• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1036-1037
• /
• 2017

This study investigated the aging reactions of three kinds of igniters(BKNO3, THPP, ZPP). The life-time of igniter depends on oxygen and moisture in the air. For example, Magnesium contained in the $BKNO_3$ reacts with oxygen and water to form oxide and hydrate. This reaction has an adverse effect on ignition reaction and could be information to analyze aging. Thermodynamic calculation could interpret the aging reaction by calculating flame temperature applying several variables(initial temperature, composition, etc.). If combustion is not completed because of aging igniters, flame temperature will be formed at a low range. The result of this research is expected to support the analysis of igniters aging reactions.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.2
• /
• pp.29-34
• /
• 1986

The sulfuric acid sulfonation of 2-aminonaphthalene was preformed at $30^{\circ}C{\sim}200^{\circ}C$ for $1{\sim}15$ hours, using $4{\sim}10$ parts of 90% sulfuric acid${\sim}$20% oleum. This reaction was influenced by many factory such as reaction temperature, reaction time, strength of sulfuric acid and amount of sulfuric acid and among these factors, the effect of the reaction temperature was considerable. The main products of this reaction were Dahl's acid (2-aminonaphthalene-5-sulfonic acid, Broenner's-acid (2-aminonaphthalene-6-sulfonic acid), amnio-F-acid(2-aminonapthalene-7-sulfonic acid), and Baden acid (2-aminonaphthalene-7-sulfonic acid) and another isomers such as Tobia's acid (2-aminonaphthalene-1-sulfonic acid) and 2-aminonaphthalene-4-sulfonic acid were not formed. Of these isomeric acids, those containing the sulfonic acid group in an ${\alpha}-position$, namely, Dahl's acid and Baden acid, are simultaneously formed by sulfonation at low-temperature ($30{\sim}100^{\circ}C$), whilst those containing the sulfonic acid group in a ${\beta}$-position, namely, Broenner's acid and amino-F-acid, are formed simultaneously by sulfonation at high temperatures($150^{\circ}{\sim}200^{\circ}$).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.286-287
• /
• 2006

Barium titanate ($BaTiO_3$) glycolate particles were synthesized at temperature as low as $100^{\circ}C$ through glycothermal reaction by using $Ba(OH)_2{\cdot}8H_2O$ and amorphous titanium hydrous gel as precursors and ethylene glycol as solvent. The particle size and morphology of $BaTiO_3$ glycolate powders can be controlled by varying the reaction conditions such as the reaction temperature and Ba:Ti molar ratio of starting precursors. After glycothermal treatment at $220^{\circ}C$ for 24 h in 1.25:1(Ba:Ti), the average particle size of the $BaTiO_3$ glycolate powder was about 200-400 nm and low agglomeration. $BaTiO_3$ powders were formed by heat-treating the glycolate powder in air at $500-1000^{\circ}C$. As a result, the size of $BaTiO_3$ crystallites changed from around 50-300 nm. It is also demonstrated that the size and shape of $BaTiO_3$ particles investigated as a function of calcination temperature. The $BaTiO_3$ particles obtained from optimum synthesis condition were pressed, sintered and measured for the dielectric property. The $BaTiO_3$ ceramics sintered at $1250^{\circ}C$ for 2 h had 98 % of theoretical density. The ceramics have an average grain size of about $1\;{\mu}m$ and displays the high dielectric constant (~3100) and low dielectric loss (<0.1) at room temperature.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.62-70
• /
• 2021

The problem with intermetallics coating using the heat of molten casting is that the heat generated during combustion synthesis dissolves the coating and the substrate metal. This study investigates whether pre-annealing before synthesis can control the reaction heat, with the aim of Ni₃Al coating on the casting surface. Therefore, the effects of the annealing temperature and time on the combustion synthesis behavior of the powder compact of Ni-25at%Al after annealing were investigated. As results, the reaction heat when synthesized decreased as the annealing temperature was high and the annealing time was longer. This was attributed to the fact that Al was diffused to Ni particles during low temperature annealing and intermediate Ni-Al compounds were formed during high temperature annealing. After combustion synthesis, however, it was found that their microstructures were almost identical except for the amount of intermediate intermetallics. Furthermore, an annealing temperature above 450℃, at which intermediate compounds begin to form, is needed to prevent the dissolving problem during synthesizing. The intermetallics synthesized after annealing at higher temperature and prolonger annealing time showed a good wear resistance. This might be because much intermediate intermetallics of high hardness were remained in the microstructure.

• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.141-147
• /
• 2010

An Ni-Al intermetallic coating has been produced by induction heating on mild steel. The effect of the induction heating conditions on the microstructure of the coating has been investigated. The reaction synthesis of the intermetallic compounds was promoted while increasing the heating rate and the holding time at reaction temperature. Especially, an NiAl phase corresponding to the initial composition of mixed powder was predominantly formed. However, the synthesis at low reaction temperatures occurred by solid state diffusion during the holding time and an Fe-Al reaction layer was formed at the interface with the substrate, regardless of the heating rate. The combustion synthesis of the intermetallic compound occurred at a temperature higher than 1023 K and resulted in an almost single phase NiAl structure.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.2
• /
• pp.195-200
• /
• 1997

The purposes of this study were to investigate the Maillard reactions of some oligosaccharides with lysine and the antioxidative effects of the ethanol extracts from their reaction mixtures on the soybean oil. The Maillard reactions were carried out of 2% oligosaccharides such as palatinose (PN), fructooligosaccharide (FO), isomaltooligosaccharide (IMO) with 2% lysine (L) for 24 hours heating at 60, 80, $100^{\circ}C$. The color intensity of Maillard reaction mixtures were determined by UV-VIS spectrophotometer upon reaction time and temperature. And the antioxidative effects on the soybean oil of each ethanol extract from Maillard reaction mixture of each oligosaccharide were measured by peroxide value (POV). POV's of soybean oil including reaction extracts were determined regularly every 2 days during 20 days storaged at $60{\pm}1^{\circ}C$. The results were obtained as follows: 1. The color intensity of the Maillard reaction mixtures were raised highly as the browning temperature and time increased. The color intensity of PN L browning mixture was the highest. The order of high color intensity at $100^{\circ}C$ was PN L>FO L>Glu L>IMO L. 2. Comparing the antioxidative effect of Maillard reaction product (at $100^{\circ}C$, for 12 hours) of each oligosaccharide to that of BHT and TBHQ, the order of high antioxidative effect was TBHQ>IMO L>BHT>Glu L>PN L>FO L. 3. From these results, it was known that PN L shown as high brown color intensity was appeared low antioxidative effect, while IMO L shown as low brown color intensity was appeared high antioxidative effect. So, it was recognized that there was no relation between brown color intensity and antioxidative effect.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.982-990
• /
• 1999

YSZ/LSM composite cathode was fabricated by dip-coating of YSZ sol on the internal pore surface of a LSM cathode followed by sintering at low temperature (800-100$0^{\circ}C$) The YSZ coating significantly increased the TPB(Triple Phase Boundary) where the gas the electrode and the electrolyte were in contact with each other. Sinter the formation of resistive materials such as La2Zr2O7 or SrZrO3 was prevented due to the low processing temperature and TPB was increased due to the YSZ film coating the electrode resistance (Rel) was reduced about 100 times compared to non-modified cathode. From the analysis of a.c impedance it was shown that microstructural change of the cathode caused by YSZ film coating affected the oxygen reduction reaction. In the case of non-modified cathode the RDS (rate determining step) was electrode reactions rather than mass transfer or the oxygen gas diffusion in the experimental conditions employed in this study ($600^{\circ}C$-100$0^{\circ}C$ and 0,01-1 atm of Po2) for the YSZ film coated cathode however the RDS involved the oxygen diffusion through micropores of YSZ film at high temperature of 950-100$0^{\circ}C$ and low oxygen partial pressure of 0.01-0.03 atm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.95-101
• /
• 2007

The synthesis of NaA zeolite membrane on a porous alumina support from clear solution by using hydrothermal reaction was investigated. Effects of reaction temperature, reaction time and seeding for transformation of zeolite A membrane and powder which are produced in the reactor were monitored through X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). The transformation process of producing Zeolite A membrane starts from the formation of the compact and continuous membrane on the surface of porous support from clear solution. The large Zeolite A poly-crystal was then farmed through the dissolution process. Finally, the process was advanced from sodalite to amorphous. In case of powder, sodalite is formed in the early stage of reaction because of surrounding space difference between membrane and powder crystal. Discrete surrounding space of powder crystal makes easy to transform to sodalite. From Zeolite A to amorphous through transformed product was rapidly advanced at high temperature while the membrane with somewhat low coverage was obtained at low temperature. A compact and continuous zeolite A membrane was synthesized at $120^{\circ}C$ in 12-hour period.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.23-32
• /
• 1998

Al2O3/Al composites were produced by immersing the sintered silica preform in molten aluminum which contained magnesium as impurity. Three distinct regions existed in the penetration behavior of molten me-tal with changing the reaction temperature. These regions are denoted as low temperature regime(75$0^{\circ}C$-85$0^{\circ}C$) intermediate regime(90$0^{\circ}C$-95$0^{\circ}C$) and high temperature regime(100$0^{\circ}C$$\leq$) In the low temperature regime the penetration speed of molten aluminum increased with increasing reaction temperature whereas it decreased in the intermediate regime due to the phase transition of alumina formed by displacement reac-tion. In the high temperature regime the penetration speed of molten aluminum was the highest at 100$0^{\circ}C$ which was 3.6 mm/hr But above 105$0^{\circ}C$ molten aluminum did not penetrate into the silica preform because of the formation of a dense spinel layer at the preform surface by magnesium in molten Al.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.53-58
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it requires a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis considering the exothermic reaction. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.