• Journal of the korean society of oceanography
• /
• v.34 no.2
• /
• pp.86-94
• /
• 1999

An investigation was conducted to determine limiting nutrients in the bay systems of the southern coastal area of Korea. The elemental composition of C, N, and P in suspended particulate matter was monitored nearly monthly in Chinhae and Koje Bays and seasonally in Deukryang Bay for 2 years. Atomic C:N ratio in particulate matter ranges from 4.3 to 9.6, typical of marine phytoplankton. C:P and N:P ratios vary from the Redfield ratio to 229 (C:P) and 37 (N:P). A constant C:N ratio of 6.87 from regression of particulate C and N concentrations demonstrates that the particulate matter in the systems originates from primary production. C:P and N:P ratios from regression of C on P and N on P are well associated with changes in salinity. The low N:P ratio of 13.1 implies N limitation in the environments of the systems. This seems to result from the low N:P ratio of nutrients released across sediment-water interface. Phytoplankton response, expressed here as the increase of chlorophyll a, to N addition also verifies N limitation for phytoplankton communities. In heavy rainfall season (from June to September), the addition of excessive N via streams into the stratified coastal water proliferates phytoplankton greatly. During the phytoplankton blooms, C:P and N:P ratios are much higher than the Redfield ratio, implying P limitation. This results from the high N:P ratio in nutrients supplied from stream waters. Strong stratification during the blooms also interrupts the supply of nutrients, particularly p, from bottom waters. Dependent upon precipitation, this tendency shows great inter-annual variation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.201-215
• /
• 2002

In this paper, we use a structural equation model to diagnose success factors on commercialization of information and communication technology considering the characteristics of commercialization process in terms of the type of technology, technology provider and technology receiver. The results of our study indicated the following. The transferor's research ability has significant effects on the commercialization by small businesses with low R&D expenditure to sales ratio, and the business management ability plays an important role in the commercialization by the relatively large (over 100 employees) companies with low R&D expenditure ratio. During the commercialization of the technology independently researched by government run institute or university, the transferee's business management ability is crucial to success. To those companies which run the existing business with high R&D expenditure ratio, their ability to utilize technology is essential. When the independently researched technology is used in the new business, the companies' business management ability and the role of technology transfer center are the important factors on the commercialization. Based on these findings, we suggest some strategies to effectively promote R&D efforts for successful commercialization.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.569-576
• /
• 1999

In this study, the effect of the microstructural evolution on the electrical of Cu-Ag microcomposite was investigated. The nature of interfaces between silver filaments and Cu matrix may have pronounced effects on the physical properties of Cu-Ag filamentary microcomposites, little is known about these interfaces. In heavily drawn Cu-Ag filamentary microcomposities, the microstructure is too fine and the interfacial area is too large to maintsin a stable internal dislocation structure because of closely spaced filaments. Rather, most dislocations are thought to be gradually absorbed at the interfaces as the draw ratio increases. The mechanical and electrical properties of Cu-Ag filamentary microcomposites wires were also examined and correlated with the microstructural change caused by thermomechanical treatments. The study on the electrical conductivity combined to resistivity in Cu-Ag filamentary microcomposites and the rapid increase of the electrical conductivity at high annealing temperatures is mainly caused by the dissolution and coarsening of silver filaments. The relatively low ratio of the resistivities is mainly caused by the dissolution and coarsening of silver filaments. The relatively low ratio of the resistivities at 295K($\rho$\ulcorner/$\rho$\ulcorner) in as-drawn Cu-Ag microcomposites can also be explained by the contribution of the interface scattering.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.212-222
• /
• 1998

Heat transfer performance improvement by fin and groovs is studied for condensation of R-11 on integral-fin tubes. Eight tubes with trapczodially shaped integral-fins having fin density from 748 to 1654fpm(fin per meter) and 10, 30 grooves are tested. A plain tube having the same diameter as the finned tubes is also used for comparison. R-11 condensates at saturation state of 32 $^{\circ}C$ on the outside tube surface coded by inside water flow. All of test data are taken at steady state. The heat transfer loop is used for testing singe long tubes and cooling is pumped from a storage tank through filters and folwmeters to the horizontal test section where it is heated by steam condensing on the outside of the tubes. The pressure drop across the test section is measured by menas pressure gauge and manometer. The results obtained in this study is as follows : 1. Based on inside diameter and nominal inside area, overall heat transfer coefficients of finned tube are enhanced up to 1.6 ~ 3.7 times that of a plain tube at a constant Reynolds number. 2. Friction factors are up to 1.6 ~ 2.1 times those of plain tubes. 3. The constant pumping power ratio for the low integral-fin tubes increase directly with the effective area to the nominal area ratio, and with the effective area diameter ratio. 4. A tube having a fin density of 1299fpm and 30 grooves has the best heat transfer performance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.1
• /
• pp.80-86
• /
• 2024

We analyzed the performance of hubless rim propellers based on the number of blades, maintaining a fixed pitch ratio and expanded area ratio, using computational fluid dynamics (CFD). Thrust coefficient, torque coefficient and efficiency according to the number of blades were analyzed. In addition, the pressure distribution on the discharge and suction sides of the blade was analyzed. As the advance ratio increases, the thrust coefficient decreases. The highest thrust was shown when the advance ratio was lowest. For the three, four, five and six-blades, the torque coefficient tended to decrease as the advance ratio increased. In the case of seven and eight-blades, the torque coefficient tended to increase as the advance ratio increased. The maximum efficiency was found when the advance ratio was 0.8. When the three-blade, it showed high efficiency at all advance ratios. A high pressure distribution was observed at the leading edge of the discharge blade, and a low pressure distribution was observed at the trailing edge. Applying a hubless rim-driven thruster with the three-blade can generate higher thrust and increase work efficiency.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.568-574
• /
• 2012

Objectives: The purpose of this experiment is to understand the phosphorus removal ratio effects of iron plates per unit of surface area through the iron electrolysis system, which consists of an anoxic basin, aerobic basin, and iron precipitation apparatus. Methods: Iron electrolysis, which uses an iron precipitation reactor in anoxic and oxic basins, consisted of iron plates with total areas of 400 $cm^2$, 300 $cm^2$ and 200 $cm^2$ respectively. The FNR process was operated with a hydraulic retention time and a sludge retention time of 12 hours and three days, respectively. Wastewater used in the experiments was prepared by dissolving $KH_2PO_4$ in influent water. Results: The iron plates 400 $cm^2$ (16.6 $mA/cm^2$), 300 $cm^2$ (13.3 $mA/cm^2$) and 200 $cm^2$ (7.3 $mA/cm^2$) in surface area in the phosphorus reactor had respective phosphorus of 2.4 mg/l, 2.7 mg/l and 3.2 mg/l in the effluent and phosphorus removal respective efficiencies of 90.3%, 89.1% and 87.1%. The effluent in the reactor, where the iron plate was not used, had relatively very low phosphorus removal efficiency showing phosphorus concentration of 15.3 mg/l and a phosphorus removal efficiency about 38.3%. Phosphorus removal per ferrous was 0.472 mgP/mgFe in the iron electrolysis system where the surface area of iron was low. Phosphorus pollution load per active surface area and the phosphorus removal efficiency had an interrelation of RE = -0.27LS + 89.0 (r = 0.85). Conclusion: With larger iron plate surface area, the elution of iron concentration and phosphorus removal efficiency was higher. The removal efficiency of phosphorus has decreased by increasing the initial phosphate concentration in the iron electrodes. This shows a tendency of decreasing phosphorus removal efficiency because of decreasing of iron deposition as the phosphorus pollution load per active surface area increases.

• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1267-1274
• /
• 2017

A Controlled Low-Strength Materials (CLSM) is suitable for mine backfilling because it does not require compaction owing to it high fluidity and can be installed quickly. Therefore, a CLSM utilizing $CO_2$-solidified Circulating Fluidzed Bed Combustion (CFBC) coal ash was developed and it's properties were investigated, since. $CO_2$-solidification of CFBC coal ash can inhibit exudation of heavy metals. The chemical composition and specific surface area of Pulverized coal Combustion fly ash and CFBC fly ash were analyzed. The water ratio, compressive strength and length change ratio of CLSM were confirmed. The water ratios differed with the specific surface area of the CLSM. It was confirmed that the porosity of CLSM affected its compressive strength and length change ratio.

• Composites Research
• /
• v.32 no.6
• /
• pp.307-313
• /
• 2019

Triboelectric nanogenerators (TENGs), which are combined effects of triboelectricity and electric induction, is a large-area and low-cost technology that can be applied easily in our life. In this work, we applied life supplies to TENGs and analyzed a type of chemical bonding with the ratio of C-C/C-H/C-O/C=O bonding. As the ratio of C-C bonding increases, the materials can be positively charge. On the other hands, as the ratio of C-H bonding increases, the materials can be negatively charged materials. Based on these behaviors, we got a voltage of 210V, a current of 14.6 ㎂ and a maximum power of 9.8mW. Finally, we could turn on 97 light emitting diodes (LEDs) by using a wrap as a negative material and a magnetic note as a positive material.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.110-113
• /
• 2005

This paper presents flow regime maps of two-dimensional, planar diffusers with constant-area ducts at very low Reynolds numbers. They are obtained from numerical calculations using the commercial CFD program CFD-ACE+. The Reynolds numbers considered are 63, 105, and 210. For each Reynolds number, a wide range of geometric parameters of dimensionless diffuser length, which is a ratio of diffuser length to throat width, $1 and divergence half angle $1^{\circ}<\phi<50^{\circ}$ are selected to obtain steady-state solutions. These maps can be served as a guideline to designers for very low Reynolds number diffuser flows.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.616-620
• /
• 2006

IEEE 802.15.4 is designed for low-rate wireless personal area networks (LR_WPAN) and it attempts to provide a low data rate, low power, low cost wireless networking on the device-level communication. In this paper, I have established a realistic environment for the effect of collision in nonbeacon-enabled mode and beacon enabled mode. The data throughput and delivery ratio are investigated as the performance metrics.