• 제목/요약/키워드: Low Characteristic Impedance

검색결과 92건 처리시간 0.022초

마이크로스트립 선로에서 Sn-O 박막의 전도노이즈 흡수 특성 (Conduction Noise Absorption by Sn-O Thin Films on Microstrip Lines)

  • 김성수
    • 대한금속재료학회지
    • /
    • 제49권4호
    • /
    • pp.329-333
    • /
    • 2011
  • To develop wide-band noise absorbers with a special design for low-frequency performance, this study proposes a tin oxide (Sn-O) thin films as the noise absorbing materials in a microstrip line. Sn-O thin films were deposited on polyimide film substrates by reactive sputtering of the Sn target under flowing $O_{2}$ gas, exhibiting a wide variation of surface resistance (in the range of $10^{0}-10^{5}{\Omega}$) depending on the oxygen partial pressure during deposition. The microstrip line with characteristic impedance of $50\Omega$ was used for the measurement of noise absorption by the Sn-O films. The reflection parameter $(S_{11})$ increased with a decrease of surface resistance due to an impedance mismatch at the boundary between the film and the microstrip line. Meanwhile, the transmission parameter $(S_{21})$ diminished with a decrease of surface resistance resulting from an Ohmic loss of the Sn-O films. The maximum noise absorption predicted at an optimum surface resistance of the Sn-O films was about $150{\Omega}$. For this film, greater power absorption is predicted in the lower frequency region (about 70% at 1 GHz) than in conventional magnetic sheets of high magnetic loss, indicating that Ohmic loss is the predominant loss parameter for the conduction noise absorption in the low frequency band.

저특성 임피던스의 λ0/4 단락 스터브 기술을 이용한 WLAN 저지 대역을 가지는 UWB BPF (Lower Characteristic Impedance Based Compact f λ0/4 Short-Circuited Stub UWB Bandpass Filter with WLAN Stopband)

  • 동 타이 호아;주효석;김인석
    • 한국전자파학회논문지
    • /
    • 제20권4호
    • /
    • pp.323-332
    • /
    • 2009
  • 본 논문에서는 기존의 $\lambda_0$/4 단락 스터브 대역 통과 필터의 특성을 개선하여 LTCC(Low Temperature Co-fired Ceramic)을 이용하여 UWB(Ultra Wideband) 응용에 적합한 필터 기술을 소개한다. 높은 유전 상수의 기판($\varepsilon_r$ = 40)상에 기존의$\lambda_0$/4의 단락 스터브 대역 통과 필터 기술을 적용하기 위하여 기존의 필터와는 다르게 낮은 특성 임피던스 선로를 이용하여 결과적으로 스터브의 수를 다섯 개에서 두 개로 감소시켰다. 또한, 3개의 단락 결합 선로를 이용해서 5.15 GHz에서 5.825 GHz의 주파수 범위에서 WLAN(Wireless Local Area Network) 저지 대역을 특성 내에 삽입하였다. 본 필터는 통과 대역에서 1 dB 미만의 삽입 손실과 10 dB 이상의 반사 손실을 갖는 것으로 측정되었고, 109.49 %의 대역폭 율이 달성되었다. 측정 결과는 시뮬레이션 결과와 잘 일치한다. 필터의 크기는 $4{\times}8{\times}0.57\;mm^3$이다.

Low-Profile Planar Inverted-F Antenna for Ultrawideband Applications

  • Yun, Junsik;Choi, Jaehoon
    • Journal of electromagnetic engineering and science
    • /
    • 제16권4호
    • /
    • pp.235-240
    • /
    • 2016
  • In this paper, a low-profile planar inverted-F antenna (PIFA) for ultrawideband (UWB) applications is proposed. The antenna consists of a PIFA and a ground plane with a slot. The addition of the slot not only improves the impedance matching of the PIFA but also forms an additional resonance. Therefore, the proposed antenna has a wideband characteristic covering the full UWB frequency range (3.1 GHz to 10.6 GHz) and a stable and nearly omnidirectional radiation pattern. The antenna also has a smaller volume and thickness compared to previous UWB PIFAs.

래치-업 면역과 높은 감내 특성을 가지는 LIGBT 기반 ESD 보호회로에 대한 연구 (Analysis of the LIGBT-based ESD Protection Circuit with Latch-up Immunity and High Robustness)

  • 곽재창
    • 한국전기전자재료학회논문지
    • /
    • 제27권11호
    • /
    • pp.686-689
    • /
    • 2014
  • Electrostatic discharge has been considered as a major reliability problem in the semiconductor industry. ESD reliability is an important issue for these products. Therefore, each I/O (Input/Output) PAD must be designed with a protection circuitry that creates a low impedance discharge path for ESD current. This paper presents a novel Lateral Insulated Gate Bipolar (LIGBT)-based ESD protection circuit with latch-up immunity and high robustness. The proposed circuit is fabricated by using 0.18 um BCD (bipolar-CMOS-DMOS) process. Also, TLP (transmission line pulse) I-V characteristic of proposed circuit is measured. In the result, the proposed ESD protection circuit has latch-up immunity and high robustness. These characteristics permit the proposed circuit to apply to power clamp circuit. Consequently, the proposed LIGBT-based ESD protection circuit with a latch-up immune characteristic can be applied to analog integrated circuits.

풍력발전단지 연계 전용선로 보호용 거리계전 알고리즘 (A Distance Protection Algorithm for a Transmission Line to Interconnect a Wind Farm to a Utility System)

  • 권영진;강상희;최동민;장성일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
    • /
    • pp.516-518
    • /
    • 2005
  • This paper presents a distance protection algorithm a lied to the linked line for interconnecting wind farm with the utility. The capacity of wind farm is lower than utility system and its fault current level is very low. When a high resistance fault occurs in the linked line, it is difficult to detect accurate fault distance because of reactance effect. By using the characteristic of equivalent source impedance of induction generator which is compensated by capacitor bank and characteristic of the capacity of wind farm, this paper proposes improved distance protection algorithm applied to the linked line. A series of PSCAD/EMTDC simulation results have shown effectiveness of the proposed algorithm.

  • PDF

국내 저압 전기기기의 고조파 유출 제한값 산정 (Calculation of the Harmonic Emission Limit for low-Voltage Electrical Equipment)

  • 강문호;송양회;이흥호
    • 조명전기설비학회논문지
    • /
    • 제22권10호
    • /
    • pp.56-61
    • /
    • 2008
  • 배전계통의 고조파 방해(Harmonics Disturbance)현상은 배전계통에서 전압강하와 함께 순시 전력품질을 저해하여 중성선 및 NGR(Neutral Ground Reactor) 과열, OCGR 오동작 등의 문제를 발생시킴으로써 전력회사와 고객 모두에게 막대한 경제적인 손실을 주고 있어 동 분야에 대한 적극적인 대책이 필요하다. 이에 대한 해결 방안으로 유럽에서는 IEC 61000-3-2 규격을 통해 상당 16[A] 이하 저압 전기기기의 고조파를 제한하고 있다. 본 규격은 저압 전기기기를 4개의 등급으로 구분하여 관리하고 있으며, 분석결과 클래스 A등급 해당 전기기기의 고조파 유출제한 기준은 저압계통의 기준임피던스와 허용 최대전압을 바탕으로 산정되었으며, 타 등급(B, C, D등급)의 유출제한 기준들도 클래스 A의 유출제한 기준을 바탕으로 산정되었다. 따라서 본 논문에서는 IEC 61000-3-2 규격 분석결과를 바탕으로 국내 기준임피던스에 기초하여 국내 저압 전기기기의 고조파 유출 제한 값을 산정하였다.

Bioelectrical Impedance Analysis for Prediction of Early Complications after Gastrectomy in Elderly Patients with Gastric Cancer: the Phase Angle Measured Using Bioelectrical Impedance Analysis

  • Yu, Byunghyuk;Park, Ki Bum;Park, Ji Yeon;Lee, Seung Soo;Kwon, Oh Kyoung;Chung, Ho Young
    • Journal of Gastric Cancer
    • /
    • 제19권3호
    • /
    • pp.278-289
    • /
    • 2019
  • Purpose: Phase angle obtained using bioelectrical impedance analysis (BIA) provides a relatively precise assessment of the nutritional status of elderly patients. This study aimed to evaluate the significance of phase angle as a risk factor for complications after gastrectomy in elderly patients. Materials and Methods: We evaluated 210 elderly patients (aged ${\geq}65years$) who had undergone gastrectomy for gastric cancer between August 2016 and August 2017. The phase angle cutoff value was calculated using receiver operating characteristic curve analysis according to sex. A retrospective analysis regarding the correlation between early postoperative complications and well-known risk factors, including the phase angle, was performed. Results: Multivariate analysis revealed that the presence of two or more comorbidities (odds ratio [OR], 3.675) and hypoalbuminemia (OR, 4.059) were independent risk factors for overall complications, and female sex (OR, 2.993) was independent risk factor for severe complications. A low phase angle (OR, 2.901 and 4.348, respectively) and total gastrectomy (OR, 4.718 and 3.473, respectively) were independent risk factors for both overall and severe complications. Conclusions: Our findings show that preoperative low phase angle predicts the risk of overall and severe complications. Our findings suggest that BIA should be performed to assess the risk of postoperative complications in elderly patients with gastric cancer.

전압 고조파에 의한 커패시터 전류 특성 해석 (A Study on the Characteristic of Capacitor Current by Voltage Harmonics)

  • 김종겸;김성헌;김일중
    • 전기학회논문지P
    • /
    • 제58권2호
    • /
    • pp.148-153
    • /
    • 2009
  • As the increasing of non-linear load, we have a growing interest in power quality. Power quality has come to the voltage quality. Voltage harmonics consist in at the PCC by the non-linear load. Capacitor is generally used for the power compensation and as the passive filter by the serial connection with reactor. Capacitor has low impedance as the frequency increases, so easily fall down by the harmonic component of non-linear load. Small voltage of low-order acts on quite a few at the capacitor by the current increase. In this paper, we measured the magnitude and angle of voltage at the PCC and calculated under the same condition. we checked out that lower voltage of higher order produces current magnification.

비대칭 전압 불평형에 의한 커패시터 동작 특성 (A Study on the Characteristic of Capacitor by Asymmetrical Voltage Unbalance)

  • 김종겸;박영진
    • 전기학회논문지P
    • /
    • 제59권1호
    • /
    • pp.18-23
    • /
    • 2010
  • As the increasing of Non-linear load, we have been growing interest for the harmonics. Harmonics has been focused on the current component rather than voltages. Voltage harmonics can be mainly generated at the PCC with non-linear load and act on voltage unbalance. Voltage harmonics can be enlarged at the capacitor with low impedance as frequency increases. Capacitor is basically used for the power-factor compensation and sometimes as the passive filter. Small voltage of low-order acts on quite a few at the capacitor by the current increase. Capacitor has easily fall under by harmonic components. In this paper, we measured the magnitude and phase angle of asymmetrical voltage with harmonics components at the PCC and calculated with the same condition. we concluded that voltage harmonics of higher order increase each current component but have a little effect on capacitor rating.

저 비트율 전력선 모뎀에 대한 저압 댁내망의 채널 특성 시뮬레이션 기법에 관한 연구 (A Simulation Technique for the Characterization of the Low-bit-rate Household AC Power Line Communication Channel)

  • 안남호;정태규
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제51권5호
    • /
    • pp.197-202
    • /
    • 2002
  • In this paper, the characteristics of the household AC power line network is analyzed for the low bit rate powerline communication (PLC) in the frequency range from 10㎑ to 450㎑ The PLC channel transfer characteristics including its characteristic impedance are derived based on the network topology which is constructed with the household power lines loaded with the various types of electric apparatus. Both the distributed circuit analysis and the lumped circuit model based analysis are applied for the characterization of the PLC channel and the results are compared by the computer simulations. The analysis illustrates very well the adverse effects caused by the loading of electric apparatus and as well those casued by the reflection of wavers in the household AC Power line communication network.