• 한국통신학회논문지
• /
• 제18권8호
• /
• pp.1190-1200
• /
• 1993

본 연구에서는 입력이 시간 지연에 민감한 트래픽과 손실에 민감한 트래픽으로 이루어진 경우의 우선순위제어기능을 가진 출력버퍼형의 ATM 스위치의 성능을 분석하였다. 손실우선순위제어 메카니즘으로는 부분 버퍼공유 방법을 택했고, 시간우선순위제어 메카니즘으로는 HOL(Head Of Line)우선순위 제어메카니즘을 택했다. 손실에 민감한 트래괵은 포아송 프로세스로 모델링하였고 시간 지연에 민간한 트래픽은 MMPP로 모델링하였다. 손실우선순위제어에서는 손실우선순위제어 메카니즘을 사용할때 손실에 민간한 트래픽의 셀손실률이 감소함을 확인하였고, 시간우선순위제어에서는 HOL 우선순위제어 메카니즘을 사용할때 시간 지연에 민감한 트래픽의 평균 시간지연이 간소함도 확인하였다. 이 결과로부터 시간우선순위제어와 손실우선순위제어를 동시에 사용하면 시간 지연에 민감한 트래괵과 손실에 민감한 트래픽의 서비스질을 동시에 만족하게 할 수가 있다는 것을 확인하였다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.323-333
• /
• 2017

This paper proposes a model-based optimal control algorithm for the clamp switch of a zero-voltage switching (ZVS) bidirectional DC-DC converter. The bidirectional DC-DC converter (BDC) can accomplish the ZVS operation using the clamp switch. The minimum current for the ZVS operation is maintained, and the inductor current is separated from the input and output voltages by the clamp switch in this topology. The clamp switch can decrease the inductor current ripple, switching loss, and conduction loss of the system. Therefore, the optimal control of the clamp switch is significant to improve the efficiency of the system. This paper proposes a model-based optimal control algorithm using phase shift in a micro-controller unit. The proposed control algorithm is demonstrated by the results of PSIM simulations and an experiment conducted in a 1-kW ZVS BDC system.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.157-163
• /
• 2006

A modified ratio control algorithm is proposed for the improvement of the fuel economy for a metal belt CVT. In the modified ratio control algorithm, the CVT ratio is controlled to operate the engine on the optimal operation region which provides the best efficiency from the view point of the overall efficiency of the engine-CVT system. In order to construct the modified ratio map, the CVT system loss model is used by assuming that the all the loss is attributed to the torque loss. It is found from the simulation results that the fuel economy by the modified ratio control algorithm is improved by 5.5 percents compared with the existing ratio control.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.74-80
• /
• 2014

Generator protection device has to detects an internal fault conditions in generator and abnormal operating conditions must be due to the hazards. Loss of excitation may cause generator itself failure as well as serious operating problem in power system, and then requires an appropriate response of generator protection device. Details modeling of generator control system and analysis of transient states in generator are important for optimal operation in power plants. In addition, the fault simulation data are also used for testing the characteristics of IED. In this paper, the hydro generator control system using PSCAD/EMTDC, visual simulation for power systems, was modeled. The generator control system which is composed of generator, turbine, exciter, governor was implemented. The parameters of generator control system model were obtained from field power plant. Loss of excitation simulations were performed while varying the fixed load. Several signals analysis were also performed so as to analyze transients phenomena.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.40.1-40
• /
• 2001

In this paper, control theoretic approaches are proposed to guarantee QoS (Quality of Series) such as packet delay and packet loss of real-time traffic in high-speed communication network. Characteristics of variable rate real-time traÆc in communication networks are described. The mathematical model describing networks including source and destination nodes are suggested. By a traffic control mechanism, it is shown that worst-case end-to-end transfer delay of traffic can be controlled and packet loss can be prevented. The simulation shows results of delay control and buer level control to raise QoS in realtime traffic.

• 품질경영학회지
• /
• 제18권1호
• /
• pp.77-83
• /
• 1990

A model for the economic design of an pn control charts with an assignale cause is presented and the loss-cost function for control schemes using these charts is derived. By minimizing this function with respect to the three control variables, namely, the sample size, the sampling interval and acceptance number, the economically optimal control plan can be optained. The article shows what influence increasing or decreasing condition, according to changeability of the size of these factors, of expected cost can have on the economy when an attribute control chart is used.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1114-1123
• /
• 2017

A linear permanent-magnet vernier (LPMV) motor has magnets and windings in the short mover, which is very suitable for long stroke applications. This paper proposed a new field oriented control with space vector pulse width modulation for the LPMV motor, which considers loss minimization. First, the topology of the LPMV motor is briefly presented. Then, the mathematical model is derived, and the mover field oriented control strategy is proposed. Also, the loss analysis is performed. Finally, the simulated and experimental results are given, verifying the feasibility and effectiveness of the proposed control strategy.

• ETRI Journal
• /
• 제20권3호
• /
• pp.251-271
• /
• 1998

It is well known that if usage parameter control/network parameter control (UPC/NPC) functions are used together with a cell loss priority control scheme in ATM networks, the measurement phasing problem can occur. This makes it difficult for a network provider to define and commit the cell loss ratio as a QoS parameter. To solve the problem, we propose a new UPC/NPC algorithm. By using the proposed UPC/NPC algorithm, we can define the cell loss ratios for CLP = 0 and CLP = 0+1 cell streams without the measurement phasing problem under any conditions. We analyzed the performance of the proposed UPC/NPC algorithm. Using a discrete time model for the UPC/NPC architecture with a discrete-time semi-Markov process (DSMP) input model, we obtained the cell discarding probabilities of CLP = 0 and CLP = 0+1 cells streams and showed that more CLP = 0 cells are accepted compared to what was proposed in ITU-T.

• 한국경영과학회지
• /
• 제12권1호
• /
• pp.111-111
• /
• 1987

With the increasing interest of reducing process variation, statistical process control has served the pivotal tool in most industrial quality programs. In this study, system analyses have been performed associated with a cost incorporated version of a process control, a quadratic loss-based X over bar control chart model. Specifically, two issues, the capital/research investments for improvement of a system and the precision of a parameter estimation, have been addressed and discussed. Through the analysis of experimental results, we show that process variability is seen to be one of the most important sources of loss and quality improvement efforts should be directed to reduce this variability. We further derive the results that, even if the optimal designs may be sensitive, the model appears to be robust with regard to misspecification of parameters. The approach and discussion taken in this study provide a meaningful guide for proper process control. We conclude this study with providing general comments.

• 사물인터넷융복합논문지
• /
• 제1권1호
• /
• pp.1-4
• /
• 2015

본 논문은 TCP 혼잡제어 메커니즘의 슬로우-스타트 단계에서 웹 객체의 평균전송 시간을 추정하기 위한 수학적 모델을 제안한다. 평균 지연은 네트워크의 종단 사용자가 필요로 하는 중요한 서비스 품질이다. 제안하는 모델의 적용대상은 작은 윈도우 크기로 인해 패킷손실이 슬로우-스타트 구간에서만 발생하는 멀티-홉 무선 네트워크와 대역폭이 작은 사물 인터넷을 대상으로 한다. 모델은 초기 윈도우 크기와 패킷 손실률을 고려하여 지연시간을 구한다. 제안한 모델은 주어진 패킷손실에 대해 라운드 트립 타임과 초기 윈도우 크기에 따라 주로 영향을 받게 되며, 종단 사용자가 사물 인터넷 응용 서비스에 요구하는 응답시간을 추정하는 데 적용될 수 있다.