• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.469-475
• /
• 2014

This study's goal was to obtain basic data about the functional gowns of health care providers. 828 health care providers, including 150 doctors, 224 dentists, 202 nurses, 61 physical therapists and 191 medical technicians, living in Seoul and Daejeon areas, participated in this survey. A questionnaire was created using 15 items about the current health care providers' gowns. 15 items were consisted of 3 parts; satisfaction rate and activity (part 1), preference the details of medical gown (part 2), and personal information (part 3). In this study, "wearer activity" was the main concern for them and the majority of respondents, regardless of their age and type of work, preferred the V neckline, short gown length (waist line), loose sleeves and anti-bacterial textiles. Only the doctors preferred the full sleeves, whereas, the others preferred short sleeves. The younger health care providers showed a slightly higher preference for the slim type gown, while the older providers preferred the straight type. In this study, most health care providers were not satisfied with their current gowns, except dentists. Physical therapist answered the highest score of dissatisfied for current wearing medical gown among the all health care professionals. The 20's answered the highest score of dissatisfaction among the all generation.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.55-62
• /
• 2005

건설현장의 임시전력설비는 최소한의 보호장치, 산만한 작업환경, 전기설비의 노후화 등의 불안요인에 의해 타설비에 비해 많은 감전위해요인을 나타내고 있다. 이중 22.9[kV] 수전설비에 사용되는 계기용변성기 절연커버는 절연커버와 전선 인입 및 인출부 사이의 이격거리가 짧아 전기안전 측면에서 좋은 성능을 나타내지 못하고 있다. 절연커버와 부싱 사이의 크기 차이로 바람, 비등의 외부 환경에 의해 절연커버의 유동이 쉽게 발생하며, 트래킹에 의한 절연파괴로 이어질 수 있다. 따라서 본 논문에서는 전기재해를 효과적으로 방지할 수 있는 계기용변성기 절연커버를 제안하였으며 이미 실용신안으로 등록되었다. 특정 부위의 전계 집중을 감소시키기 위해 절연커버의 형상을 곡면으로 설계하였고 절연커버와 충전부 사이의 이격거리를 기존의 방식보다 더 길어지도록 조정하였다. 제안된 절연커버는 전계해석 프로그램에 의해 평가되었다.

• 정보처리학회논문지B
• /
• 제18B권6호
• /
• pp.385-388
• /
• 2011

디지털 형태로 저장된 의료정보가 네트워크를 통하여 제약 없이 전송될 수 있게 되면서, 환자의 개인정보 관리는 의료 업계에서 중요한 주제로 부각되었다. 현재 두뇌 영상의 의료정보를 보호하는 방법은 환자의 신원을 은닉시키기 위하여 얼굴을 절삭하는 것이다. 그러나 절삭 과정에서 간혹 중요한 두뇌 조직부가 함께 절단되어 탈면 두뇌 영상은 의료 용도로 활용될 수 없게 손상을 입게 된다. 실린더 모양의 마스크를 덧붙임으로써 두뇌 영상의 중요한 모든 정보를 유지하면서 환자의 신원 정보를 은닉시키는 직접적인 방법을 제안하였다. 제안하는 두뇌 영상의 무손실 변경 방법은 중요한 영상정보가 손상되지 않음을 확인하였다. 또한 마스크로 입혀진 두뇌영상의 신원을 확인할 수 없는 사실도 증명되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1363-1366
• /
• 2005

The tiebar is used by joint for keeping from deformation by conserving tensile load between two structure. The tiebar, bolt joining type, is combined by tiebar and clevis like bolt and nut. By coupled, it maintains tensile load. While it goes through repeated load, it occurs to loose because joining force between clevis and nuts is reduced. So, continuos maintenance is needed such as making tighter periodically, repairing the broken part and so on. For that reason, this paper calculates necessary torque unfastening joint for conventional tiebar and presenting tiebar theoretically and then consider the reason that conventional bolt-typed tiebar unties. Also, through vibration untied test for two types of tiebar we confirm that presenting tiebar have a improvement of unfastening when we compare with the conventional one.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.47-54
• /
• 2014

When an anchor penetrates and is installed under a seabed, a portion of the mooring line connected to the anchor is also embedded under the seabed. This embedded mooring line affects the capacity of the anchor in two ways. First, the frictional resistance that occurs between the mooring line and the seabed reduces the pulling force acting on the anchor. Second, the embedded part of the mooring line forms a reverse catenary shape due to the bearing resistance of the soil, so that an inclined pulling force is applied to the anchor. To evaluate the mooring line's effect on the capacity of an anchor in sand, centrifuge model tests were performed using two relative sand densities of 76% and 51% while changing the anchor depths. The test results showed that the load is reduced much more in deep and dense sand, and the inclination angle of the load is lower in shallow and loose sand.

• 한국의류학회지
• /
• 제21권5호
• /
• pp.807-820
• /
• 1997

This exploratory research was intended to develop and test a slacks pattern based upon conic model. Data came from measurements of photograph of three subjects. Silhouette of slacks was close fit on waist and hip and loose under hip level. This three-dimensional form was modeled with truncated cones. This conic model was truncated by plane of the waist level, the abdomen level, the hip level, the crotch level and the ankle level parallel to the floor. Two models that have differences in back part of the model were tested. Drafted patterns from two models were taken for each subject. Drafted experimental pattern was operated for slacks pattern. The first step was to make sideseam. Parts over crotch level were moved to both sides. And then to make waistdarts. Experimental pattern had two darts each in front and back. Each experimental slacks was evaluated by sensory test to appearance and comfort by five judges. The results can be summarized as follows. 1) Appearance and comfort of experimental pattern were judged to be satisfactory. Especially these patterns were fitted we18 in waist darts front and back. So we evaluated that was proper pattern for slacks. 2) Model 2 was better in appearance than model 1. But Model 1 was more comfortable in non significant difference. This was supposed to be resulted from fit more closely of model 2. 3) considering preceding results, this geometric model based upon truncated cone was applicable for slacks pattern.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.32-40
• /
• 1986

A model experiment of purse seine by the circulating water tank was carried out on the changes of net shape and the tension of purseline under operation in two layer current. In the circular tank, the two layer current was made by cutting off the current of upper layer and producing the bottom current by the equipment shown in Fig. 1. The model experiment of purse sein was made on a reduced scale 1 :400, and the experiment was carried out according to the Tauti's model law. When the bottom current of O. 5 knot flows to lower part of three-eighths of net, following results are derived. The depth of sinkerline reached only about 80% of that of no current set. The horizontal shift of sinker line caused by the bottom current is maximized in tight set. The enclosed area by the floatIine immediately after the completion of set net is 61. 5% in tight set, 50. 0 % in loose set and 54. 1 % in lateral set of those in the case of no current. In the first half period of pursing, the tension of the purseline is enhenced by the bottom current and the pattern of increasing is irregular in the tension curves.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.445-454
• /
• 2006

Myungji Housing Complex is located in the Nakdong River plain in which the Busan soft clays are developed. It has thick soft soil laver of about GL(-)50m including loose sandy layers, upper and lower clayey layers. The clayey layers have been being consolidated since the land reclamation was completed to build the place for Housing Complex(Apartment) in 1997. Therefore, as one of a series of advance preparations of this project, study was carried on the geotechnical characteristics under the foundation The first part of this paper represents a brief geological history. Then, geotechnical characteristics of clay was analyzed in the classical developments in soft clay. They were based on the geotechnical data obtained by site investigations performed from 1992 to 2005. Finally, we evaluated the average degree of consolidation at this point in time and the residual settlements of upper clayey layer using dissipation and oedometer tests for this project

• 복식문화연구
• /
• 제18권6호
• /
• pp.1228-1241
• /
• 2010

This study aims to help understanding on design of basic pattern of shirt collars and to suggest schemes to raise completeness of shape by reviewing problems shown in finished products after sewing. From March 2009 to August 2009, 12 patterns for education and firms were collected centering on basic shirt collar form respectively. There are four problems generally raised from a completed shirt collar. In case of overlapping shirt collar on front neck point, the sewing point of shirt collar should be drawn at front neck point of collar band at a distance of about 0.2~0.3cm, and the center front of band and one of bodice should be arranged in a straight line. In case of the problem about right and left length difference of shirt collar, it is raised by closing so the problem was solved by prolonging about 0.2 cm of the center front of left collar. It was evaluated that adjusting notch point when sewing would be more rational solution than solving something on patterns for distance difference problem of shirt collar between right and left part at center front. And a problem about getting loose of front garment between collar band below and the first button was also raised. It was designed 0.2cm cut of collar band. Around basic shirt collar form, above mentioned solutions are applied to the patterns for education and manufacture experimental clothing. So as a result of sensory evaluation, generally good ratings on all items were received.

• Journal of the korean society of oceanography
• /
• 제35권1호
• /
• pp.1-10
• /
• 2000

A two-dimensional numerical model was applied to investigate the sediment transport and sand bank formation in a macrotidal sea, the Kyunggi and Asan Bays. The tidal residual currents show quite complex pattern including counter-rotating eddies off the northwestern corner of the Dugjeok Island that reflect the promontory effect. Complex residual eddies are also present off the coast of the Taeanbando and in the Asan Bay. Net sediment transport pattern shows that sandy sediments in the Kyunggi and Asan Bays are generally transported landward from the outer sea suggesting sediment trapping inside the bays. This phenomenon may be related to the formation and maintenance of numerous sand banks in this macrotidal sea. Alternate occurrences of deposition and erosion predicted from the numerical model along the coast of the Taeanbando with strong deposition on the southwestern part of the 'Jangansatoe'(JSB), a large sand ridge off the coast of the Taeanbando appear to reflect the loose connection of JSB, The 'Joongangcheontoe', a central sand bank (CSB) with the main axis in the NW-SE direction in the Asan Bay may undergo a modification with strong deposition along the northeastern flank. These results indicate that the sand banks are actively modified and maintained by the strong tidal currents in this shallow macrotidal sea.