• Archives of Plastic Surgery
• /
• v.48 no.4
• /
• pp.366-372
• /
• 2021

Background The result of illicit polymer injection is chronic inflammation with foreign-body granuloma (FBG) formation. Treatment can be divided into medical and surgical. Some patients develop severe complications with need surgical treatment. This study aims to describe patients who underwent surgical removal of the FBGs and autoimmune/inflammatory syndrome induced by adjuvants (ASIA); additionally, we evaluated the quality of life after surgery. Methods In this retrospective single-center study, the authors examined data of patients who underwent surgical removal of FBG caused by illicit polymer injection for cosmetic purposes and confirmed ASIA from 2015 to 2020 by three different surgical approaches. Descriptive summary statistics were reported on patient demographics, presenting symptoms and clinical examination features, treatment strategies, histopathology reports and quality of life. Results The cohort included 11 female patients with FBGs and ASIA. The most affected anatomical zones were the combination of gluteal region, thighs and legs (40%); and thighs with legs (20%). Main presentation was: skin hyperpigmentation (90.9%), skin induration (63.6%), chronic fatigue (63.6%), and ulcers (36.4%). Surgical modalities consisted of: ultrasonic-assisted liposuction in four patients (36.4%); open en bloc excision and primary closure in four patients (36.4%); and open en bloc excision and microsurgical reconstruction in three patients (27.2%). The postoperative quality of life visual analog scale score was 83.9. Conclusions ASIA treatment represents a challenge for the plastic surgeon. Adequate surgical treatment emphasizing, when possible, the total or near-total resection of the FBG must be performed to improve ASIA evolution.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1674-1683
• /
• 2021

Objective: A study was conducted to determine the physicochemical quality and consumer acceptability of beef frankfurter-type sausages formulated with pecan nut paste and Mexican oregano oil (MO) of two varieties, Poliomintha longiflora Gray (Mexican oregano Poliomintha, MOP) or Lippia berlandieri (Mexican oregano Lippia, MOL). Methods: Frankfurters were processed under six treatment conditions: control (10.67% pork fat), MOP (control + 0.01% MOP), MOL (control + 0.01% MOL), MOP-N (control + 0.01% MOP + 6% pecan nut paste), MOL-N (control + 0.01% MOL + 6% pecan nut paste), and C-N (control + 6% pecan nut paste). The physicochemical properties and the consumer acceptability were determined. Results: The addition of MO and nut did not influence the water holding capacity, drip loss, and luminosity of frankfurters, but those ingredients increased pH and shear force (p<0.05) and decreased redness (p<0.05) of frankfurters. Frankfurters were generally well accepted by consumers. However, general acceptability of sausages decreased with the addition of MO. Control sausages showed the highest acceptability. Conclusion: The MO and pecan nut paste do not affect drastically the quality of frankfurters. These results provide evidence that partial replacement of pork fat by pecan nut in frankfurters maintain a consistent physicochemical quality and its commercialization looks promising given consumers' acceptance.

• Journal of Periodontal and Implant Science
• /
• v.51 no.6
• /
• pp.386-397
• /
• 2021

Purpose: MicroRNAs (miRNAs) are epigenetic post-transcriptional regulators that modulate gene expression and have been identified as biomarkers for several diseases, including cancer. This study aimed to systematically review the relationship between miRNAs and periodontal disease in humans, and to evaluate the potential of miRNAs as diagnostic and prognostic biomarkers of disease. Methods: The review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines (reference number CRD42020180683). The MEDLINE, Scopus, Cochrane Library, Embase, Web of Science, and SciELO databases were searched for clinical studies conducted in humans investigating periodontal diseases and miRNAs. Expression levels of miRNAs across the different groups were analysed using the collected data. Results: A total of 1,299 references were identified in the initial literature search, and 23 articles were finally included in the review. The study designs were heterogeneous, which prevented a meta-analysis of the data. Most of the studies compared miRNA expression levels between patients with periodontitis and healthy controls. The most widely researched miRNA in periodontal diseases was miR-146a. Most studies reported higher expression levels of miR-146a in patients with periodontitis than in healthy controls. In addition, many studies also focused on identifying target genes of the differentially expressed miRNAs that were significantly related to periodontal inflammation. Conclusions: The results of the studies that we analysed are promising, but diagnostic tests are needed to confirm the use of miRNAs as biomarkers to monitor and aid in the early diagnosis of periodontitis in clinical practice.

• Advances in Computational Design
• /
• v.4 no.3
• /
• pp.273-294
• /
• 2019

In this paper is presented the minimum cost (optimal design) for reinforced concrete circular isolated footings based on an analytic model. This model considers a load and two moments in directions of the X and Y axes, and the pressure has a variation linear, these are the effects that act on the footing. The minimum cost (optimal design) and the Maple program are shown in Flowcharts. Two numerical experiments are shown to obtain the minimum cost design of the two materials that are used for a circular footing supporting an axial load and moments in two directions in accordance to the code of the ACI (American Concrete Institute), and it is compared against the current design (uniform pressure). Also, the same examples are developed through the normal procedure to verify the minimum cost (optimal design) presented in this document, i.e., the equations of moment, bending shear and punching shear are used to check the thickness, and after, the steel areas of the footing are obtained, and it is compared against the current design (uniform pressure). Results section show that the optimal design is more accurate and more economical than to any other model. Therefore, it is concluded that the optimized design model presented in this paper should be used to obtain the minimum cost design for the circular isolated footings.

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.307-318
• /
• 2019

The frequently excessive vibrations presented in civil structures during seismic events or service conditions may result in users' discomfort, or worst, in structures failure, producing economic and even human casualties. This work contributes in proposing the synthesis of a nonlinear optimal control strategy for semiactive structural control, with the main characteristic that the synthesis considers both the structure model and the semiactive actuator nonlinear dynamics, which produces a nonlinear system that requires a nonlinear controller design. The aim is to reduce the unwanted vibrations in the response of civil structures, by means of intelligent fluid semiactive actuator such as the Magnetorheological Damper (MRD), which is a device with a low level of power consumption. The civil structures for which the proposed control methodology can be applied are those admitting a state-dependent coefficient factorized representation model, such as buildings, bridges, among others. A scaled model of a three storey building is analyzed as a case study, whose dynamical response involves displacement, velocity and acceleration of each one of the storeys, subjected to the North-South component of the September 19th., 2017, Puebla-Morelos (7.1M), Mexico earthquake. The investigation rests on comparing the structural response over time for two different conditions: with no control device installed and with one MRD installed between the first floor and the ground, where a nonlinear optimal signal for the MRD input voltage is determined. Simulation results are presented to show the effectiveness of the proposed controller for reducing the building's dynamical response.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.689-697
• /
• 2018

This paper presents a model of the elastic curve for rectangular beams with straight haunches under uniformly distributed load and moments in the ends considering the bending and shear deformations (Timoshenko Theory) to obtain the deflections and rotations on the beam, which is the main part of this research. The traditional model of the elastic curve for rectangular beams under uniformly distributed load considers only the bending deformations (Euler-Bernoulli Theory). Also, a comparison is made between the proposed and traditional model of simply supported beams with respect to the rotations in two supports and the maximum deflection of the beam. Also, another comparison is made for beams fixed at both ends with respect to the moments and reactions in the support A, and the maximum deflection of the beam. Results show that the proposed model is greater for simply supported beams in the maximum deflection and the traditional model is greater for beams fixed at both ends in the maximum deflection. Then, the proposed model is more appropriate and safe with respect the traditional model for structural analysis, because the shear forces and bending moments are present in any type of structure and the bending and shear deformations appear.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1439-1447
• /
• 2019

Objective: The aim of this study was to evaluate the effect of dietary incorporation of tanninrich woody species on meat oxidative stability, carcass traits and meat quality in goats. Methods: Two tannin-rich species were tested using a three-treatments feeding trial, where treatments consisted of: Larrea divaricata and Acacia aroma both at 12.5% in dry matter basis of the diet and a control diet (alfalfa hay). All feeding diets were iso-protein and iso-energy. Carcass conformation, carcass compactness, carcass fatness and subcutaneous fat deposition were evaluated. Intake, liveweigh, Longissimus thoracis et lumborum muscles of goats were analyzed in order to evaluate quality parameters such as pH value, instrumental color evaluation, water holding capacity, total phenolic content, antioxidant activity, meat oxidative stability and fatty acid profiles in meat. Results: Feed intake, liveweight gain, carcass, and meat traits did not differ among treatments. Changes in meat lipid profile among treatments were observed for oleic and elaidic acid contents. Meat total phenolic content and antioxidant activity did not differ among treatments; although, meat oxidative status after storage at room temperature, as well as under refrigerated and frozen conditions were different between control and both supplemented groups. Conclusion: The inclusion of Acacia aroma and Larrea divaricata leaves in goat diet enhanced meat oxidative stability. Modulation of the ruminal biohydrogenation of fatty acids produced by condensed tannins of these plant species need to be further investigated.

• Steel and Composite Structures
• /
• v.30 no.2
• /
• pp.109-121
• /
• 2019

This paper presents the second part of the modeling for the strap combined footings, this part shows a mathematical model for design of strap combined footings subject to axial load and moments in two directions to each column considering the soil real pressure acting on the contact surface of the footing for one and/or two property lines of sides opposite restricted, the pressure is presented in terms of an axial load, moment around the axis "X" and moment around the axis "Y" to each column, and the methodology is developed using the principle that the derived of the moment is the shear force. The first part shows the optimal contact surface for the strap combined footings to obtain the most economical dimensioning on the soil (optimal area). The classic model considers an axial load and a moment around the axis "X" (transverse axis) applied to each column, i.e., the resultant force from the applied loads is located on the axis "Y" (longitudinal axis), and its position must match with the geometric center of the footing, and when the axial load and moments in two directions are presented, the maximum pressure and uniform applied throughout the contact surface of the footing is considered the same. A numerical example is presented to obtain the design of strap combined footings subject to an axial load and moments in two directions applied to each column. The mathematical approach suggested in this paper produces results that have a tangible accuracy for all problems and it can also be used for rectangular and T-shaped combined footings.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.103-113
• /
• 2007

In this paper, we present a security analysis of Lightweight RFID Mutual Authentication Protocols-LMAP[10], $M^2AP$[11], EMAP[12]. Based on simple logic operations, the protocols were designed to be suitable for lightweight environments such as RFID systems. In [8,9], it is shown that these protocols are vulnerable to do-synchronization attacks with a high probability. The authors also presented an active attack that partially reveals a tag's secret values including its ID. In this paper, we point out an error from [9] and show that their do-synchronization attack would always succeed. We also improve the active attack in [9] to show an adversary can compute a tag's ID as well as certain secret keys in a deterministic way. As for $M^2AP$ and EMAP, we show that eavesdropping $2{\sim}3$ consecutive sessions is sufficient to reveal a tag's essential secret values including its ID that allows for tracing, do-synchronization and/or subsequent impersonations.

• The Plant Pathology Journal
• /
• v.37 no.1
• /
• pp.24-35
• /
• 2021

Blue mold caused by Penicillium expansum is one of the most significant postharvest diseases of apples. Some microorganisms associated with the surface of ripening apples possess the ability to inhibit the growth of P. expansum. However, the existing literature about their colonization in the stages before ripening is not explored in depth. This study aims to characterize the antagonistic capacity of bacterial populations from five fruit development stages of 'Royal Gala' apples. The results have shown that the density of the bacterial populations decreases throughout the ripening stages of fruit (from 1.0 × 105 to 1.1 × 101 cfu/㎠). A total of 25 bacterial morphotypes (corresponding to five genera identified by 16S RNA) were differentiated in which Bacillus stood out as a predominant genus. In the in vitro antagonism tests, 10 Bacillus strains (40%) inhibited the mycelial growth of P. expansum from 30.1% to 60.1%, while in fruit bioassays, the same strains reduced the fruit rot ranging from 12% to 66%. Moreover, the bacterial strains with antagonistic activity increased in the ripening fruit stage. B. subtilis subsp. spiziennii M24 obtained the highest antagonistic activity (66.9% of rot reduction). The matrix-assisted laser desorption ionization-time of flight mass spectrometry analysis revealed that bacteria with antagonistic activity produce anti-fungal lipopeptides from iturin and fengycin families.