• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.6
• /
• pp.1157-1167
• /
• 2013

The development of electronic devices has recently led to many problems such as personal information rape and leakage of business information. Conventional loud-speakers have been generally used to output devices. It can be, however, operated as a micro-phone which was abused as a means for eavesdropping since the speaker and microphone have basically the equivalent structure. Most importantly, the general peoples are not aware of the approaching danger about using speaker as microphone. And, traditional eavesdropping detection equipment does not check the attack. In this paper, we demonstrate that there is a serious danger and vulnerability in using loud-speakers since they can be used as eavesdropping devices.

• Phonetics and Speech Sciences
• /
• v.4 no.4
• /
• pp.139-146
• /
• 2012

This study was designed to examine comfort levels of pitch and loudness with target matching and their effects on electroglottographic (EGG) and acoustic measures. Twelve speakers, six males and six females, were instructed to produce /a/ sustained vowel for three seconds at a comfortable pitch and loudness level without any instruction and with a target matching procedure of either a certain f0 or SPL separately with visual and auditory feedback. The range of pitch for females and males were presented by progressing up and down randomly at intervals of 5Hz from 150 Hz to 310 Hz (total 33 frequency targets) and from 85 Hz to 190 Hz (total 22 frequency targets), respectively. The loudness levels were 65, 75, 85, 95 dB (total of four intensity targets) for both males and females. Subjective estimations of comfortable levels were obtained using a 10-point equal-appearing interval rating scale following each phonation. The results showed that males and females demonstrated similar trends in loudness levels with greatest comfort at 75 dB, whereas pitch comfort ratings showed a greater variability with females having a wider range with target matching. In the comfort levels of individuals, most male and female speakers rated higher comfort at soft, rather than loud phonations. On the other hand, most male speakers perceived highest comfort levels below the comfort pitch levels they phonated under natural conditions. Higher frequency ranges, however, were perceived to be more comfortable than those of natural condition in most female speakers, although the comfortable pitch levels in spontaneous phonations were within the comfort level ranges determined by targeted phonations. When comparing acoustic (%jitter, %shimmer, SNR) and EGG measures (CQ%) between spontaneous comfortable phonations and targeted phonations produced by the same subject at similar f0 and intensity, no significant differences were observed (p>0.05). Thus, target matching procedures may be considered a compatible and alternative method to reduce the variability of comfortable pitch and loudness levels by eliciting consistent comfortable phonations.

• Journal of the Korean Institute of Educational Facilities
• /
• v.10 no.4
• /
• pp.5-20
• /
• 2003

The purpose of the research on the noise of educational facilities is to build up pleasant environments by minimizing the influence on the students in the school. This study provides fundamental data for acoustic design by measuring, computer simulation and analyzing the room acoustic characteristics of the lecture room in middle school. For measurement on the factors of room acoustic, RT of lecture room and noise reductions depending on various walls of different structures were measured and analyzed. The lecture system being installed and carried out on the normal lecture room was divided into 4 types-employment of multimedia machines, employment of multimedia machines and loud speakers, employment of loud speaker, and existing verbal speaking-and SPL for each type was measured and analyzed. Based on the measured characteristics of acoustic characteristics for normal lecture room, the problems for environment of noise were understood through computer simulation, applications for improvements of performance for each facility were studied, schemes for improvements of performance by using the effects were presented, necessary fundamental data were secured, and schemes to enhance flexibility on the existing facilities of school against changing educational courses were secured.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.130-137
• /
• 2019

In this study, the acoustic characteristics of 13 types of emergency broadcasting speakers were tested under the test set-up of UL 2043 and compared. When the sound pressure level of 1 W speakers was compared with speakers with a 15 W output, the SPL of the 15 W speakers was approximately 20 dB higher in some frequency bands. Loudness analysis showed that people can recognize emergency sound from a 15 W speaker twice as loud as the emergency sound from 1 W speakers. The analysis results on the articulation index (room) had an opposite tendency with loudness results, meaning that small speakers can generate clearer sound. Therefore, it is necessary to improve emergency broadcasting speakers to generate louder and clearer sound. Moreover, a performance evaluation standard is needed based on the reasonable and quantitative measurements and evaluations of the acoustic characteristics of the emergency-broadcasting speakers so that a sufficient and clear sound can be generated in various spaces. In addition, it is necessary to establish standards for the clarity of emergency broadcasting in various spaces.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.113-115
• /
• 2003

Recently, many linear motion generators and are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loud speakers tostirling engine driven linear reciprocatings, alternators, compressors, textile machines etc. In this paper the dynamic performance with load is computed by a general purpose method, which the equation of electromagnetic field, the equation of electric circuit and the equation of motion are coupled together. We fumed out the driving system and the dynamic characteristics of current, voltage and displacement is confirmed experiment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.415-418
• /
• 2011

It is critical to assess the characteristics of flame response to pressure perturbations for the understanding of nonlinear combustion instabilities. Previous studies can be grouped into flame response upon perturbed, fresh air and fuel mixture, and flame response directly perturbed from longitudinal waves. The present study presents experimental methodology for the understanding of the flame response exposed to transverse acoustic waves generated by loud speakers.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1048-1050
• /
• 2003

Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic con type loud speakers to stilting engine driven linear reciprocating alternators, compressors, textile machines etc. In this paper, we analyze the characteristics of tubular linear motor with Halbach and radial magnet array respectively. We already derived magnetic field solutions due to the PMs and to the currents and Motor thrust. On the basis of analytical field solutions, this paper deals with flux linkages and back emf. The results are validated extensively by comparison with finite element analyses. Then, this parer also presents thrust characteristics according to design parameters for each model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.251-257
• /
• 2014

An actuator system is a type of motor designed to control a mechanism operated by a source of energy, in the form of an electric current by converting energy into some kind of motion. As audio actuators, transforming electric voltage signal into audio signal, speakers and amplifiers are commonly used. In applications of industry, high output power systems are required. For these systems to generate high-quality output, it is essential to control output impedance of audio systems. We have developed an adaptable power supply for driving active amplifier systems with variable loads. Depending on the changing values of resistance of the speaker which produces audible sound by transforming electric voltage signal, the power supply source of the active amplifier can generate the maximum power delivered to the speaker by an adaptable change of loads. The amplifier is well protected from the abrupt increment of peak current and an excess of current flow.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.857-861
• /
• 2004

An active method that improves low frequency characteristics of a reverberation chamber has been proposed. Spatial uniformity of sound pressure at low frequency has been increased by applying active noise control system. The system acts as frequency selective damping materials, which decreases resonance at low frequency and leave high frequency sound field as it is. Linearity of the chamber, which is essential for sound power measurement in the chamber, is guaranteed since fixed control logic has been adopted. Simple application and tests have been done in a small sized rectangular reverberation chamber which has 400Hz cutoff, Loud speakers were used to simulate a noise source and to construct an active noise control system. The spatial distribution of a sound field at 250Hz, 315Hz and 400Hz bands has been measured before and after control. The standard deviation of sound field has been decreased from 3.4dB to 2.5dB. The results show the possibility of active control system as a sound diffuser.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.287-301
• /
• 2022

The present study aims to investigate the difference of soundscape evaluation results from on-site field test and laboratory test which are commonly used for soundscape surveys. In order to do this, both field and lab tests were carried out at four different areas in Cheongju city. On-site questionnaire surveys were undertaken to 65 people at 13 points. Laboratory listening tests were carried out to 48 adults using recorded sounds and video. Laboratory tests were undertaken to two different groups who had experience of field survey or not. Also, two different sound reproduction tools, headphones and speakers, were used in laboratory tests. As a result, it was found that there is a very close correlation between sound loudness and annoyance in both field and laboratory tests. However, it was concluded that there must be a difference in recognizing the figure sounds between field and laboratory tests since it is hard to apprehend on-site situation only using visual and aural information provided in laboratory tests. In laboratory tests, it was shown that there is a some difference in perceived most loud figure sounds in two groups using headphones and speakers. Also, it was analyzed that there is a tendency that field experienced people recognize the figure sounds using their experienced memory while non-experienced people can not perceive the figure sounds.