• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.148-155
• /
• 2005

In this study, Development of 300,000kcal/hr high velocity Injection burner with fuel multi-stage was performed using experiments. The characteristics of NOx emission in multi fuel/air staged combustor have been experimentally studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is largest access air combustion and the secondary flame is complete combustion zone, where most of fuel bums. Experiments were performed on an industrial scale in a laboratory furnace and Liquefied Natural Gas(LNG) was used as primary and secondary fuels. Comparison of outlet NOx and outlet Temperature under various air rate and primary/ secondary fuel ratio was performed. The test demonstrated that NOx emission con be reduced by 70% in accordance with operating conditions.

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.158-163
• /
• 2009

It is difficult for a burner to achieve an increase in combustibility and a reduction of NOx emission, simultaneously. The reason is because thermal NOx could be reduced at low temperature, while the combustibility should be decreased. To solve this problem, an externally oscillated staging burner was developed, and experiment was conducted according to effective parameters. The combustibility could be improved through the accelerated transfer of heat, mass and momentum obtained by external oscillation. Also, NO is reduced by the decrease of residence time of burning gas in the local highest-temperature spot, which is decreased by the external oscillation and fuel staging. Experiments on variables were conducted to determine the reference flame, and the flame generating the lowest NO concentration was selected. The conditions of reference flame were oscillation frequency 250 Hz, sound pressure 1 VPP, and air ratio 1.1, and NO and CO concentrations were 1ppm and 20 ppm, respectively.

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.251-257
• /
• 2012

본 연구에서는 이중원추형 버너가 장착된 고압연소기를 이용하여 입구공기온도, 공기비 그리고 연소실 압력조건에 따른 NOx 배출 특성을 실험적으로 조사하였다. 배기가스 온도와 NOx 배출량은 동일한 연소실 끝단지점에서 측정되었다. NOx 배출량은 공기비가 증가함에 따라 감소하는 경향을 나타내었으며, 입구공기 온도와 연소실의 압력이 높아질수록 증가하는 경향을 나타내었다. 특히 입구공기 온도의 증가는 희박 영역에서 가연한계를 증가시켜 높은 단열화염 온도를 가짐에도 불고하고 저감된 NOx 배출 수준을 얻을 수 있었다. 연소실 압력이 증가할수록 Thermal NOx의 영향을 받는 영역에서의 NOx 배출은 큰 폭의 상승을 보였으나, 공기비가 1.8이상인 영역에서는 적은 연료량으로 인하여 적은 상승폭을 나타내었다.

• 에너지공학
• /
• 제13권2호
• /
• pp.144-151
• /
• 2004

희박 예혼합 연소방식을 채용한 150MW급 대형 저 NOx 가스터빈 연소기에서 발생하는 급격한 연소진동 발생을 저감하였다. 희박 예혼합 연소기에서는 연소튜닝이 적절히 이루어지지 많은 경우에 연소불안정에 기인한 높은 연소진동의 발생과 함께 NOx 배출량이 높아질 가능성이 있다. 대상 가스터빈의 연소 모드 전환 중에 발생하는 연소진동의 주파수와 크기는 각각 80Hz및 4-9psi로 나타났으며, 대기온도가 낮아짐에 따라 연소진동의 크기가 증가하는 경향을 보였다. 연소진동에 영향을 미치는 인자로서 버너노즐로 공급되는 연료유량을 균등화하기 위한 연소튜닝과 연소모드 전환시 연료라인에 연료를 미리 공급(prefilling)하는 것이 화염안정에 매우 큰 효과가 있었다. 그 결과 연소모드 전환 중에 발생하는 연소진동을 2.5psi까지 저감할 수 있었으며, 150 MW기저부하 운전 중에 NOx 발생량을 35-43ppm(15% $O_2$)으로 유지할 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.19-25
• /
• 2006

Energy efficient and low pollution combustion systems the use gaseous fuels have been in great demand in recent year. Radiant burner in many different forms are emerging as very desirable combustion systems for same reason. Porous radiant burners are used in drying, preheating and curing, and in other type of materials processing and manufacturing processes. However, little knowledge is available about the operating characteristics and the structure of flames in porous ceramic fiber radiant burners. The objective of the present work is to investigate the global performance characteristics of the ceramic fiber burner. A detailed study which includes the spectral intensity, gas temperature, radiation efficiency and global pollutant emissions. Another objective is to study the flame structure of the ceramic fiber burner by measuring the local gas temperature. The results indicate that ceramic fiber burner do offer a 19-44% gain in radiant efficiency. The ceramic fiber burner exhibit significant spectral intensity peaks in the band at $2.0-2.5{\mu}m$. The local temperature distribution inside the mat and near the mat surface as a function of the equivalence ratio can be reasonably interpreted by the relation of the heat balance in the mat and movement of the reaction zone. Nox emission from ceramic fiber burner is less than 25ppm throughout the operating range.

• 한국연소학회지
• /
• 제12권4호
• /
• pp.14-21
• /
• 2007

In order to enhance combustion efficiency, oxygen-enriched combustion is used by increasing the oxygen ratio in the oxidizer. However, since the flame temperature increases, NOx formation in the furnace seriously increases for low oxygen enrichment ratio. In this case, reburning is a useful technology for reducing nitric oxide. In this research, experimental studies have been conducted to evaluate the hybrid effects of reburning/selective non-catalytic reaction (SNCR) and reburning/air staging on NOx formation and also to examine heat transfer characteristics in various oxygen-enriched LPG flames. Experiments were performed in flames stabilized by a co-flow swirl burner, which were mounted at the bottom of the furnace. Tests were conducted using LPG gas as main fuel and also as reburn fuel. The paper reported data on flue gas emissions, temperature distribution in furnace and various heat fluxes at the wall for a wide range of experimental conditions. Overall temperature in the furnace, heat fluxes to the wall and NOx generation were observed to increase by low level oxygen-enriched combustion, but due to its hybrid effects of reburning, SNCR and Air staging, NOx concentration in the exhaust have decreased considerably.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.997-1004
• /
• 2001

Burner of Flat Flame type expects the uniform flame distribution and NOx reduction. The characteristics of Flat Flame Burner become different according to swirl number in the burner throat. Experiments were focused on swirl effect by four types of swirler with different swirl numbers (0, 0.26, 0.6 and 1.24). It shows many different flow patterns according to swirl number using PIV(Particle Image Velocimetry) method. The flow of burner with swirler is recirculated by pressure difference between its center and outside. Recirculated air makes stable in flame, and reduced pollutant gas. In case of swirl number 0, main flow passes through axial direction. As swirl number increased, The backward flow develops in the center part of burner and Flow gas recirculates. This is caused by radial flow momentum becomes larger than axial flow by swirled air and the pressure at center drops against surrounding. As swirl number increases, the radial and axial velocity was confirmed to be larger than low swirl numbers. And turbulence intensity have similar pattern. The CTRZ(Central Toroidal Recirculation Zone) is shown evidently when y/D=1 and S=1.24. The boundary-layer between main flow and recirculated flow is shown that the width is seen to be decreased as swirl number increased.

• 한국연소학회지
• /
• 제13권4호
• /
• pp.37-46
• /
• 2008

Performance test of 5MW class gasturbine combustor was carried out at combustor test facility of KARI(Korea Aerospace Research Institute). The combustor is dry low NOx type premixed combustor and fuel is natural gas. The characteristics of combustor were measured including emission, pressure pulsation and exit temperature distribution. Optimum operation point of combustor was found by changing parameters like fuel ratio between pilot and main burner. The test result showed that the combustor performance is sufficient to satisfy the gasturbine system requirement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.339-345
• /
• 2002

When a flow passes a series of parallel ones, vortexes will be formed in the wake after the cylinder. This paper treats the problems of vibration and noise in tube bank of gas flow duct of heat exchanger thermal suppling boiler in combine cycle thermal power plants. The boiler burner type has recently been changed to low Nox burner and begun commercial operation. After more load up operation then 70%, high level noise and vibration were generated at gas flow duct of heat exchanger.

• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.249-256
• /
• 2017

예혼합연소의 경우 연소시스템의 크기가 작고, 낮은 CO 및 NOx 배출 등의 많은 장점을 가지고 있어 고효율 저공해 가정용 응축보일러에 많이 적용되고 있다. 본 연구에서는 Metal Fiber와 Throttle Body를 적용하여 예혼합 연소시스템을 구성하여 연소특성을 분석하였다. 실험결과 Metal Fiber, Throttle Body 및 Baffle Plate의 조합을 통하여 열용량 6,250-25,000 kcal/h 조건에서 매우 안정적인 청염을 형성하였다. 배기가스의 경우 질소산화물은 당량비 0.724에서 0.795 조건에서 11 ppm 이하로 배출되었고 일산화탄소의 경우 동일 당량비 조건에서 50 ppm 이하로 배출되었다. 가정용 응축보일러의 중요 지표인 열효율의 경우 당량비 0.750 조건에서 96.3% 이상으로 측정되어 고효율 저공해 예혼합 연소시스템의 가능성을 확인하였다.