.4, 0.6, 0.8, 1.0 kGy의 전자선을 조사하여 저온($3{\pm}2^{\circ}C$)에서 45일간 저장하면서 이화학적 품질 특성을 조사하였다. 색도, 당산비, 총당 및 환원당 함량, 비타민 C 함량은 조사선량과는 관계없이 저장기간에 따른 변화를 보였다. 경도는 저장 초기에 1 kGy의 조사구에서 유의적으로 감소하였다가 저장 후기에는 그 차이가 점차 감소하며 비조사구와 다른 조사구가 유사한 경향을 나타냈다. 관능평가에서는 신맛과 조직감을 제외한 모든 항목에서 조사선량과 저장기간이 증가할수록 감소하였고, 0.8 kGy 이상의 조사구는 색을 제외한 모든 항목에서 낮은 선호도를 보였다. 1 kGy 이하의 전자선 조사는 오렌지의 이화학적 품질 특성에 큰 영향을 미치지 않는 것으로 나타났으나 0.8 kGy 이상의 전자선 조사가 관능적 품질 특성에 좋지 않은 영향을 미치는 것으로 보아 품질변화를 최소화하는 동시에 해충 방제 효과를 얻기 위한 최적의 선량은 0.6 kGy 이하로 판단된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2005년도 추계학술발표회 및 workshop
• /
• pp.178-178
• /
• 2005

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.571-583
• /
• 2017

A kind of accordion-web RBS connection, "Tubular Web RBS (TW-RBS)" connection is proposed in this research. TW-RBS is made by replacing a part of web with a tube at the desirable location of the beam plastic hinge. This paper presents first a numerical study under cyclic load using ABAQUS finite element software. A test specimen is used for calibration and comparison of numerical results. Obtained results indicated that TW-RBS would reduce contribution of the beam web to the whole moment strength and creates a ductile fuse far from components of the beam-to-column connection. Besides, TW-RBS connection can increase story drift capacity up to 9% in the case of shallow beams which is much more than those stipulated by the current seismic codes. Furthermore, the tubular web like corrugated sheet can improve both the out-of-plane stiffness of the beam longitudinal axis and the flange stability condition due to the smaller width to thickness ratio of the beam flange in the plastic hinge region. Thus, the tubular web in the plastic hinge region improves lateral-torsional buckling stability of the beam as just local buckling of the beam flange at the center of the reduced section was observed during the tests. Also change of direction of strain in arc shape of the tubular web section is smaller than the accordion webs with sharp corners therefore the tubular web provides a better condition in terms of low-cycle fatigue than other accordion web with sharp corners.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.43-43
• /
• 2008

Recently, it is widely studied to liquid crystal (LC) alignment using ion-beam exposure. Because conventional rubbing method has some problems such as defects from dust and electrostatic charges and rubbing scratch during rubbing process. Moreover rubbing method needs cleaning process to remove these defects. Therefore rubbing-free techniques like ion-beam method are strongly required. We studied LC alignment by controlling ion-beam irradiation angles and electro-optical (EO) characteristics of twisted nematic LC on the polyimide surface. In this experiment, a good uniform alignment of the nematic liquid crystal (NLC) with the ion-beam exposure on the polyimide (PI) surface was observed. We also achieved low pretilt angle as function of ion-beam irradiation angles. X-ray photoelectron spectroscopic (XPS) analysis provided chemical evidence for LC alignment by controlling ion-beam irradiation angles. In addition, it can be achieved the good EO properties of the ion-beam-aligned twisted nematic liquid crystal display (TN-LCD) on PI surface. Some other experiments results and discussion will be included in the presentation.