• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1237-1242
• /
• 2018

Photodynamic therapy has been suggested as an alternative treatment to current cancer therapy which resulting in a variety of side effects because photodynamic therapy targets specific cancer cells and does not have a significant effect on normal cells. Typically, laser was used as a photodynamic therapy, but this was limited due to high cost and heat reaction. However, compact light emitting diodes that can emit light of various wavelengths have been developed at a low cost, which has a great influence on the low cost development of photodynamic therapy equipment. On the other hand, in the study of photodynamic therapy, the data on the direct effect of visible light are relatively small. Therefore, in this paper, we propose a novel cancer therapeutic module by developing a cancer cell proliferation inhibition module based on an Arduino that is relatively inexpensive, and able to use light of various wavelengths.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2019

Currently, LPWA(Low Power Wide Area) communication technology is widely used due to the development of IoT(Internet of Things) technology. Among the LPWA technologies, LoRaWAN(Long Range Wide Area Network) is widely used in many fields due to its wide coverage, stable communication speed, and low-cost modem module prices. In particular, LoRa(Long Range) can easily construct LoRaWAN with a dedicated gateway. So many organizations are building their own LoRaWAN-based networks. The LoRaWAN Gateway receives the LoRa packet transmitted from an End-device installed in the adjacent location, converts it into the Internet protocol, and sends the packet to the final destination server. Current LoRa Gateway uses a single-hop method, and each gateway must include a communication network capable of the Internet. If it is the mobile communication(i.e., WCDMA, LTE, etc.) network, it is required to pay the internet usage fee which is installed in each gateway. If the LoRa communication is frequent, the user has to spend a lot of money. We propose an idea on how to design a multi-hop protocol which enables packet routing between gateways by analyzing the LoRaWAN communication method implemented in its existing single-hop way in this paper. For this purpose, this paper provides an analysis of the standard specification of LoRaWAN and explains what was considered when such protocol was designed. In this paper, two gateways have been placed based on the functional role so as to make the multi-hop protocol realized: (i) hopping gateway which receives packets from the end-device and forwards them to another gateway; and (ii) main gateway which finally transmits packets forwarded from the hopping gateway to the server via internet. Moreover, taking into account that LoRaWAN is wireless mobile communication, a level-based routing method is also included. If the protocol proposed by this paper is applied to the LoRaWAN network, the monthly internet fee incurred for the gateway will be reduced and the reliability of data transmission will be increased.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.7
• /
• pp.369-375
• /
• 1999

This paper presents the novel low-performance single-phase voltage regulator which has common arm between the AC/DC and DC/AC power converters and adopts appropriate switching strategy, resulting in the reduction of the number of switching devices. Moreover, by introducing the method to replace the method to replace the conventional AC condenser in filter circuit with the new low-cost type using two DC condenser, the whole voltage regulator system can be more compact, simpler and less expensive than conventional ones. The fully digital controller is designed using high speed DSP, and the proposed system is validated through the experimental results.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.285-305
• /
• 1992

The purpose of this study was to describe the current status of dual-earner families in Seoul. The specific aims of this study were to examine the dynamics of marital relationship, parent-child relationship and old mother-daughter/daughter in law relationship in the same family. The sample consised of 265 dual-earner families was selected based on wives' jobs, primarily non-professional. The information was gathered from working couples and their school-aged children. The findings of this study were as follows: 1. Sex role attitude of husbands was more traditional than their wives. Therefore, housework sharing of husbands was very low and wives' perception of inequity was high. Wives' marital satisfaction was affected by the wives' perception of inequity, joint leisure activity, sexual satisfaction, and wives' job satisfaction. Husbands' marital satisfaction was affected by sexual satisfaction, perceived difficulties and problems of the husbands caused by wives' employment, and the degree of their housework participation. 2. The emotional uneasiness of children during mothers' absence was reported. The communication about mothers' job was helpful to gain children's understanding toward mothers' job. Mothers suffered from guilty feeling of neglecting their children in spite of their good performance of mothering role. 3. The employed daughters/daughters in law perceived high rewards and low cost in relationships with their mothers/mothers in law. The perceived quality of daughter-mother relationship was higher with low cost and high rewards than that of daughter in law/mother in law. Finally practical and policy implications were suggested.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.284-294
• /
• 2008

In this paper, we describe an implementation of small mobile robot that can be used at research and application of mobile sensor networking. This robot that will constitute the sensor network, as a platform of multi-robot system for each to be used as sensor node, has to satisfy restrictions in many aspects in order to perform sensing, communication protocol, and application algorithms. First, the platform must be designed with a robust structure and low power consumption since its maintenance after deployment is difficult. Second, it must have flexibility and modularity to be used effectively in any structure so that it can be used in various applications. Third, it must support the technique of wireless network for ubiquitous computing environment. At last, to let many nodes be scattered, it must be cost-effective and small. Considering the above restrictions of the mobile platform for sensor network, we designed and implemented robots control the current of actuator by using additional circuit for power efficiency. And we chose MSP430 as MCU, CC2420 as RF transceiver, and etc, that have the strength in the aspect of power. For flexibility and modularity, the platform has expansion ports. The results of experiments are described to show that this robot can act as sensor node by RF communication process with Zigbee standard protocol, execute the navigation process with simple obstacle avoidance and the moving action with RSSI(Received Signal Strength Indicator), operate at low-power, and be made with approx. $100.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.999-1008
• /
• 2012

Unlike the existing CMOS chip, ISB (Intelligent Silicon Bead) is new concept biochip equipped with optical communication and memory function. It uses the light for power of SoC CMOS and interface with external devices therefore it is possible to miniaturize a chip size and lower the cost. This paper introduces an input protocol and a design of the low power and the low area to transfer the power and the signal through a single optical signal applied from external reader device to bead chip at the same time. It is also verified through simulation and measurement. In addition, low-power PROM is designed for recording and storing ID of a chip and it is successful in obtaining the value of output according to the optical input. Through this study, a new type biochip development can be expected by solving high cost and a limit of miniaturizing a chip area problem of an existing RFID.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.677-685
• /
• 2017

Supply rate is very low because conventional smart system of streetlight management requires a lot of time and cost until now. In this paper, we demonstrated maintaining system for streetlight which uses LoRaWAN to solve following those reasons. Using LoRaWAN is subject to build long range and low power communication. Furthermore, it helps to make low initial and cost for maintenance. Detecting problem of streetlight in real time and controling streetlight based on situation and environment are additional benefits. This system on control part is carried by administrator in GUI environment. Finally, we verified the proposed system of performance for LoRaWAN communication and sensor accuracy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1632-1639
• /
• 2004

The exist email program between Ship and Land has developed to reduce communication fee because of high satellite communication cost and low speed. Owing to this proper, the exist program has less flexibility and high speed. but to add or change functions is not easy. and it also have many difficulties for programmer to develop marine application because of delicate Satellite Radio communication. In this paper we design new protocol which consist of packet to give flexiblity and implement windows service program for programer to make marine applications easily like monitoring data, DB for Ship Management System, Planned Maintenance System.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.93-102
• /
• 2017

Wireless MEMS sensors have common features such as wireless communication, data measurement, embedded processing, battery-based self-power, and low cost, and increased measurement effectiveness. Wireless MEMS sensors enable efficient SHM without interfering with location because there is no requirement for triboelectric noise and cumbersome cables. However, there is little research on the communication distance with sensors and data. For instance, existing researches have limited communication distance experiments in civil engineering bridges. It is also necessary to investigate the characteristics of dynamic behavior and the communication distance of architectural structures with different wireless transmission/reception environments. Therefore, in a building structure with walls and slabs instead of open spaces, MEMS sensors and data loggers were used as distance experiments where communication disturbance between the vertical slab and the horizontal wall could actually be communicated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.129-139
• /
• 1999

DECT(Digital Enhanced Cordless Telecommunications) is the communication protocol and the pico-cellular network that provides a PABX with mobile services on the local area within its cell radius of about 100 to 200m. Compared with GSM, DECT provides low-cost communication services based on the PSTN and it is an ideal supplementary method for the type of in-building mobile communication. In order to implement the data link communication layer of the DECT system, in this paper we analyzed and designed the structures and functions of it that provided reliable communication and real-time services to the upper network layer by performing the functions of link controls, error controls, sequence controls, and flow controls.