• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.46-48
• /
• 2009

We demonstrated that the simple layered red phosphorescent organic light-emitting diodes are possible to have high efficiency and low driving voltage without hole injection and transport layers. The simplified OLED shows the max. current efficiency, power efficiency and quantum efficiency of 26.3 cd/A, 20.7 lm/W and 16.7 %, respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.2
• /
• pp.55-60
• /
• 2006

In order to suppress lasing oscillation and obtain high light power, We have proposed a novel SLD which is formed with a straight and tilted waveguide. The window region is used to suppress lasing oscillation and reduce the facet reflectivity. High power and low reflectivity is obtained by the straight and tilted waveguide. Based on the theoretical analysis, we have fabricated the SLD with the waveguide of 500 $\mu$m length and window region of 50 $\mu$m by LPE equipment. Through the measurements of optical characteristics, the output light power of 3 mW was obtained at the 150 mA CW injection current and 25$^{circ}C$. We have confirmed that the proposed SLD has a 0.8 dB spectrum ripple lower than 1 dB which is sufficiently low reflectivity for preventing lasing.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.3
• /
• pp.101-105
• /
• 2004

The efficient power MOSFET inverter applied for a simple and low cost power supply is proposed for driving the dielectric barrier discharge (DBD) lamp load. For decades, the DBD phenomenon has been used for ozone gas production in industry. In this research, the ultraviolet and visible light sources utilizing the DBD lamp is considered as the load for solid-state high frequency power supply. It is found that the simple voltage-source single-ended quasi-resonant ZVS inverter with only one active power switch could effectively drive this load with the output power up to 700 W. The pulse density modulation based control scheme for the single-ended quasi-resonant ZVS inverter using a low voltage and high current power MOSFET switching device is proposed to provide a linear power regulation characteristic in the wide range 0-100％ of the full power as compared with the conventional control based Royer type parallel resonant inverter type power supplies.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.1
• /
• pp.38-41
• /
• 2002

We have investigated current-voltage-luminance characteristics of organic light-emitting diodes based on TPD/Alq$_3$organics depending on the application of forward-backward bias voltage. Luminance-voltage characteristics and luminous efficiency were measured at the same time when the current-voltage characteristics were measured. We have observed that the current-voltage characteristics shows a reversible current maxima at low voltage, which is possibly not related to the emission from Alq$_3$. Current-voltage-luminance characteristics imply that the conduction luminance mechanism at low voltage is different from that of high voltage one.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.26-33
• /
• 2002

This study was undertaken to obtain the fundamental knowledges on the weld deflects and it's realtime monitoring method. The paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurements during $CO_2$ laser welding of STS 304 stainless steel and A5083 aluminum alloy in different welding condition. The characteristic frequencies of plasma and keyhole fluctuations at different welding speed and shield gases were measured and compared with the results of Fourier analyses of temporal AE and LE spectra, and they had considerably good agreement with keyhole and plasma fluctuation. Namely, the low frequency peaks of AE and LE shifted to higher frequency range with the welding speed increase, and leer the argon shield gas it was higher than that in helium and nitrogen gases. The low frequencies dominating in fluctuation spectra of LE probably reflect keyhole opening instability. It is possible to monitor the weld bead deflects by analyzing the acoustic and/or plasma light emission signals.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.151-156
• /
• 2003

This study was performed to investigate the effect of light quality on evapotranspiration and graft-taking characteristics of watermelon grafted seedlings using blue, red and far-red light-emitting diodes (LED). At initial stage of graft-taking, blue light increased the evapotranspiration rate (EVTR) of grafted seedlings as compared to effects of red and far-red on EVTR of grafted seedlings. Grafted seedlings graft-taken under red and blue LED showed the high graft-taking of 100% and 96%, respectively. However, grafted seedlings graft-taken under far-red LED showed the graft-taking of 80% and survival of 60% with low seedlings quality after hardening. The stem of grafted seedlings graft-taken under red light was elongated but blue light suppressed the stem elongation. The leaf area of grafted seedlings graft-taken under red light was increased. It is concluded that the effect of light quality using LED on graft-taking of watermelon grafted seedlings was significantly recognized. Considering the duration of quality of grafted seedlings graft-taken under artificial lighting, LED could be used as an effective lighting sources to validate the continuance of seedling quality.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.27-30
• /
• 2007

Recently, use of light-weight panel is increasing in building. Styrofoam sandwich panel is inexpensive and it is excellent in insulation ability and constructability. But styrofoam of panel inside is low ignition point. Consequently, when panel is fired, it is occur in poisonous gas. On the other hand, light-weight foamed concrete is excellent in insulation ability, fire resistance due to inner pore. Properties of light-weight concrete is influenced by foaming agent type. Accordingly, this study investigate in insulation property of according to foaming agent type in order to using light-weight foamed concrete instead of styrofoam. As a results, Non-heating zone temperature of light-weight foamed concrete of using AP, FP are lower than light-weight foamed concrete of using AES. Light-weight foamed concrete of using AES, FP are satisfied with fire performance of two hours at foam ratio 50, 100. Light-weight foamed concrete of using AP is satisfied with fire performance of two hours at AP ratio 0.1, 0.15. Insulation property is better closed pore by made AP, FP than open pore by made AES.

• The Korean Journal of Ecology
• /
• v.28 no.2
• /
• pp.105-112
• /
• 2005

Environmental factors such as light and low $CO_2$ concentrations trigger events which may result in stomatal opening. Stomatal aperature is largely controlled by the solute contents of guard cells, but not exclusively, by through changes in their content of potassium salts, with $K^+$ balanced either by $Cl^-$ or malate, depending on the species and conditions. However, how these signals are sensed and how they are transduced into driving the ion fluxes that control stomatal movements is not still fully understood. The basic role of stomata is regulating transpiration and photosynthesis. Photosynthesis plays a central role in the physiology of plants and an understanding of its response to light is, therefore, critical to any discussion of how plants sense and respond to light. It had been proposed that the evidences pointed three possible mechanisms for the light response. Firstly, there is a direct response of stomata to light. Secondly. there is an indirect response of stomata to light through the effect of $CO_2$. Lastly, there are some evidences for a third effect of light on stomata. However, attempts to investigate how these three possible mechanisms explained in detail in response to light have not been made. Therefore, this study is examined the differences among these three possible mechanisms.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.228-233
• /
• 2010

We studied the optical characteristics correlated with low dielectric constants of low-k SiOCH thin films through ellipsometry. The low-k SiOCH thin films were prepared by CCP-PECVD method using BTMSM(Bis-trimethylsilylmethane) precursors deposited on p-Si wafer. The Si-O-CHx, Si-O-Si, Si-CHx, CHx and Si-H bonding groups were specified by FTIR spectroscopic spectra, and the groups coupled with the nano-porous structural organic/inorganic hybrid-type of SiOCH thin films which has extremely low dielectric constant close to 2.0. The structural groups includes highly dense pore as well as ions in SiOCH thin films affecting to complex refraction characteristics of single layer on the p-Si wafer. The structural complexity originate the complex refractive constants of the films, and resulted the elliptical polarization of the incident linearly polarized light source of Xe-light source in the range from 190 nm to 2100 nm. Phase difference and amplitude ratio between s wave and p wave propagating through SiOCH thin film was studied. After annealing, the amplitude of p wave was reduced more than s wave, and phase difference between p and s wave was also reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.240-240
• /
• 2009

We developed the low level laser therapy(LLLT) apparatus for external injury cure using a GaAsP Diode. This equipment was fabricated by using GaAsP diode and a microcontroller, and designed to enable us to control light irradiation timer, and frequency. In this paper, the designed device was used to find out how GaAsP diode light source affects the skin wound of RAT. In the experiment, $1cm^2$ wounds on the External injury of RAT were made. Light irradiation RAT and none light irradiation RAT divided, each RAT was irradiated 20 min a day for 9 days. In result, compared with none light irradiation RAT, the lower incidence of inflammation and faster recovery was shown in light irradiation RAT.