• 제목/요약/키워드: Low Volume Cement Concrete

검색결과 65건 처리시간 0.029초

고강도 고로슬래그 혼합 시멘트 페이스트의 수화 및 포졸란 반응에 미치는 고로슬래그 미분말의 치환률과 분말도의 영향 (Effects of Replacement Ratio and Fineness of GGBFS on the Hydration and Pozzolanic Reaction of High-Strength High-Volume GGBFS Blended Cement Pastes)

  • 정지용;장승엽;최영철;정상화;김성일
    • 콘크리트학회논문집
    • /
    • 제27권2호
    • /
    • pp.115-125
    • /
    • 2015
  • 본 연구는 물-결합재비 20%를 가지는 고강도 고함량 고로슬래그 혼합 시멘트 페이스트의 유동성, 수화열, 응결시간 그리고 강도 발현 특성, 수화 및 포졸란 반응 특성 등을 실험을 통해 관찰하고, 이를 통해 고로슬래그 미분말의 치환률과 분말도가 수화 및 포졸란 반응에 미치는 영향을 분석하였다. 연구 결과에 따르면 물-결합재비가 낮은 고강도 배합에서는 고로슬래그 미분말로 시멘트를 대체함으로써 시멘트와 결합하는 자유수가 상대적으로 증가하는 dilution effect에 의해 시멘트의 초기 수화가 촉진되어 재령 3일부터 28일까지의 초기 강도는 보통 포틀랜드 시멘트만을 사용한 배합보다 더 높게 나타났다. 반면, 재령이 증가하면서 수화반응속도가 급격히 낮아지고, 고로슬래그 미분말로 시멘트를 대량 치환함에 따라 수산화칼슘이 충분히 공급되지 못하므로 포졸란 반응도가 낮아져 장기강도의 발현이 억제되는 것으로 나타났다. 또한 고로슬래그의 분말도가 높으면 자유수를 더 많이 흡착함으로써 유동성이 저하되고 수화도가 낮아져 강도가 오히려 저하되는 것으로 나타났다. 이와 같은 결과는 보통 강도 콘크리트와는 다른 경향을 나타내는 것으로 향후 콘크리트 배합에 대해 추가 검증이 필요하며, 고로슬래그 미분말을 대량 혼합한 고강도 콘크리트의 개발을 위해서는 장기 강도의 발현율을 더 높일 수 있는 방안에 대한 연구가 필요하다.

Effect of waste glass as powder and aggregate on strength and shrinkage of fiber reinforced foam concrete

  • Mayada A. Kareem;Ameer A. Hilal
    • Advances in materials Research
    • /
    • 제12권4호
    • /
    • pp.331-349
    • /
    • 2023
  • Foam concrete can be considered as environmental friendly material due to its low weight, its minimal cost and a possibility to add waste materials in its production. This paper investigates the possibility of producing foam concrete with waste glass as powder and aggregate. Then, the effect of using waste glass on strength and drying shrinkage of foam concrete was examined. Also, the effect of incorporating polypropylene fibers (12 mm length and proportion of 0.5% of a mix volume) on distribution of waste glass as coarse particles within 1200 kg/m3 foam concrete mixes was evaluated. Waste glass was used as powder (20% of cement weight), as coarse particles (25%, 50% and 100% instead of sand volume) and as fine particles (25% instead of sand volume). From the results, the problem of non-uniform distribution of coarse glass particles was successfully solved by adding polypropylene fibers. It was found that using of waste glass as coarse aggregate led to reduce the strength of foam concrete mixes. However, using it with polypropylene fibers in combination helped in increasing the strength by about 29- 50% for compressive and 55- 71% for splitting tensile and reducing the drying shrinkage by about (31- 40%). In general, not only the fibers role but also the uniformly distributed coarse glass particles helped in improving and enhancing the strength and shrinkage of the investigated foam concrete mixes.

수화열 발생인자가 지하철 콘크리트 구조물의 내구설계에 미치는 영향 (Effect of the factor developing the Heat of Hydration on Durability Design in the Subway Concrete Structure)

  • 임영수;김은겸;성기한
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.1131-1137
    • /
    • 2004
  • With the recent continuous expansion of subways, newly created subways tend to have lower locations and wider sections. Furthermore. since box structures and evacuating tunnels are classified into a category of mass-concrete. the thermal-stress, emitted from the inside. causes cracks to structures from the inception of constructing. In this paper, thermal-stress analysis and durability evaluation of box structure were carried out to investigate relationship between durability and parameter causing the heat of hydration. Through the examination, this paper tries to find out satisfactory solutions to regulated thermal crack and ensure the required duration period. The results of this paper showed that to control thermal crack and guarantee the required duration period it was more effective to use low-heat-portland cement and moderateheat-portland cement. As cement volume due to reduction of water-cement ratio increased, the possibility of thermal cracks occurrence increased but results of durability evaluation was different depending on evaluation method. The results showed that the appropriate water-cement ratio to control the heat of hydration and satisfy the required durability was $45\∼55\%$. And it was showed that during placement of concrete blocks ambient temperature affect the heat of hydration. thermal crack and long-term durability largely and when concrete was placed at low temperature to control thermal crack. it need to try to guarantee the required duration period. Henceforth, by studying not only internal and external conditions, such as the relative humidity and the unit weight. but also methods, to evaluate durability, in accordance with domestic situations, more reasonable design of durability should be achieved.

  • PDF

시멘트 페이스트에서 유동성과 입도분포와의 관계 (The Relationship between Rheology Properties and Particle size distribution in Cement paste)

  • 황해정;이승헌;이원준;김원기
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 추계 학술발표회 논문집
    • /
    • pp.721-724
    • /
    • 2006
  • In this study, particle size distribution of cement powder system were adjusted using the blast furnace slag powder, Blaine $2250cm^2/g\;and\;8300cm^2/g$, which easy to adjust particle size distribution to examine how particle size distribution of the binder has an effect on rheological properties of the cement paste. In addition, the relationship between n-value of Rosin-Rammler function and plastic viscosity were discussed. All measured flow curves represented thixotropy behavior and the hysteresis area was smaller for the more added coarse particle. When the combination was based on a ratio of $20{\sim}25vol%$ fine particles, $30{\sim}40vol%$ OPC and $40{\sim}45vol%$ coarse particles of the total volume, a high fluidity and low yield strength was achieved.

  • PDF

Polystyrene Beads를 이용한 경량콘크리트의 강도특성에 관한 실험적 연구 (An Experimental Study on Compressive Strength of Lightweight Concrete made of Polystyrene Foam Balls)

  • 이경동;한재익
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제3권2호
    • /
    • pp.155-160
    • /
    • 1999
  • Recently, the study on mix design of lightweight concrete using the polystyrene foam balls is put into practice from the viewpoint to grade up the quality of concrete and recyclable usage of industrial by products. Polystyrene aggregate concrete, PAC, can be used as structural concrete in low strength application. For instance, PAC could be used in the middle part of sandwich panel where stresses are generally low and in the case of grid-type reinforcement where it does not need high bond strength but little compressive strength to resist the pressure of transverse reinforcement. From this point of view, the authors discussed the influence of fluidity and compressive strength of concrete by the difference of the volume percentage of polystyrene foam balls and water cement ratio.

  • PDF

재생 PET 섬유의 형상 및 길이가 시멘트 복합 재료의 소성 수축 균열에 미치는 영향 (Effect of Recycled PET Fiber Geometry and Length on the Plastic Shrinkage Cracking of Cement Based Composites)

  • 원종필;박찬기;김황희;이상우
    • 콘크리트학회논문집
    • /
    • 제19권2호
    • /
    • pp.233-239
    • /
    • 2007
  • 본 연구의 주요 목적은 시멘트 복합 재료의 소성 수축 균열 제어에 폐 PET병으로부터 만들어진 재생 PET 섬유의 효과를 평가하는 것이다. PET은 플라스틱 재료라 알려진 재료로 음료수 병 등에 다양하게 적용되어 왔다. 그렇지만 폐 PET 병은 사용 후에 환경적 측면에서 큰 문제점으로 부각되고 있다. 따라서 폐 PET 병을 재활용하는 방법에 대한 연구는 환경 및 경제적 측면에서 중요하게 되었다. 폐 PET 병을 재활용하는 방법 중 시멘트 복합 재료의 보강 섬유로 사용하는 방법은 효과적인 방법 중에 하나이다. 본 연구에서는 시멘트 복합 재료의 소성 수축 균열에 재생 PET 섬유의 형상 및 길이의 효과를 얇은 슬래브 실험을 통해서 조사하였다. 실험 계획은 섬유의 형상, 길이 및 혼입률의 영향을 이해하기 위하여 수행하였다. 재생 PET섬유의 형상은 straight, crimped및 embossed type의 3가지 형상을 포함하며, 각 3가지 섬유형상 마다 3가지 수준의 섬유 혼입률 및 2가지 종류의 섬유 길이에 대해서 조사하였다. 실험 결과 재생 PET섬유는 시멘트 복합 재료의 소성 수축 균열에 효과적이었다. 섬유의 길이의 관점에서 길이가 긴 섬유는 섬유의 형상이 동일할 때 섬유체적비가 적을 때 효과적이며, 섬유체적비가 증가하면 길이가 짧은 섬유가 더욱더 효과적이었다. 또한 embossed type의 섬유는 적은 섬유 혼입률에서 다른 형상의 섬유보다 소성 수축 균열 제어 효과가 우수하였으며, 높은 섬유 혼입률에서는 straight type의 섬유가 다른 형상의 섬유보다 시멘트 복합 재료의 소성 수축 균열 제어에 가장 효과적이었다.

Influence of fly ash and GGBFS on the pH value of cement mortar in different curing conditions

  • Shafigh, Payam;Yousuf, Sumra;Ibrahim, Zainah;Alsubari, Belal;Asadi, Iman
    • Advances in concrete construction
    • /
    • 제11권5호
    • /
    • pp.419-428
    • /
    • 2021
  • The pH of cement-based materials (CBMs) is an important factor for their durability, sustainability, and long service life. Currently, the use of supplementary cementitious materials (SCMs) is becoming mandatory due to economic, environmental, and sustainable issues. There is a decreasing trend in pH of CBMs due to incorporation of SCMs. The determination of numerical values of pH is very important for various low and high volume SCMs blended cement mortars for the better understanding of different defects and durability issues during their service life. In addition, the effect of cement hydration and pozzolanic reaction of SCMs on the pH should be determined at initial and later ages. In this study, the effect of low and high-volume fly ash (FA) and ground granulated ballast furnace slag (GGBFS) cement mortars in different curing conditions on their pH values has been determined. Thermal gravimetric analysis (TGA) was carried out to support the findings from pH measurements. In addition, thermal conductivity (k-value) and strength activity indices of these cement mortars were discussed. The results showed that pH values of all blended cement mortars were less than ordinary Portland cement (OPC) mortar in all curing conditions used. There was a decreasing tendency in pH of all mortars with passage of time. In addition, the pH of cement mortars was not only dependent on the quantity of Ca(OH)2. The effect of adding SCMs on the pH value of cement mortar should be monitored and measured for both short and long terms.

골재원 및 단위결합재량 변화가 일반강도 콘크리트의 물성에 미치는 영향 (The Influence of That Changes in Aggregate Material and Unit Binder Weight Have on the Material Properties of Regular Strength Concrete)

  • 박용준;김상섭;이명호;조만기;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.17-18
    • /
    • 2015
  • In the case of concrete recently manufactured with a concrete mixing truck, although aggregate and cement are used as the main ingredients, from a costs savings perspective, low quality aggregates are processed and used as concrete aggregate. In the case of these low quality aggregates, the unit volume and unit binder weights are increased for manufacturing, and due to this problems such as dry shrinking of the architecture and economic infeasibility have arisen. Therefore by changing the aggregate material and the unit binder weights that are currently being distributed, this research analyzes the influence on concrete.

  • PDF

골재의 종류에 따른 고강도 콘크리트의 공학적 특성에 관한 기초적 연구 (A Fundamental Study on the Engineering Properties of High Strength Concrete addording to Kinds of Aggregate)

  • 김규용;최희용;김진만;남상일;심옥진;김무한
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.18-23
    • /
    • 1996
  • Since at least three-quarters of the volume of concrete is occupied by aggregate, it is not surprising that its quality is considerable importance. Not only may the aggregate limit the strength of concrete, as weak aggregate cannot porduce strong concrete, but the properties of aggregate greatly affect the durability and sructural performance of concrete. But, it is ture that aggregate strength is usually not a factor in normal concrete strength because the aggregate particle is several times stronger than the matrix and the transition zone in concrete. This study is to consider the influence the strength of concrete according to the kinds of aggregate, such as crushed river rocks, curshed rocks, high strength recycled aggregate, low strength recycled aggregate at water cement ratio 0.25. It is possible to concern the important of the mechanical role of aggegate for the high strength concrete.

  • PDF

혼화재료를 치환한 시멘트 계열 재료에 대한 저점도형 고성능 감수제의 유동 성능 평가 (Fluidity Performance Evaluation of Low Viscosity Typed Superplasticizer for Cement-Based Materials Incorporating Supplementary Cementitious Materials)

  • 손배근;이향선;이유정;한동엽
    • 한국건축시공학회지
    • /
    • 제19권3호
    • /
    • pp.219-228
    • /
    • 2019
  • 본 연구의 목적은 저점도형 고성능 감수제가 혼화재료를 포함하는 시멘트 계열 재료의 유동성 및 레올로지 특성에 미치는 영향을 분석하여 기초적인 정보를 제공하는 것이다. 이에 플라이애시, 고로슬래그, 실리카흄을 치환한 시멘트 페이스트와 모르타르에 대하여 일반적인 고성능 감수제와 저점도형 고성능 감수제를 사용하여 실험을 실시하였다. 실험 결과 저점도형 고성능 감수제는 소성점도에 있어서 일반형 고성능 감수제보다 크게 저감시키는 것으로 나타났다. 이러한 결과를 바탕으로 본 연구가 향후 저점도형 고성능 감수제를 사용하는 데에 기초적인 데이터를 제공할 것으로 기대한다.