• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1123-1128
• /
• 2016

Recently BLE beacon has been widely used as a method for measuring the indoor location in the IoT Technique. But it requires a filtering technique for the measurement of the correct position. It is used the most fixed beacon. It is not accurate that calculates the position information through the identification of the beacon signal. Therefore, filtering is important. So it takes a lot of time, position measurement and filtering. Thus, we is to measure the exact position at the indoor using a mobile beacon. The measured beacon signal is composed of an ontology for reuse in the same pattern. RSSI is measured the receiver is the distance of the beacon. And this value configure the location ontology to be normalized by the relationship analysis between the values. The ontology is a method for calculating the position information of the moving beacon. It can detect fast and accurate indoor position information and provide the service.

• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.82-88
• /
• 2017

Emergency lights and exit signs are an indispensable part of safety precautions for effective evacuation in case of emergency in public buildings. These emergency sign indicates safe escape routes and emergency doors, using an internationally recognizable sign. However visibility of those signs drops drastically in case of emergency situations like fire smoke, etc. and loss of visibility causes serious problems for safety evacuation. This paper propose a novel emergency light and exit sign built-in with Bluetooth Low Energy (BLE) Beacon to assist the emergency self-guiding evacuation using devices for crisis and emergency management to avoid panic condition inside the buildings. In this approach, the emergency light and exit sign with the BLE beacons deployed in the indoor environments and the smart devices detect their indoor positions, direction to move, and next exit sign position from beacon messages and interact with map server in the Internet / Intranet over the available LTE and/or Wi-Fi network connectivity. The map server generate an optimal emergency exit path according to the nearest emergency exit based on a novel graph generation method for less route computation for each smart device. All emergency exit path data interfaces among three system components, the emergency exit signs, map server, and smart devices, have been defined for modular implementation of our emergency evacuation system. The proposed exit sign experimental system has been deployed and evaluated in real-time building environment thoroughly and gives a good evidence that the modular design of the proposed exit sign system and a novel approach to compute emergency exit path route based on the BLE beacon message, map server, and smart devices is competitive and viable.

• Journal of Biomedical Engineering Research
• /
• v.37 no.3
• /
• pp.112-118
• /
• 2016

The neck pain is fairly common occurance. Forward head posture and text neck are poor postures which may be related with neck pain but the evidence is not enough. We developed the wearable sensor which can assess the head & neck posture in daily life. Microprocessor, Bluetooth low energy, and 3-axis accelerometer, rechargeable battery and vibratior for reminding are used to implement the wearable sensor. Real-time algorithm to parameterize the posture for one epoch is implemented which classifies the posture in the epoch into three classed; dynamic, static_good posture, and static_poor posture. Also the algorithm makes reminding to its wearer to give them the prolonged poor posture is detected. The mean error of measurement was 1.2 degree. The correlation coefficient between neck angle and craniovertebral angle was 0.9 or higher in all cases. With the pilot study on text neck syndrome was also quatified. Average of neck angle were 74.3 degree during the listening in the classroom and 57.8 degree during the smartphoning. Using the wearable sensor suggested, the poor postures of forward head posture and neck neck can be detected in real-time which can remind the wearer according to his/her setting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1941-1948
• /
• 2016

The incident during commuting to school happened frequently in these days, such that the government announced the student commuting safety policy for addressing to implement the safety management system of the unsafer school commuting zone. In this paper, a commuting tracking system is proposed that notifies the location of vehicles and the boarding status of student using BLE beacon and smart phone GPS function. The commuting tracking system that gets the data from the system server of driver's smart phone GPS location and UUID of the beacon which had provided students has configured to provide notifications to parents and related administrators. It provides real-time information about whether a student boarding, boarding times and bus locations for parents and administrators. It verifies the disembarking time for each student and also provides to driver to secure if any student tries to board the wrong school bus and if any students is left behind in the bus.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.326-327
• /
• 2016

A study on Ontology-based indoor positioning techniques using BLE Beacon. Recently BLE beacon has been widely used as a technique for measuring the indoor location. But it requires a filtering technique for the measurement of the correct position, and uses the most fixed beacon. It is not accurate that calculates the position information through the identification of the beacon signal. Therefore, filtering is important. So it takes a lot of time, position measurement and filtering. Thus, we is to measure the exact position at the indoor using a mobile beacon. The measured beacon signal is composed of an ontology for reuse in the same pattern. RSSI is measured the receiver is the distance of the beacon. And this value configure the location ontology to be normalized by the relationship analysis between the values. The ontology is a method for calculating the position information of the moving beacon. It may be detected fast and accurate indoor position information.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1211-1221
• /
• 2016

In IoT environment, making sure of trust of IoT devices is the most important one than others. The security threats of nowadays almost stay at exposure or tampering of information. However, if human life is strongly connected to the Internet by IoT devices, the security threats will probably target human directly. In case of devices, authentication is verified using the device-known private key. However, if attacker can modify the device physically, knowing the private key cannot be the evidence of trust any more. Thus, we need stronger verification method like code attestation. In this paper, we use software-based code attestation for efficiency. We also suggest secure code attestation method against copy of original code and implement it on embedded device and analyze its performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1551-1558
• /
• 2021

Beacon signals used in indoor positioning system are reflected and distorted, resulting in noise signals. KF(Kalman Filter) has been widely used to remove this noise. In order to apply the KF, optimization process considering the signal type, signal strength, and environmental elements of each product is required. In this paper, we propose a solution to the optimization problem of KF Parameters using GA(Genetic Algorithm) in BLE(Bluetooth Low Energy) Beacon-based indoor positioning system. After optimizing KF Parameters by applying the proposed technique with a certain distance between Beacon and receiver, we compared the estimated distance passed through KF with the unfiltered distance. The proposed technique is expected to reduce the time required and improve accuracy of KF Parameters optimization in an indoor positioning system based on RSSI (Received Signal Strength Indication).

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.5
• /
• pp.1-8
• /
• 2023

In this paper, we implement a control system for an IoT-based backpack type vacuum cleaner using a smart device such as a smart phone or smart watch. The implementation system consists of control module produces, control module programming, and smart device programming. The control module is made of Arduino Nano, HM-10 BLE(Bluetooth Low Energy) module and relays as basic parts. The smart device exchanges signals with the control module via bi-directional BLE communication, which allows it to control the start/stop of the vacuum cleaner. Backpack type vacuum cleaners are effective for cleaning high places that require the use of ladders. However, it is often necessary to take off the backpack type cleaner to start/stop it. The IoT-based vacuum cleaner control system implemented in this paper fundamentally solves the problem by allowing users to control the start/stop of the vacuum cleaner without taking it off.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.135-155
• /
• 2024

Urban public health monitoring in smart cities focuses on the control of conditions and health challenges in urban environments. Considering the rapid spread of diseases and pandemics, it is important for health authorities to trace people carrying the virus. In smart cities, this tracing must be interoperable and intelligent, especially in indoor surfaces characterized by small distances between people. Therefore, to fight pandemics, it is necessary to start with the already-existing digital equipment of the Internet of Things, such as connected objects and smartphones. In this study, the developed system is employed to provide a social IoT network and suggest a strategy which allows reliable traceability without threatening the privacy of users. This IoT-based system allows respecting the social distance between persons sharing public services in smart cities without applying smartphone applications or severe confinement. It also permits a return to normal life in case of viral pandemic and ensures the much-desired balance between economy and health. The present study analyses previous proposed social distance systems then, unlike these studies, suggests an intelligent and distributed IoT based strategy for positioning students. Two scenarios of static and dynamic optimization-based placement of Bluetooth Low Energy devices are proposed and an experimental study shows the contribution and complementarity of the introduced contact tracing strategy with the applications on smartphones.

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.51-60
• /
• 2020

This study aimed to develop a modular smart clothing system for heart rate monitoring that reduces the inconvenience caused by battery charging and the large size of measurement devices. The heart rate monitoring system was modularized into a temporary device and a continuous device to enable heart rate monitoring depending on the requirement. The temporary device with near-field communication (NFC) and heart rate sensors was developed as a clothing attachment type that enables heart rate monitoring via smart phone tagging when required. The continuous device is based on Bluetooth Low Energy (BLE) communication and batteries and was developed to enable continuous heart rate measurement via a direct connection to the temporary device. Furthermore, the temporary device was configured to connect with a textile electrode made of a silver-based knitted fabric designed to be located below the pectoralis major muscle for heart rate measurement. Considering the user-experience factors, key functions, and the ease of use, we developed an application to automatically log through smart phone tagging to improve usability. To evaluate the accuracy of the heart rate measurement, we recorded the heart rate of 10 healthy male subjects with a modular smart clothing system and compared the results with the heart rate values measured by the Polar RS800. Consequently, the average heart rate value measured by the temporary system was 85.37, while that measured by the reference device was 87.03, corresponding to an accuracy of 96.73%. No significant difference was found in comparison with the reference device (T value = -1.892, p = .091). Similarly, the average heart rate measured by the continuous system was 86.00, while that measured by the reference device was 86.97, corresponding to an accuracy of 97.16%. No significant difference was found in terms of the heart rate value between the two signals (T value = 1.089, p = .304). The significance of this study is to develop and validate a modular clothing system that can measure heart rates according to the purpose of the user. The developed modular smart clothing system for heart rate monitoring enables dual product planning by reducing the price increase due to unnecessary functions.