• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.520-533
• /
• 2021

It is necessary to increase the blasting efficiency in order to minimize the economic loss caused when the excavation cross section is reduced due to the stability problem of underground mining development, and for this, a new blasting design is proposed. In this study, the blasting efficiency of the general design in the field, the suggestion designI, which added two columns to production blasting, and the suggestion design II, which added one column to create asymmetry, is compared. Advance rate and fragmentation were selected as the evaluation index of the blasting efficiency. In the case of advance rate, compared to the normal, the suggestionI improved by 6.07% and the suggestionII improved by 4.65%. In the case of fragmentation, based on P80, compared to the normal, the suggestionI reduced about 58% and the suggestionII was about 47%. Accoording to the evaluation index, the suggestion designI shows better blasting efficiency than the suggestion designII. But considering the additional work time and cost required for the suggestion designI due to the insignificant difference in the evaluation index results, the asymmetry V-cut, the suggestion designII, is judged to be a more suitable blasting design for the site.

• Korean journal of applied entomology
• /
• v.45 no.3 s.144
• /
• pp.327-331
• /
• 2006

This study was carried out to determine the economic injury level of the rice leaffolder,Cnaphalocrocis medinalis G.. The damage aspects of rice plant (at tilling stage) by leaf folders at different larval density per plant were studied in pot experiment (24 cm in diameter, 18 cm in height). One leaf folder consumed 6-7 leaves during larval stage. The damage by leaf folders was simulated by cutting off 0, 10, 30, 50, 70, and 90% of leaves before and after heading stage July 15th (at panicle initiation stage) and August 15th (at milk stage), respectively. When leaves were cut before the heading of rice, the linear relationships between the leaf cutting rate (X) and each factors of yield (Y) were as following; for grain maturity it was Y = -9.379X + 83.630 ($R^{2}=0.493$),\;Y = 0.139X + 0.490 ($R^{2}=0.925$) for yield, and Y = -4.880X + 81.116 ($R^{2}=0.665$) for head rice. When leaves were cut after the heading of rice, it was Y = -23.0l4X + 83.589 ($R{2}=0.915$), for grain maturity, Y=0.141X + 3.466 ($R^{2}=0.842$) for yield, and Y = -13.795X + 81.964 ($R^{2}=0.898$) for head rice. We found that when leaf cutting after the heading stage caused more damage than before the heading in terms of yield and yield components. Based on theses results the economic threshold level was estimated to be 30% and 7% leaf loss before and after heading stage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.4
• /
• pp.353-357
• /
• 1983

A field study was conducted for 20 soil columns to investigate the denitrification in the grassland with a method introducing $C_2H_2$ in the denitrifying system. Since acetylene blocked the pathway from $N_2O$ to $N_2$, all the free products of denitrification consisted of nitrous oxide. In this study, denitrification was measured as $N_2O$. Results are as follows. 1. In most of boils examined, denitrification was observed as $N_2O$ when acetylene was introduced into the denitrification system while $N_2O$ was scarcely evolved without acetylene in the system. 2. Denitrification occurred even in the grassland soils when they were saturated with water. Denitrification was nil or negligible without water saturation. 3. Denitrification loss far 3 days incubation(from 13th to 16th day after urea application) was 4.2% in average and 14.2% in maximum. 4. Soil chemical properties such as nitrate nitrogen, nitrite nitrogen, total nitrogen, total carbon and mineralizable carbon did not show clear relationships with denitrificatien, probably since soil chemical properties were analysed for the soils after incubation.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.287-296
• /
• 2020

Mine Reclamation Project is being carried out with the aim of ensuring a sustainable green living and helping to develop eco-friendly mines by analyzing, removing and preventing the harmful factors. Mines developed during the japanese colonial period and mining boom period are still not repaired throughout the country, and from these scattered risks, public safety is worth pursuing as a top priority. The project that is close to public safety in the mine recalmation project is an emergency treatment, and the most widely used method is a filling method similar to the ground subsidence prevention. If dangerous mine cavity or tunnels are located in the mountains, charging with existing materials may not be possible, or unreasonable cases may occur, and new methods of technological development are required. Emergency actions should be carried out safely and efficiently to prevent the loss of precious people's lives on the hiking paths adjacent to dangerous mining sites. In these field conditions, urethane foam materials may be an alternative. In this study, the applicability of urethane foam materials in mining was reviewed through overseas cases. It was also tested on the appropriate depth of top soil for the protection of urethane foam materials through forest fire simulation test. The test result show that approximately 15cm of soil covering (recommended 20cm over) was suitable for maintaining the function of foam materials from forest fires.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.430-438
• /
• 2013

In this study, the seasonal field survey was conducted in Goseong Jaran Bay(22 stations), Geoje Hansan Bay(15 stations) and Jinhae Bay(18 stations). We analyzed the sediment environmental parameters(Chemical Oxygen Demand, Ignition Loss, Acid Volatile Sulfides, Total Organic Carbon) and biotic parameters of macrobenthic polychaetes(number of species, density, diversity, evenness). It had a good correlation between total organic carbon and polychaete diversity(R=0.61, P<0.01), and we made a decision them as representative environmental indices. As a result of that, regarding the criteria in the assessment of farm environment, we suggest concentrations of total organic carbon : Peak Point = 15 mg/g dry, Warning Point = 26 mg/g dry, Contaminated Point = 31 mg/g dry and polychaete diversity : ~2.6(Good), 2.6~2.1(Moderate), 2.1~1.2(Poor) and 1.2~(Bad). This could be a scientific basis to establish the environmental standards for fishery management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.982-990
• /
• 2019

The interest of researchers and governments in exploiting tidal energy resources is increasing. Jangjuk strait is a place with high tidal energy density potential and is therefore appropriate for the constructing of a tidal turbine farm. In this study, a numerical approach is presented to evaluate the current flow and power potential in Jangjuk strait with an ADCIRC model. Then, the tidal field characteristics are utilized as input parameters for tidal resource calculation with an in-house program. The 1 MW scale tidal energy converter devices are employed and arranged in 4 layouts to investigate the annual energy yield as well as flow deficit due to the wake ef ect at the surveyed area. The best-performed array generates an annual energy yield up to 12.96 GWh/year (without considering the wake effect); this value is reduced by 0.16 GWh/year when accounting for the energy loss caused by the flow deficit. Moreover, by altering the turbine yaw angle during the flood and ebb tides, the impacts of this factor on the energy extraction are analyzed. This indicates that the turbine array attains the maximum tidal power when the turbine yaw angle is at 346° and 164° (clockwise, to the North) for the spring and neap tide in turns.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.185-185
• /
• 2019

Sustaining future wheat production is challenged by anthropogenically forced climate warming and drying led by increased concentration of greenhouse gases all around the globe. Warming stresses, originating from the elevated $CO_2$ concentration, are continuously reported to have negative impacts on wheat growth and yield. Yet, elevated $CO_2$ concentration, despite being disparagingly blamed for promoting warming, is also associated with a phenomenon called $CO_2$ enrichment; in which wheat yield can improve due to the enhanced photosynthesis rates and less water loss through transpiration. The conflicting nature of climate warming and $CO_2$ enrichment and their interplay can have specific implications under different environments. It is established form the field and simulation studies that the two contrasting phenomena would act severely in their own respect under arid and semi-arid environments. Wheat is a dietary staple for masses in Pakistan. The country's wheat production system is under constant stress to produce more from irrigated agricultural lands, primarily lying under arid to semi-arid environments, to meet the rapidly growing domestic needs. This work comprehensively examines the warming impacts over wheat yield and water productivity (WP), with and without the inclusion of $CO_2$ enrichment, under semi-arid environment of Punjab which is the largest agricultural province of Pakistan. Future wheat yields and WPs were simulated by FAO developed AquaCrop model v 5.0. The model was run using the bias-correction climate change projections up to 2080 under two representative concentration pathways (RCP) scenarios: 4.5 and 8.5. Wheat yield and WPs decreased without considering the $CO_2$ enrichment effects owing to the elevated irrigation demands and accelerated evapotranspiration rates. The results suggested that $CO_2$ enrichment could help maintain the current yield and WPs levels during the 2030s (2021-2050); however, it might not withhold the negative climate warming impacts during the 2060s (2051-2080). Furthermore, 10 - 20 day backward shift in sowing dates could also help ease the constraints imposed by climate warming over wheat yields and WPs. Although, $CO_2$ enrichment showed promises to counteract the adverse climate warming impacts but the interactions between climate warming and $CO_2$ concentrations were quite uncertain and required further examination.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.25-32
• /
• 2021

In this study, it proposes a mode converter that is relatively easy to implement and can shorten the transmission line length of the final combining port and it was fabricated and tested by applying it to an 8-way spatial combiner. The proposed mode converter converts the signal converted from the doorknob-shaped circular disk connected to the ground into the TM₀₁ mode by opening it in the circular waveguide. The 8-way waveguide spatial combiner is designed and implemented so that 8 signals input from the H-plane are combined in a circular waveguide at the center, and the final combining mode is TM₀₁. The test results confirmed excellent performance with an insertion loss of less than 0.4dB and a combining efficiency of 95% or more. In addition, it was confirmed that it is suitable for high output by calculating the breakdown voltage and discharge threshold power of the new mode conversion structure through electric field analysis. The results confirmed through this study are expected to be applicable to high-power, high-efficiency SSPA in various fields in the future.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.3
• /
• pp.31-42
• /
• 2021

We propose a deep learning-based method that can estimate an appropriate lighting of both indoor and outdoor images. The method consists of two networks: Crop-to-PanoLDR network and LDR-to-HDR network. The Crop-to-PanoLDR network predicts a low dynamic range (LDR) environment map from a single partially observed normal field of view image, and the LDR-to-HDR network transforms the predicted LDR image into a high dynamic range (HDR) environment map which includes the high intensity light information. The HDR environment map generated through this process is applied when rendering virtual objects in the given image. The direction of the estimated light along with ambient light illuminating the virtual object is examined to verify the effectiveness of the proposed method. For this, the results from our method are compared with those from the methods that consider either indoor images or outdoor images only. In addition, the effect of the loss function, which plays the role of classifying images into indoor or outdoor was tested and verified. Finally, a user test was conducted to compare the quality of the environment map created in this study with those created by existing research.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.190-196
• /
• 2023

Recently, following the development of LIDAR technology which can detect distance from the object, the interest for LIDAR based 3D object detection network is getting higher. Previous networks generate inaccurate localization results due to spatial information loss during voxelization and downsampling. In this study, we propose an attention-based convergence method and a camera-LIDAR convergence system to acquire high-level features and high positional accuracy. First, by introducing the attention method into the Voxel-RCNN structure, which is a grid-based 3D object detection network, the multi-scale sparse 3D convolution feature is effectively fused to improve the performance of 3D object detection. Additionally, we propose the late-fusion mechanism for fusing outcomes in 3D object detection network and 2D object detection network to delete false positive. Comparative experiments with existing algorithms are performed using the KITTI data set, which is widely used in the field of autonomous driving. The proposed method showed performance improvement in both 2D object detection on BEV and 3D object detection. In particular, the precision was improved by about 0.54% for the car moderate class compared to Voxel-RCNN.