• Journal of Information Processing Systems
• /
• v.11 no.3
• /
• pp.342-353
• /
• 2015

It is widely accepted that single carrier frequency division multiple access (SC-FDMA) is an excellent candidate for broadband wireless systems. Channel estimation is one of the key challenges in SC-FDMA, since accurate channel estimation can significantly improve equalization at the receiver and, consequently, enhance the communication performances. In this paper, we study the application of compressive sensing for sparse channel estimation in a SC-FDMA system. By skillfully designing pilots, their patterns, and taking advantages of the sparsity of the channel impulse response, the proposed system realizes channel estimation at a low cost. Simulation results show that it can achieve significantly improved performance in a frequency selective fading sparse channel with fewer pilots.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.766-769
• /
• 2005

In a ubiquitous environment made up of multiple sensors, most sensors participate in communications with limited battery, and the sensor node isn't able to participate in communications when all the battery is used up. When an existing authentication method is used for the sensor node which has to participate in a long term communication with limited battery, it creates a problem by making the length of network maintenance or sensor node's operation time relatively shorte. Therefore, a network structure where RM (Register Manager) node and AM (Authentication Manager) node are imported to solve the energy consumption problem during a communication process is presented in this thesis. This offers a low power protocol based on safety through a mutual authentication during communications. Through registration and authentication manager nodes, each sensor nodes are ensured of safety and the algorithm of key's generation, encryption/descramble and authentication is processed with faster operation speed. So the amount of electricity used up during the communications between sensor nodes has been evaluated. In case of the amount of electrical usage, an average of $34.783\%$ for the same subnet and 36.855 for communications with two different subnets, are reduced. The proposed method is a protocol which maintains the limited battery for a long time to increase the effectiveness of energy usage in sensor nodes and can also increase the participation rate of communication by sensor nodes.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.286-295
• /
• 2015

Avionic databuses fulfill a critical function in the connection and communication of aircraft components and functions such as flight-control, navigation, and monitoring. Ethernet-based avionic databuses have become the mainstream for large aircraft owning to their advantages of full-duplex communication with high bandwidth, low latency, low packet-loss, and low cost. As a new generation aviation network communication standard, avionics full-duplex switched ethernet (AFDX) adopted concepts from the telecom standard, asynchronous transfer mode (ATM). In this technology, the switches are the key devices influencing the overall performance. This paper reviews the avionic databus with emphasis on the switch architecture classifications. Based on a comparison, analysis, and discussion of the different switch architectures, we propose a new avionic switch design based on a time-division switch fabric for high flexibility and scalability. This also merges the design concept of space-partition switch fabric to achieve reliability and predictability. The new switch architecture, called space partitioned shared memory switch (SPSMS), isolates the memory space for each output port. This can reduce the competition for resources and avoid conflicts, decrease the packet forwarding latency through the switch, and reduce the packet loss rate. A simulation of the architecture with optimized network engineering tools (OPNET) confirms the efficiency and significant performance improvement over a classic shared memory switch, in terms of overall packet latency, queuing delay, and queue size.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.139-141
• /
• 1995

In this paper, we proposed digitalized low cost data logger system. In the past, data logger system which use analog method had many problems, inconvenience of measurement, unsatisfied accuracy, and had difficulty in storing data. Proposed system overcome these problems by using one-chip microcontroller which detects abnormal satus and saves it in RAM card. Saved data are transmitted to personal computer by serial communication port and by parallel interface card. Field experiment results validate the performances of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1055-1056
• /
• 2006

This paper presents a remote dimming control method for the electrodeless lamps using 2.4 GHz RF communication. Since the proposed dimming method are implemented with a simplest open loop control using ISM band HF modem and low cost MCUs, and the remote controller has just several functions such as On/Off and duty ratio increasing/decreasing. It can be made with low cost. In this paper, the detailed digital logics of the proposed remote dimming control are described and the experimental results are presented.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.127-140
• /
• 2023

While tools exist for blind people to understand shapes, these are not commercially available nor affordable and often require the assistance of sighted people. Thus, we designed two low-cost grid-based tactile tools using toggle buttons (TogGrid) and cotton balls (CottonGrid). To assess the potential of these as an educational tool, we conducted a user study with 12 people with visual impairments where they were asked to understand and reproduce shapes under different conditions. Although CottonGrid is relatively cheap and easy to make, findings show that TogGrid was perceived to be better in terms of perceived easiness, task completion time, accuracy, and preference in general. Particularly, participants valued TogGrid for enabling them to identify and correct errors. Based on the findings, we provide implications for utilizing toggle buttons for designing educational instruments for learning and expressing shapes for blind people.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.179-187
• /
• 2008

In this paper, we carried out the performance evaluation of depolarized fiber optic gyroscope(D-FOG) that was designed and fabricated with the low-cost optical communication single mode fiber and depolarizer. In order to reduce the phase error of D-FOG, the circuit of stabilized current and temperature of the light source was made and the performance was analyzed. The current and the temperature stability of the fabricated stabilization circuit were less than $200{\mu}A$ and $0.0098^{\circ}C$, respectively. Also, the D-FOG's experimental result showed that the value of the dynamic range of rotated rate, the scale factor error with a good linearity, and the zero bias drift were ${\pm}50^{\circ}/s$, 2.8881%, and $19.49^{\circ}/h$, respectively. The results indicated that a low-cost FOG was able to fabricate which was more cost effective than conventional FOG with a high-cost high-birefringent polarization maintaining fiber.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2024

Smart City, a key application area of the AIoT (Artificial Intelligence of Things), provides various services in safety, security, and healthcare sectors through location tracking and location-based services. an IPS (Indoor Positioning System) is required to implement location-based services, and wireless communication technologies such as WiFi, UWB (Ultra-wideband), and BLE (Bluetooth Low Energy) are being applied. BLE, which enables data transmission and reception with low power consumption, can be applied to various IoT devices such as sensors and beacons at a low cost, making it one of the most suitable wireless communication technologies for indoor positioning. BLE utilizes the RSSI (Received Signal Strength Indicator) to estimate the distance, but due to the influence of multipath fading, which causes variations in signal strength, it results in an error of several meters. In this paper, we conducted research on a path loss model that can be applied to BLE IPS for proximity services, and confirmed that optimizing the free space propagation loss coefficient can reduce the distance error between the Tx and Rx devices.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.4 s.36
• /
• pp.473-484
• /
• 1991

Hospitals have been very susceptable to changes in external environment. Accordingly, they have been experiencing great financial difficulty due to low insurance rates and increasing competition. As a remedy, hospitals have attempted to use computer in a strategic manner. Such system is called strategic information system(SIS), and order communication system(OCS ) is an example of SIS in hospital setting. While OCS has known to be effective in reducing waiting time for outpatients, many hospitals are reluctant to introduce this system mainly because there are no real data or methods for justifying the cost of the system. Cost-benefit analysis has been traditionally used for such purpose, but this method deals with limited portion of benefits and therefore not very useful for analyzing the economic feasibility of SIS. In this paper, information economics tools which expand cost with value was used to analyze the economic feasibility of OCS. To assist the analysis, financial simulation model was developed using simulation package, called IFPS(Interactive Financial Planning System).

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.367-370
• /
• 2002

In this paper, we propose a new node architecture LonWorh control Network for home network system environmint using power line communications. Using conventional Lon Work technology is a many disputable points for home network. LonWork network system needs high-cost development equipment. Moreover, conventional Lon Work system can not implement high-grade algorithms and variety application operation. because of the limitation of processing ability in Neuron chip. For that reason, the proposed structure is applicable to low-cost and more complex applications which are impossible in home network using conventional Lonworks structure. The proposed structure is implemented with some hardware and かone software for power line home network. The physical layer and the MAC layer of the LonTalk protocol within ton Work are implemented in hardware, which decreases the development costs communication processor. The upper of link layer of the LonTalk protocol is implemented with software, which decreases the development costs of software and increases the flexibility of tile system and increases the extension of the system. We verified the commercial feasibility of the proposed system through the power line tests with the existing LonWorks network in home network. As a result, it is concluded that the proposed architecture provides increasing flexibility and decreasing cost of the system.