• 전기학회논문지
• /
• 제65권8호
• /
• pp.1369-1375
• /
• 2016

A rapid progress of the next-generation non-volatile memory device has been made in recent years. Metal/insulator/Metal multi-layer structure resistive RAM(ReRAM) has attracted a great deal of attention because it has advantages of simple fabrication, low cost, low power consumption, and low operating voltage. This paper describes the working principle of the ReRAM device, a review of fabrication techniques, and characteristics of flexible ReRAM devices using graphene oxide as an insulating layer and ReRAM devices using multi-layered insulator. The switching characteristics of the above ReRAM devices have been compared. The oxidized graphene could be employed as an insulator of next generation ReRAM devices.

• 한국초전도저온공학회지:초전도와저온공학
• /
• 제5권1호
• /
• pp.10-17
• /
• 2003

For limitation and interruption of short circuit currents from low voltage to extra high voltage applications, the electrical equipment including fuses and circuit breakers, are widely used today. But in order to anticipate increasing needs for effective and competitive device for limiting the growing fault current in electrical power systems, fault current limitation technologies and fault current limitation devices are widely introduced and investigated in these days. Furthermore, the applications of high temperature superconducting materials (HTSC) into the current limiting devices are new approach for developing of novel and effective col-rent limitation electrical equipment. In this research, the necessities of current limitation technology and the developed and developing current limitation devices for power systems are introduced. Finally, the investigation of resistive type fault current limiters which is under development by LG and KEPCO were introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.290-293
• /
• 2002

For small capacity rectifier circuits such as these for consumer electronics and appliances, capacitor input type rectifier circuits are generally used. Consequently, various harmonics generated within the power system become a serious problem. Various studies of this effect have been presented previously. However, most of these employ switching devices, such as FETs and the like. The absence of switching devices makes systems more tolerant to over-load, and brings low radio noise benefits. We propose a power factor connection scheme using a LC resonant in commercial frequency without switching devices. In this method, It makes a sinusoidal wave by widening conduction period using the current resonance in commercial frequency, Hence, the harmonic characteristics can be significantly improved, where the lower order harmonics, such as the fifth and seventh orders are much reduced. The result are confirmed by the theoretical and experimental implementations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1235-1237
• /
• 2003

For small capacity rectifier circuits as these for consumer electronics and appli capacitor input type rectifier circuits are gen used. Consequently. various harmonics gen within the power system become a serious pro Various studies of this effect have been pres previously. However. most of these employ swit devices, such as FETs and the like. The absen switching devices makes systems more toleran over -load, and brings low radio noise benefits propose a power factor correction scheme using resonant in commercial frequency without swit devices. In this method. It makes a sinusoidal by widening conduction period using the cu resonance in commercial frequency. Hence, harmonic characteristics can be significantly imp where the lower order harmonics. such as the and seventh orders are much reduced. The resu confirmed by the theoretical and experm implementations.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.403-406
• /
• 2003

For small capacity rectifier circuits such as these for consumer electronics and appliances, capacitor input type rectifier circuits are generally used. Consequently, various harmonics generated within the power system become a serious problem. Various studies of this effect have been presented previously. However, most of these employ switching devices, such as FET and the like. The absence of switching devices mattes systems more tolerant to over-load and brings low radio noise benefits. We propose a power factor correction scheme using a LC resonant in commercial frequency without switching devices. In this method It makes a sinusoidal wave by widening conduction period using the current resonance in commercial frequency, Hence, the harmonic characteristics can be significantly improved, where the lower order harmonics, such as the fifth and seventh orders are much reduced The result are confirmed by the theoretical and experimental implementations.

• 한국전자파학회논문지
• /
• 제17권6호
• /
• pp.574-586
• /
• 2006

최근 세계 무선 통신 환경은 선진국가별로 다양한 통신 기술에 대한 기준 마련 및 표준화가 진행되고 있다. 이에 따른 통신 환경 변화에 대처하기 위하여 국내에서도 여러 분야에 걸쳐 다양하게 기술 기준 및 표준화에 대한 연구가 진행되고 있다. 본 연구에서는 미약 무선국의 전계 강도(기술 기준)에 대한 현재 각국의 동향과 그 기준치를 연구 분석하고, 파악함과 동시에, 또한, 전자파 적합 등록에서 제시하고 있는 각국의 전계 강도 기준치와 연계하여 이에 적합한 국내의 비허가 무선 기기(미약 무선 기기)의 실질적인 도입 가능한 전계 강도의 기준치를 제시함을 목적으로 한다. 여기에서 제시한 전계 강도 허용치를 바탕으로, 미약 무선 기기의 보급과 발전에 기여할 것으로 예상되며 국내 통신 시장은 물론 국제 통신 시장에서 경쟁력을 갖출 수 있을 것으로 예상된다.

• 한국컴퓨터정보학회논문지
• /
• 제16권1호
• /
• pp.89-99
• /
• 2011

본 논문에서는 WBAN 환경에서의 저전력 사용과 신뢰성 있는 전송을위한 라우팅 알고리즘을 제안한다. 제안하는 알고리즘은 의료 서비스와 비의료 서비스가 공존하는 WBAN 환경에서 의료용 장치의 에너지 소모를 최대한 줄이고 수명 및 안정성을 최대한 높이는 방법이다. 또한 의료용 장치 뿐 만 아니라 비의료용 장치도 에너지 소모를 최소화하고, 장치의 수명도 최대화 할 수있다. 경로 선택 시 이전 노드와의 거리와 잔존 에너지량을 고려하여 가중치를 계산하고 가중치의 값을 합하여 전체 경로의 가중치를 계산한다. 전체 경로의 가중치가 가장 작은 것을 경로로 설정한다. 또한 이 알고리즘은 노드간의 링크 상태를 파악해서 링크 에러 및 혼잡 상황이 발생 했을 때 에러 경로를 회피하여 다음 가중치의 경로를 선택할 수 있다. 본 논문에서는 무선 센서 네트워크 라우팅 알고리즘인 홉 카운트 기반 최단 거리 라우팅 알고리즘과 EAR 라우팅 알고리즘을 비교 대상으로 하여 WBAN의 특성인 저전력과 높은 신뢰성 보장을 시뮬레이션을 통해 확인한다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1879-1888
• /
• 2018

With power level of grid-connected converters rising, the switching frequency of the switching devices is commonly greatly reduced to improve its power capacity. However, this results in serious couplings of the dq current components, which leads to degradation of the static and dynamic performances of grid-connected converters and fluctuations of the reactive power in dynamic processes. In this paper, complex vector models under low switching frequency are established for an L/LCL grid-connected converter, and the relationship between the switching frequency and the coupling degree is analyzed. In addition, a series decoupling current control strategy is put forward. It is shown that the proposed control strategy can eliminate the couplings, improve the performances and have good robustness to parameter variations through static and dynamic characteristics analyses and a sensitivity analysis. Experimental and simulation results also verify the correctness of the theoretical analyses and the superiority of the proposed control strategy.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.215-222
• /
• 2022

Artificial neuromorphic devices are considered the key component in realizing energy-efficient and brain-inspired computing systems. For the artificial neuromorphic devices, various material candidates and device architectures have been reported, including two-dimensional materials, metal-oxide semiconductors, organic semiconductors, and halide perovskite materials. In addition to conventional electrical neuromorphic devices, optoelectronic neuromorphic devices, which operate under a light stimulus, have received significant interest due to their potential advantages such as low power consumption, parallel processing, and high bandwidth. This article reviews the recent progress in optoelectronic neuromorphic devices using various active materials such as two-dimensional materials, metal-oxide semiconductors, organic semiconductors, and halide perovskites

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.274-277
• /
• 2012

In this paper, we proposes the design of laundry system for low power and smart management. The low power system configures the network with the RF communication module that turn on/off periodically, power consumption less than operating the module all the time without it toggles. The smart management is RFID Laundry Management System (LMS), in order to provide high services, low operation costs and better monitoring. The proposed system consists of RFID tag, wireless RFID hanger and MFC software. To compare with other existing RFID system, our system was developed as a web application. Therefore, customer can check their cloth status through web page or smartphone devices. RFID reader was designed on hanger to make our system enables reliable running effectively. Some results on the performance of an implementation are presented.