• Safety and Health at Work
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2015

Time-loss injuries are still a major occurrence in Canada, injuring thousands of Canadian workers each year. With obesity rates on the rise across the country, as well as around the world, it is important that the possible effects of obesity in the workplace be fully understood, especially those effects linked to lost-time injuries. The aim of this paper was to evaluate predictors of workplace lost-time injuries and how they may be related to obesity or high body mass index by examining factors associated with lost-time injuries in the health care sector, a well-studied industry with the highest number of reported time loss injuries in Canada. A literature review focusing on lost-time injuries in Registered Nurses (RNs) was conducted using the keywords and terms: lost time injury, workers' compensation, occupational injury, workplace injury, injury, injuries, work, workplace, occupational, nurse, registered nurse, RN, health care, predictors, risk factors, risk, risks, cause, causes, obese, obesity, and body mass index. Data on predictors or factors associated with lost-time injuries in RNs were gathered and organized using Loisel's Work Disability Prevention Management Model and extrapolated upon using existing literature surrounding obesity in the Canadian workplace.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.94-102
• /
• 2001

The thermodynamic second law analysis, which means available energy or exergy analysis, for the indicated performance of Otto cycle engine has been carried out. Each operating process of the engine is simplified and modeled into the thermodynamic cycle. The calculation of the lost work and exergy through each process has been done with the thermodynamic relations and experimental data. The experimental data were measured from the test of single cylinder Otto cycle engine which operated at 2500 rpm, WOT(Wide Open Throttle) and MBT(Minimum advanced spark timing for Best Torque) condition with different fuels: gasoline, methanol and mixture of butane-methanol called M90. Experimental data such as cylinder pressure, air and fuel flow rate, exhaust gas temperature, inlet gas temperature and etc. were used for the analysis. The proposed model and procedure of the analysis are verified through the comparison of the work done in the study with experimental results. The calculated results show that the greatest lost work is generated during combustion process. And the lost work during expansion, exhaust, compression and induction process follows in order.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.2
• /
• pp.113-120
• /
• 2017

PURPOSE: The purpose of this study was to investigate the effect of a physical therapy-based tailored exercise program on pain, accident incidence rates, the number of work days lost, and economical loss cost for workers in an automobile parts manufacturing company. METHODS: A total of 530 workers with musculoskeletal symptoms were given a physical therapy-based tailored exercise program twice a week, for one hour a day. This exercise program consisted of movement pattern correction, muscle stretching and strengthening, and postural correction exercises, according to principles of movement impairment syndromes and medical training therapy. From 2011 to 2016, the lost days of work, accident incidence rates, and loss cost were examined. The pain measured by VAS (visual analogue scale) and the number of workers participating in the exercise program from 2014 to 2016 were also measured. The single subjects A-B design was applied and analyzed. RESULTS: After applying the exercise program, pain decreased and the number of workers participating in the program increased. Accident incidence rates, number of work days lost, and economical loss cost decreased. There was a significant correlation between the number of workers who received exercise therapy by year and accident incidence rates, lost days of work, and economical loss cost (p<.05). CONCLUSION: It is necessary to expand the physical therapy-based tailored exercise program to prevent musculoskeletal disorders because it has a positive effect on both workers and employers.

• Journal of English Language & Literature
• /
• v.58 no.4
• /
• pp.783-807
• /
• 2012

This study compares and contrasts Freud's "work of mourning" which mostly appears in his memorable essay "Mourning and Melancholia" and Derrida's theory of mourning which appears in various works such as MEMOIRES for Paul de Man, The Work of Mourning, and others. Freud maintains that the mourner begins to sever emotional ties to the lost object through a labor of memory and eventually completes the work of mourning. It is a "testing of reality" that motivates the mourner to begin to relinquish emotional attachment to the lost object. Derrida, however, challenges Freudian work of mourning by saying that true mourning lies in "respecting the Otherness of the Other." Derrida suggests that Freud's "normal work of mourning" is "unjust betrayal" of the lost object because it "kills" and "devours" the other and thereby makes it part of the self. So he proposes that work of mourning has "to fail in order to succeed": "success fails" and "failure succeeds." There is an enormous, even epistemological, chasm between Freud who states that mourning, "however painful it may be, comes to a spontaneous end" and Derrida who states that "mourning is interminable. Inconsolable. Irreconcilable." and "I mourn Therefore I am." The former is the voice of "testing of reality" and common sense whereas the latter is that of utopian ethical vision. Yet neither seems to get the upper hand and they are kind of forced to maintain an ongoing dialogue with each other, for true mourning seems to lie somewhere in between.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.118-127
• /
• 2022

This study analyzes the characteristics of occupational accidents of food delivery via motorcycle in terms of accident probability and work-days. Depending on their employment status, food-delivery workers were divided into "employed" workers (who work for restaurants) and "special-type" workers (who work for delivery platforms). Collected data include occupational accident-information during the last two years (1,468 cases for employed workers and 4,899 cases for special-type workers) and their risk information such as age, work experience, accident location, season of the accident, and weather conditions. The study finds that special-type workers had a significantly higher accident probability for the younger age group (80.8%), while employed workers had more accidents in both 20's or younger (34.9%) and 50's or older (25.4%). The number of work-days-lost was higher for special-type workers with less work experience, and it decreased with increasing work experience. Moreover, the chance for accidents was higher at night time (55%) than for day time (45%) for special-type workers as well as for employed workers. The number of work-days-lost was higher in foreign workers (180.79 days) than in Korean workers (121.44 days). Accident probability (30.7%) and work-days-lost (136.2 days) was higher in winter than in other seasons. In addition, accidents-per-day was higher on snowy days (12.7 cases per day) than rainy (8.1) and windy days (7.1). In addition, it was found that deadly accidents mainly caused injuries to face, head, and chest, while non-deadly accidents affected mainly the legs and feet. This study enables the development of better policies to prevent accidents of food delivery workers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.346-351
• /
• 2018

Objective: This study aims to provide information needed to determine the wages paid for replacement labor for work lost following accidents in agricultural operations. Methods: Visits and interviews were conducted with 171 farmers who experienced a loss of at least one day of work due to an agricultural workplace accident. Results: It was found that only 35.1% of the study participants hired replacement labor, and more replacement labor was hired in greenhouse and fruit workplaces than in open field work. The mean number of days of hiring replacement labor was 14.6 days, and no significant differences were found between the national average wage and the surveyed value, while female workers were paid less than their male counterparts. Conclusions: The results from this study would be of help in determining a reasonable level of compensation for lost work.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.4
• /
• pp.427-438
• /
• 1996

The suitability of female cattle ($Brahman{\times}Holstein$) and buffaloes (Murrah / Jafarabadi) for work on a sugarcane crusher was tested. The animals were fed chopped sugarcane tops and elephant grass supplemented with rice bran and urea-molasses blocks. In experiment 1, six cattle and six buffaloes, (with three animals seven to eight months pregnant at the start of the experiment in each group), worked individually, alternate weeks for 90 minutes a day for 6 d/week. Within the 90 min, cattle did more work than buffaloes (p < 0.05), and non-pregnant animals did more than pregnant animals, but cattle crushed significantly (p < 0.05) more cane per day than buffaloes. During work animals lost weight, but gained the weight back during resting weeks, when fodder intakes were higher. There were no significant differences in live weight change and fodder intakes between pregnant and non-pregnant animals during the six weeks. In experiment 2, four pairs of lactating cows and buffaloes crushed sugarcane for 3 h/d, 6 d/week for three weeks. Work done was higher in cattle than buffaloes, but cane crushed was marginally lower. All animals lost weight during work, particularly in the first week, but gained weight during the week after work. Daily milk yield was lower during the working weeks ($-0.55{\pm}0.15kg$) than in the week before work. Butter fat yield showed no significant change. One buffalo showed ovarian activity and oestrus behaviour during the work. Two cows showed ovarian activity within one month after the work. It was concluded that pregnant and lactating cows and buffaloes can effectively operate a cane crusher, however a temporary reduction in milk yield can be expected in the working period, and ovarian activity may be suppressed.

• Physical Therapy Korea
• /
• v.17 no.4
• /
• pp.61-68
• /
• 2010

The purpose of this study was to investigate the effects of a workplace-based work-conditioning program (WCP) on the management of work-related musculoskeletal disorders (WRMDs) in an automobile-parts manufacturing company. In total, 1,110 subjects with WRMDs participated in workplace-based WCP emphasizing function-centered management and ergonomics. We investigated the incidence of WRMDs variables (number of persons diagnosed with industrial accident-related WHMDs, number of cases of WRMD) and financial benefits (cost of workers' compensation insurance and lost work days related to WRMDs) per year before and after WCP. Additionally, we compared self-reported pain intensity and functional disability in subjects with musculoskeletal pain before and after the WCP. Pain intensity was measured using a visual analog scale (VAS), and functional disability was measured by the neck disability index (NDI) and the Oswestry disability Index (ODI). The number of person diagnosed with industrial accident-related WRMDs, the number of cases of WRMD, the cost of workers' compensation insurance and lost work days related to WRMDs per year decreased by 51%, 37%, 34%, and 47%, respectively, and VAS, NDI, and ODI scores decreased significantly after implementation of WCP (p<.05). Thus, the results of the present study suggest that function-centered, workplace-based WCP was effective in managing WRMDs at an automobile-parts manufacturing company.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3118-3134
• /
• 2013

This paper deliberates for a multimedia transmission scheme combining multiple description coding (MDC) and network coding (NC). Our goal is to take advantage from the property of MDC to provide quantized and compressed independent and identically distributed (iid) descriptions and also from the benefit of network coding, which uses network resources efficiently to recover lost data in the network. Recently, p-cycle NC has been introduced to recover and protect any lost or distorted descriptions at the receiver part exactly without need of retransmission. So far, MDC have not been explored using this type of NC. Compressed and coded descriptions are transmitted through the network where p-cycle NC is applied. P-cycle based algorithm is proposed for single and multiple descriptions lost. Results show that in the fixed bit rate, the PSNR (Peak Signal to Noise Ratio) of our reconstructed image and also subjective evaluation is improved significantly compared to previous work which is averaging method joint with MDC in order to conceal lost descriptions.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.165-174
• /
• 2021

The construction industry causes the most accidents and fatalities among all industries. Although many efforts have been made to reduce safety accidents in construction, the study on the lost workdays that return to work place is insufficient. Therefore, this study proposes a model that classifies the lost workdays lost into moderate and severity, and derives the importance of variable and analyzes important factors through the trained random forest model. We analyze the learning process of the random forest which is a black box model, and extracted important variables that impact on the severity of the lost workdays through the extracted feature importance. The factors existing inside were analyzed through the extracted variables. The purpose of this study is to analyze the accident case data at the construction site through a random forest model and to review variables that have a high impact on the lost workdays. In the future, this sutdy can apply to improve construction safety management and reduce the accident of industrial accidents.