• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7B
• /
• pp.620-627
• /
• 2003

Ethernet passive optical networks (EPONs) are an emerging access network technology that provide a low-cost method of deploying optical access lines between a carrier's central office and customer sites. Dynamic bandwidth allocation (DBA) provides statistical multiplexing between the optical network units for efficient upstream channel utilization. To support dynamic bandwidth distribution, 1 propose an cyclic polling-based DBA algorithm for differentiated classes of service in EPONs. And, I show that an interleaved polling scheme severely decreases downstream channel capacity for user traffics when the upstream network load is low. To obtain realistic simulation results, I used synthetic traffic that exhibits the properties of self-similarity and long-range dependence I then analyzed the network performance under various loads, specifically focusing on packet delays for different classes of traffic.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.135-145
• /
• 2006

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.137-143
• /
• 2018

Korea's air passenger traffic has been growing steadily. In this paper, we propose a forecasting model of air passenger demand to ascertain the growth trend of air passenger transportation performance in Korea. We conducted a simulation based on System Dynamics with the demand as a dependent variable, and international oil prices, GDP and exchange rates as exogenous variables. The accuracy of the model was verified using MAPE and $R^2$, and the proposed prediction model was verified as an accurate prediction model. As a result of the demand forecast, it is predicted that the air passenger demand in Korea will continue to grow, and the share of low cost carriers will increase sharply. The addition of the Korean transportation performance of foreign carriers in Korea and the transportation performance of Korean passengers due to the alliance of airlines will provide a more accurate forecast of passenger demand.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.259-264
• /
• 2020

This study classified the hairstyle types of flight attendants in flight on A airline, the largest low-cost carrier in Asia. The cabin crew does not maintain a constant commute time, but the hairstyle will change with the diversification of commute time according to flight schedules. Therefore, in the case of a female cabin attendant, if there is a lot of time before going to work, a hairstyle such as a up hair style may be maintained. However, when you have less time to trim your hair, keep your daily hairstyle, such as one-length cuts and gradation cut, or keep your hair ponytail-like. The cabin crew maintains a variety of hairstyles, but the color of the hair prefers natural brown or slightly lighter dyeing, and the lighter hair due to excessive bleach is not preferred.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.247-259
• /
• 2017

This study analyzed the network of low cost carriers (LCCs) to investigate the structural characteristics of airport networks. 71 LCCs in Asian major airports from January 2010 to January 2016 were queried from the SRS Analyzer Schedule Database of IATA's Airport Intelligence Service, and analyzed international routes excluding domestic flights. We analyzed the network connection mechanism focusing on Incheon International Airport, Hong Kong, Singapore, Narita, Kansai, Pudong, Kaohsiung, Gimpo and Jeju airports as well as structural changes in the LCC network using four centrality analysis concepts. The outcomes showed that the LCC network is formed in these airports and the density of connectivity to other airports increased. In recent years, LCC has launched LCCs-Alliances and would be considered to operate a hub-and-spoke network.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2014

For mobile application, semiconductor packages are increasingly moving toward high density, miniaturization, lighter and multi-functions. Typical wafer level packages (WLP) is fan-in design, it can not meet high I/O requirement. The fan-out wafer level packages (FOWLPs) with reconfiguration technology have recently emerged as a new WLP technology. In FOWLP, warpage is one of the most critical issues since the thickness of FOWLP is thinner than traditional IC package and warpage of WLP is much larger than the die level package. Warpage affects the throughput and yield of the next manufacturing process as well as wafer handling and fabrication processability. In this study, we investigated the characteristics of warpage and main parameters which affect the warpage deformation of FOWLP using the finite element numerical simulation. In order to minimize the warpage, the characteristics of warpage for various epoxy mold compounds (EMCs) and carrier materials are investigated, and DOE optimization is also performed. In particular, warpage after EMC molding and after carrier detachment process were analyzed respectively. The simulation results indicate that the most influential factor on warpage is CTE of EMC after molding process. EMC material of low CTE and high Tg (glass transition temperature) will reduce the warpage. For carrier material, Alloy42 shows the lowest warpage. Therefore, considering the cost, oxidation and thermal conductivity, Alloy42 or SUS304 is recommend for a carrier material.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.151-157
• /
• 2004

Because of the excellent thermal and chemical properties of mullite and cordierite as the stable oxide ceramic materials, they were widely used from engineering materials to electronic materials. Notwithstanding of their high demands, mullite was synthesised because it is not existed in nature. It is also difficult to produce cordierite of fine powder with high purity due to the narrow range of synthetic temperature. Mullite was synthesised by solid state reaction. However, synthesized mullite has been inhomogeneous. Because of the facts, various synthetic methods have been studied so far including sol-gel method. The purpose of this study is to synthesis mullite and cordierite of fine powder with high purity at the lower temperature by solution-polymerization route using PVA as a polymer carrier, which is an economical method by using low cost materials. As a result, mullite and cordierite were produced with mono crystal phase at 1200$^{\circ}C$ and 1250$^{\circ}C$, respectively, and their surface area over 20 ㎡/g.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.30-36
• /
• 2009

Various types of ultra-wideband components with 10's of GHz bandwidth have been developed utilizing a uniplanar ultra-wideband balun, which is a simple microstrip-to-coplanar stripline (CPS) transition structure with the operating frequency range from near DC to over 40 GHz. Developed ultra-wideband components include antennas, mixers, doublers, and detectors in a carrier type and in a surface mountable type. One of surface mountable components, for example, single balanced doubler has output frequency 8 ~ 28 GHz. These high-Performance, low-cost ultra-wideband components may replace expensive conventional components, and also can be used to develop new multi-GHz OWE application areas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.737-743
• /
• 2011

In this paper, we designed and implemented a Monopole+IFA(Inverted F Antenna) hybrid antenna using the coupled feeding structure for the all band mobile phone. Studied antenna has wide band characteristics by the simultaneous operation both monopole and IFA under the coupled feeding structure. An antenna has designed PCB embedded type without antenna carrier component for the low in cost. Implemented antenna has within 2.5:1 for VSWR under LTE/CDMA/GSM900/DCS/USPCS/WCDMA/WiBro/WiFi in all band for the mobile services Measured average gains and efficiencies were -3.98~-0.09 dBi and 40.03~97.99 % for the LTE, CDMA, GSM900 band, and -3.90~-1.01 dBi and 40.70~79.31 % for the DCS, USPCS, WCDMA, WiBro, WiFi band. It's shown that studied antenna can be applied to all band mobile phone antenna including LTE.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.676-684
• /
• 2008

In digital video broadcasting-terrestrial (DVB-T), which is the European digital terrestrial television standard, the orthogonal frequency division multiplexing (OFDM) has been adopted for signal transmission. The main reasons using OFDM are to increase the robustness against the frequency selective fading and impulse noise, and to use available bandwidth efficiently. However, channel variation within an OFDM symbol destroys orthogonality between subcarriers, resulting in inter-carrier interference (ICI), which increases an error floor in proportional to maximum Doppler spread. This paper provides an ICI analysis in both time and frequency domains while existing literatures analyze the ICI effects mainly in frequency domain and proposes the algorithms that estimate the channel impulse response and channel variation using least square (LS) algorithm which is the most simple channel estimation technique. And we propose adaptive channel estimation algorithm that estimates the velocity of terminals. The simulation results show that proposed algorithm has similar performance with about 1.5% computational complexity of noise and ICI reduction LS algorithm in low speed environments.