• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1033-1034
• /
• 2005

High resolution 2.1” QVGA LTPS LCD (190ppi) having high aperture ratio of 65% could be successfully developed using state-of-the-art SLS technology and active/gate storage structure. Cost effective P-MOS 6-Mask structure was used. Full gate and transmission gate circuits are integrated in the panel. The high aperture ratio was obtained by using active/gate capacitance structure, which can reduce storage capacitance area. The aperture ratio was increased to 65% from 49% of conventional gate/data capacitance structure. The brightness was increased from 180cd to 270cd without any degradation of optical properties such as contrast ratio, flicker or crosstalk.

• Steel and Composite Structures
• /
• v.17 no.3
• /
• pp.287-303
• /
• 2014

8 steel reinforced concrete (SRC) columns with the encased steel ratio of 13.12% and 15.04% respectively were tested under the test axial load ratio of 0.33-0.80 and the low-frequency cyclic lateral loading. The cross sectional area of composite columns was $500mm{\times}500mm$. The mechanical properties, failure modes and deformabilities were studied. All the specimens produced flexure failure subject to combined axial force, bending moment and shear. Force-displacement hysteretic curves, strain curves of encased steels and rebars were obtained. The interaction behavior of encased steel and concrete were verified. The hysteretic curves of columns were plump in shapes. Hysteresis loops were almost coincident under the same levels of lateral loading, and bearing capacities did not change much, which indicated that the columns had good energy-dissipation performance and seismic capacity. Based on the equilibrium equation, the suggested practical calculation method could accurately predict the flexural strength of SRC columns with cross-shaped section encased steel. The obtained M-N curves of SRC columns can be used as references for further studies.

• Computers and Concrete
• /
• v.23 no.5
• /
• pp.335-349
• /
• 2019

A low-cycle loading experiment of 16 transfer column specimens was conducted to study the influence of parameters, likes the extension length of shape steel, the ratio of shape steel, the axial compression ratio and the volumetric ratio of stirrups, on the shear distribution between steel and concrete, the concrete damage state and the degradation of lateral stiffness. Shear force of shape steel reacted at the core area of concrete section and led to tension effect which accelerated the damage of concrete. At the same time, the damage of concrete diminished its shear capacity and resulted in the shear enlargement of shape steel. The interplay between concrete damage and shear force of shape steel ultimately made for the failures of transfer columns. With the increase of extension length, the lateral stiffness first increases and then decreases, but the stiffness degradation gets faster; With the increase of steel ratio, the lateral stiffness remains the same, but the degradation gets faster; With the increase of the axial compression ratio, the lateral stiffness increases, and the degradation is more significant. Using more stirrups can effectively restrain the development of cracks and increase the lateral stiffness at the yielding point. Also, a formula for calculating the yielding lateral stiffness is obtained by a regression analysis of the test data.

• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.485-503
• /
• 2015

This study aims at evaluating geomorphological classification systems to predict the occurrence of landslides in mountainous region in Korea. Geomorphological classification systems used in this study are Catena, TPI, and Geomorphons. Study sites are Gapyeong-gun, Hoengseong-gun, Gimcheon-si, Yeoju-si/Yicheon-si in which landslide occurrence data were collected by local governments from 2001-2014. Catena method has objective classification standard to compare among regions objectively and understand the result intuitively. However, its procedure is complicated and hard to be automated for the general public to use it. Both TPI and Geomorphons have simple procedure and GIS-extension, therefore it has high accessibility. However, the results of both systems are highly dependent on the scale, and have low relevance to geomorphological formation process because focusing on shape of terrain. Three systems have low compatibility, therefore unified concept are required for broad use of landform classification. To assess the effectiveness of prediction on landslide by each geomorphological classification system, 50% of geomorphological classes with higher landslide occurrence are selected and the total landslide occurrence in selected classes are calculated and defined as 'predictive ability'. The ratio of terrain categorized by 'predictive ability' to whole region is defined as 'vulnerable area ratio'. An indicator to compare three systems which is predictive ability divided by vulnerable area ratio was developed to make a comprehensive judgment. As a result, Catena ranked the highest in suitability.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.447-456
• /
• 2013

This study was carried out for the establishment of theory and foundational data for breeding, on variegated foliage plants using for potted plants, based on examination and analysis for shape, color, and area ratio of variegated leaves and chlorophyll contents. Six families, 18 genus, and 54 species of variegated plants domestically distributed in Korea were used as the plant materials. Patterns based on chlorophyll-deficient part in variegated leaves were divided into 20 types, such as steps, border, collapsed border, sandy border, half, silk, stars, vein, firewood, border and firewood, center, entirety, leaf, irregular, net, watermelon, melon, and so on. There were 10 kinds of colors including dark green, red, dark red, reddish white, reddish yellow, white, silver, silvery white, yellowish white, and yellow. The ratio of variegated area was ranged from 5.8% to 100% and it was diverse depending on species or cultivar. The ratios by patterns were highest in entirety (98.6%) and relatively high in step (60.8%), whereas, low in boarder, star and firewood (33.6-36.4%), and relatively low in half and vein (43%). Chlorophyll content of variegated leaf was rather lower compared to normal plants and chlorophyll b tended to be higher in ratio of chlorophyll a to b. Particularly content of chlorophyll b in Stromanthe sanguinea 'Triostar', Dracaena fragrans 'Massangeana Compacta', D. reflexa 'Song of India', and Tradescantia spathacea was higher than chlorophyll a in comparison with that of normal plants.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.7-15
• /
• 2008

This research is significant in terms of estimating the validity by setting evaluation items in view of integrating not only original beauty and visual areas but also natural ecological areas based on questionnaire. The results are as follows. 1) According to literature study, 17 items such as variety, the character of sites in terms of landscape, the beauty of landscape, visibility, and ratio of green visibility are selected. Also, 21 items such as variety of animals and plants species, size of green area, and ecological naturalness are selected in the area of landscape ecological resources. 2) As a result of questionnaire of the group of landscape experts, animals and plants ecological areas show 5.6341, the highest in importance analysis according to assessment areas. Also, as a result of importance analysis on items in each area, for example, in the area of visual resources, the item of skyline analysis is 6.0488, the highest. 3) As a result of corelation of item meaning on landscape effect assesment, for example, meaningness of psychological assessment item and landscape site item indicate 0.710, the highest coefficient correlation. 4) As critical assessment items per unit project, items such as damage minimization of original land features for project in terms of point, ratio of green visibility, variety of animals and plants species marked above 8.0 as high important medium. The project in terms of line, minimization of original land features, preservation of worthy biotope showed high point and the character of sites in terms of landscape, minimization of original land features, the size of green area, and analysis of skyline marked above 8.5 as high importance points. On the contrary, items for climate and soil showed relatively low points.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.224-232
• /
• 2008

Sport industry creates value-added by production and distribution of product or service related with sports or sports. Professional sports will lead to major area of sport service industry in the future. The purpose of study is to analyze financial condition and management performance by using financial statement(2005-2007) of korean professional soccer citizen teams. The analysis of financial condition and management performance is executed by financial ratio analysis method. The content of this study involve comparison with standardization ratio and financial ratios among professional soccer citizen teams. The results of this study are as follows. First, liquidity ratio measured by current ratio and quick ratio was high with compared to standardization ratio. Second, leverage ratio measured by debt ratio was very high. Third, activity ratio was good condition. Finally, profitability ratio was very low having minus ratio generally.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.37-47
• /
• 2002

Recently gasoline direct injection method has been applied to gasoline engine to reduce fuel consumption rate by controlling fuel air mixture on lean condition by means of stratified charging, and to reduce simultaneously. Pollutant emissions especially NOx and CO by lowering the combustion temperature. But difficulty of controling local fuel air ratio at ignition area in flammability limit unavoidably appeared, because it is merely controlled by injection timing with spatial and temporal distribution of fuel mixture. In this study, the authors devised a uniquely shaped combustion chamber so called three-chamber GDI engine, intended to keep the more reliable fuel air ratio at ignition area. The combustion chamber is divided into three regions. The first region is in the rich combustion division, where the fuel is injected from the fuel injection valve and ignited by the spark plug. The second region is in the lean combustion division, where the combustion gas from the rich combustion division flows out and burns on lean condition. And the last region is in the main combustion division ie in the cylinder, where the gas from the above two combustion divisions mixed together and completes the combustion during expansion stroke. They found that the stable range of operation of three-chamber GDI engine on low-load condition exists in the lean area of average equivalence ratio. And they also found that the reformed engine reveals less specific fuel consumption and less pollutant emissions compared with conventional carburettor type gasoline engine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.151-156
• /
• 2002

The heritability of sink-source characters was estimated by regression coefficient between F$_2$ and F$_{5}$ in two crosses of IR 66738-118-1-2/Gayabyeo and the Ilpumbyeo/YR 15965 Acp 33. In order to get the some basic information for breeding of high yielding rice, genetic resources of new plant type with low tiller and heavy panicle were used. Most of the sink and source characters in Ilpumbyeo/YR 15965 Acp 33 cross showed high heritability over than 0.224. But the specific leaf area and sink-source ratio displayed low heritability being 0.009 and 0.013, respectively. Heritability of all sink and source characters in IR 66738-118-1-2/Gayabyeo cross ranged from 0.115 to 0.247. Correlation coefficient between yield and yield components in both combination were in the ranged between 0.001 and 0.247. But correlations among the yield components were not significant. Correlations between the yield and sink-source characters in both combinations were also highly significant. Particularly, correlation between the grain tiling ratio and most of the sink-source characters in IR 66738-118-1-2/Gayabyeo cross were not significant. In Ilpumbyeo/YR 15965 Acp 33 cross, correlations between grain filling ratio and source characters were positively significant. but sink characters (sink capacity and sink-source ratio, etc) were negatively significant.

• Journal of the Korean Dietetic Association
• /
• v.11 no.1
• /
• pp.86-94
• /
• 2005

This study was conducted to examine bone mineral density and factors which effect on bone mineral density such as daily nutrients intake, age, menarch age and physical condition among healthy female college students in Daegu area from April 20, to May 20, 2004. 1. Average age was 20.5$\pm$0.96 years old, average height was 160.9$\pm$4.30㎝, and average weight was 55.9$\pm$7.67㎏. Body mass index was 21.6$\pm$2.91㎏/㎡, body fat was 25.6$\pm$5.79％, menarche age was average 12.5$\pm$1.1 years old and WHR(waist/hip circumference ratio) was 0.8$\pm$0.01㎝/㎝. 2. Average level of bone mineral density(T-score -0.56$\pm$0.91) was in normal range. But, 11 persons(24.4％) are over T-score -1.0, 33 persons(73.4％) were within -1.0 - -2.5 and one person(2.2％) was under -2.5. It is very anxious level for Osteopenia-low bone mass, as research result shows 73.4% of the subject of examine on the level of Osteopenia. 3. Daily calorie intake was 2,550㎉ and each nutrient intake, compared to the seventh recommended dietary allowances for korean, was as follows ; Calorie 112％, protein 123％, calcium 78％, phosphorus 137％, iron 68％, vitamin A 101％, vitamin $B_1$ 141％, vitamin $B_2$ 95％, niacin 107％, vitamin C 128％ and zinc 120％. The ratio of calcium to phosphorus(Ca/P) is 0.66, low compared to RDA, but phosphorus intake is so high compared to RDA that precautions should be taken. The ratio of calcium to protein(Ca/Protein) is 8.55. 4. Menarche age and bone mineral density of calcaneus showed positive correlation and body mass index(BMI) indicated positive correlation. Age, height, weight. WHR and physical activity coefficient all do not indicate any significant correlation with bone mineral density. 5. Intake of Calorie, Ca, Ca/p ratio, carbohydrate and fat intake were positively correlated and, protein was negatively correlated, and Fe, Na, P and cholesterol were negatively correlated with BMD. These results indicate that average bone mineral density of subjects was in normal range, but subjects in the stage of osteopenia-low bone mass are many and bad effects are expected to have on their bone mineral density after menopause. Therefore, in order reach maximal bone mineral density, they should improve the balance between calcium and phosphorus and reduce salt intake. And it is thought that education and profound studies on relevant factors affecting the genesis of bone mineral density should be made.