• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2516-2518
• /
• 2005

In this paper, the dynamic models of SOFC are suggested. It consists of electrochemical model, thermal model, voltage equation and several loss equations. Control problem on tracking steady voltage by air flow is discussed and an adaptive controller is designed to withstand to the variation of stack current. Simulation is done to prove the solution of control algorithms.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.297-305
• /
• 2009

Multiprotocol label switching (MPLS) networks require dynamic flow admission control to guarantee end-to-end quality of service (QoS) for each Internet protocol (IP) traffic flow. In this paper, we propose to tackle the joint routing and admission control problem for the IP traffic flows in MPLS networks without rerouting already admitted flows. We propose two mathematical programming models for this problem. The first model includes end-to-end delay constraints and the second one, end-to-end packet loss constraints. These end-to-end QoS constraints are imposed not only for the new traffic flow, but also for all already admitted flows in the network. The objective function of both models is to minimize the end-to-end delay for the new flow. Numerical results show that considering end-to-end delay (or packet loss) constraints for all flows has a small impact on the flow blocking rate. Moreover, we reduces significantly the mean end-to-end delay (or the mean packet loss rate) and the proposed approach is able to make its decision within 250 msec.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.957-966
• /
• 2023

In this paper, we propose a new real-time adaptive PID temperature control technique. This is a technique that prevents overshoot by introducing a model that represents the control object. To prevent excessive integration that causes overshoot, integral control adjusts the integral gain to track the heat loss of the model in real time. In the conventional PID control, the integration was dependent on proportional control and the gain was fixed to a constant. As a result, applying two gains that mismatch each other could cause excessive overshoot. However, the proposed adaptive control actively eliminates overshoot so that the integral control amount does not always exceed the heat loss. The cause of overshoot in PID control is integration. Basically, proportional control does not cause overshoot. Therefore, according to the proposed technique, adaptive PID control without the need for tuning experiments can be realized.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.7
• /
• pp.15-25
• /
• 2011

This proposes an online loss minimization algorithm for series PI(SPI) based interior permanent magnet synchronous motor(IPMSM) drive to yield high efficiency and high dynamic performance over wide speed range. The loss minimization algorithm is developed based on the motor model. In order to minimize the controllable electrical losses of the motor and thereby maximize the operating efficiency, the d-axis armature current is controlled optimally according to the operating speed and load conditions. For vector control purpose, a SPI is used as a speed controller which enables the utilization of the reluctance torque to achieve high dynamic performance as well as to operate the motor over a wide speed range. Also, this paper proposes current control of model reference adaptive fuzzy controller(MFC), and estimation of speed using artificial neural network(ANN) controller. The proposed efficiency optimization control, SPI, MFC, ANN in this paper is applied to IPMSM drive system, the validity of this paper is proved by analyzing response characteristics in variety operating conditions.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.31-36
• /
• 2007

TCP (Transmission Control Protocol) is one of the protocols which are widely used from the Internet environments. Through the flow control of TCP, it could be increased efficiency for the loss and a re-transmission of data and the flow control become accomplished through window technique which puts the limit of size. By the flow control, TCP divided in various versions. In this paper, it is analyzed the simulation result which applies the error model in the Newreno which is an improved model of the representative Tahoe, Reno.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.43-46
• /
• 1995

Adaptive algorithms based on gradient adaptation have been extensively investigated and successfully jointed with active noise/vibration control applications. The Filtered-X LMS algorithm became one of the basic feedforward algorithms in such applications, but still is not fully understood. The error path model effect on the Filtered-X LMS algorithm has been under the investigation and some useful properties related stability has been discovered. We are interested in utilizing the fact that the model error caused by the way optimizing the error path model in a view point of convergence speed of Filtered-X LMS algorithm for pure tone noise suppression application without any performance loss at steady state.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.10a
• /
• pp.31-39
• /
• 1993

This paper considers a procedure for the economic design of a cumulative score(CUSCORE) control chart and more sensitive than X-type control chart for small shift to control the mean of a process with a exponentially distributed quality characteristic. An expected loss - cost model as a function of design variables(sample size, sampling interval, scoring limit and decision limit) is derived. Direct search techniques are used to optimize the model subject to ARL in control. Numerical examples and sensitivity analysis of the model are presented. For selected values of situation parameters a comparison study with CUSUM charts is given. CUSCORE control charts compare favourably with CUSUM charts in cost for speedy production process. The proposed control chart can be directly applied for controlling the lifetime characteristics.

• Journal of Navigation and Port Research
• /
• v.44 no.5
• /
• pp.423-429
• /
• 2020

A ship's automatic steering system is the basis for addressing control difficulties related to course-changing and course-keeping during navigation through heading angle control, and is a link in realizing unmanned and autonomous ships. This study proposes a robust RCGA-based linear active disturbance rejection controller (LADRC) design method considering environmental disturbances, measurement noise, and model uncertainties in designing a ship heading controller for use when the ship is sailing. The LADRC consisted of a transient profile, a linear extended state observer, and a PD controller. The control gains in the LADRC with the linear extended state observer were adjusted by RCGAs to minimize the integral of the time-weighted absolute error (ITAE), which is an evaluation function of the control system. The proposed method was applied to ship heading control, and its effectiveness was validated by comparing the propulsive energy loss between the proposed method and a conventional linear PD controller. The simulation results showed that the proposed method had the advantages of lower propulsive energy loss, more robustness, and higher tracking precision than the conventional linear PD controller.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.579-585
• /
• 1996

A CATHENA model for the reactor regulating system is developed and tested independently. A CATHENA plant model is created by combining this model with the reference CATHENA model which has been developed to analyze a loss-of-coolant accident (LOCA) for the Wolsong 2 generating station. This model is intended to provide a trip coverage analysis capability. The CATHENA reactor regulating system model includes the demand power routine. the light water zone control absorbers, mechanical control absorbers and adjusters. The CATHENA model is tested for steady state at 103% full power. A postulated accident transient (small LOCA) was also tested. The results show that the control routines in CATHENA were set up properly.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.18-29
• /
• 2007

The main objective of this paper is to propose a new stability analysis method for a networked control system with multiple packet transmission. The new scheduling method that can guarantee the maximum time delay and discrete switch state equation model which represent a network data loss is proposed. The equivalent model of a MIMO(multi-input multi-output) networked control system is derived from a state space model of linear time invariant interconnected systems in the form of asynchronous dynamical system. Using this model, this paper presents new stability theorems that can determine stability of the networked control system with regard to time delay, data loss, and the number of transmission packets. Simulation results verify the effectiveness of proposed stability analysis method.