• 제목/요약/키워드: Loopback

검색결과 17건 처리시간 0.02초

투과광을 이용한 인공심장용 무선정보전달 장치의 개발 (Development of a Transcutaneous Information Transmission System using Transmitted Light for the Total Artificial Heart)

  • 강동우;김희찬;민병구
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1993년도 춘계학술대회
    • /
    • pp.129-131
    • /
    • 1993
  • A transcutaneoos information transmission system using transmitted infrared light for an implantable total artificial heart(TAH) an developed and the performance of the system was tested. In an in vitro test, transmittance of the developed system was measured through various thicknesses of pig shins. In an in vivo test, a loopback test using a personal computer was performed to determine the error rate and an experiment using a mock system was taken. In this experiment, within acceptable lateral and vertical displacements, the error rate of at least 3.8E-6 was guaranteed. Monitoring signals from the internal controller(Intel 87C196) of the mock system were successfully transmitted to the external controller(IBM PC) and the operating commands from the external controller were successfully conducted by the mock system. Communication was done in half duplex mode according to RS-232 protocol at the speed of 4800 bps.

  • PDF

위성 제어용 RF Telecommand 및 Telemetry 시험 장비 설계 및 제작 (Design and fabrication of test equipment of RF Telecommand and Telemetry for satellite control)

  • 장래규;조승원;이형구;홍성용
    • 한국항공우주학회지
    • /
    • 제37권2호
    • /
    • pp.187-192
    • /
    • 2009
  • 지상국과 교신을 위한 위성체의 트랜스폰더를 개발 시작 단계부터 발사 단계까지 동작상태를 시험하기 위한 장비를 설계하였다. 설계한 시험 장비는 COTS(Commercial Off-The-Shelf) 부품을 사용하여 크기와 개발 기간을 단축하였으며, 위성 발사 후 지상국에서도 사용할 수 있도록 설계하였다. 측정 결과 시험 장비의 상향 링크와 하향 링크의 경로 손실은 각각 47.8 dB와 42.6 dB로 나타났다. 또한 송신단의 선형특성은 -50 dBm 출력에서 60.68 dBc의 IMD3를 가진다.

광통신 모듈용 단일 칩 CMOS트랜시버의 구현 (Implementation of a Single Chip CMOS Transceiver for the Fiber Optic Modules)

  • 채상훈;김태련
    • 대한전자공학회논문지SD
    • /
    • 제41권9호
    • /
    • pp.11-17
    • /
    • 2004
  • STM-1 체계의 광통신용 광모듈 송수신부에 내장하기 위한 155.52 Mbps 트랜시버 ASIC을 0.6 ㎛ 2-poly 3-metal 실리콘 CMOS 기술을 이용하여 구현하였다. 제작된 ASIC은 시스템에 의해서 처리된 155.52 Mbps 데이터 신호를 LD를 통하여 광신호로 변환하여 상대 시스템으로 송신하는 트랜스미터의 역할과, 상대 시스템으로부터 전송되어온 155.52 Mbps 광신호를 PD로 수신하여 전기신호로 변환하고 원형으로 복구하는 리시버의 역할을 한다. 트랜스미터와 리시버를 하나의 실리콘 기판에 집적하여 단일 칩 형태의 트랜시버를 설계하기 위하여, 잡음 및 상호 간섭 현상을 방지하기 위한 배치 상의 소자 격리 방법뿐만 아니라 전원분리, 가드링, 격리장벽 등을 도입한 새로운 설계 방법을 적용하였다. 설계된 칩의 크기는 4 × 4 ㎟이며, 루프백 측정에서 지터도 실효치 32.3 ps, 최대치 335.9 ps로 비교적 양호하게 나타났다. 전체 칩의 소비전력은 5V 단일전원 공급 상태에서 약 1.15 W(230 mA)로 나타났다.

MPLS LER을 위한 패킷 프로세서 기반의 포워딩 엔진 (A Forwarding Engine based on the Packet Processor for MPLS LER)

  • 박재형;김미희;정민영;이유경
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제9권4호
    • /
    • pp.447-454
    • /
    • 2003
  • MPLS 망의 경계에 위치한 레이블 에지 라우터는 다른 망과의 연동을 위해서 여러 가지 형태의 프레임을 처리할 수 있어야 한다. 라우터에서 프레임 처리 및 전달을 담당하는 포워딩 엔진은 라우터의 성능에 큰 영향을 미치는 요소이다. 본 논문에서는 여러 형태의 망과 연동 가능한 MPLS LER을 실현하기 위해서, 프로그램 가능한 이더넷 패킷 프로세서를 이용하여 포워딩 엔진을 구현하였다. 포워딩 엔진의 기반이 되는 프로그램 가능한 이더넷 패킷 프로세서에서 ATM 인터페이스를 통해서 들어오는 프레임을 처리하여 그 프레임의 목적지로 향하는 ATM 인터페이스로 보내기 위해서 이더넷 패킷 프로세서의 되돌림 기능을 사용하였다. 본 논문에서 구현된 포워딩 엔진의 성능을 프레임 되돌림 기능의 영향과 프레임을 처리하기 위해서 수행되는 명령어의 수 측면에서 실험을 통하여 분석하였다.

연속 및 버스트모드 통신을 위한 길쌈부호기와 비터비복호기 ASIC 설계 (Design of a convolutional encoder and viterbi cecoder ASIC for continuous and burst mode communications)

  • 장대익;김대영
    • 한국통신학회논문지
    • /
    • 제21권4호
    • /
    • pp.984-995
    • /
    • 1996
  • Data errors according to the various noises caused in the satellite communication links are corrected by the Viterbi decoding algorithm which has extreme error correcting capability. In this paper, we designed and implemented a convolutional encoder and Viterbi decoder ASIC which is used to encode the input data at the transmit side and correct the errors of the received data at the receive side for use in the VSAT communication system. And this chip may be used in any BPSK, QPSK, or OQPSK transmission system. The ambiguity resolver corrects PSK modem ambiguities by delaying, interting, and/or exchanging code symbol to restore their original sequence and polarity. In case of previous decoding system, ambiguity state(AS) of data is resolved by external control logic and extra redundancy data are needed to resolve AS. But, by adopting decoder proposed in this paper, As of data is resolved automatically by internal logic of decoder in case of continuous mode, and by external As line withoug extra redudancy data in burst mode case. So, decoding parts are simple in continuous mode and transmission efficiency is increased in bust mode. The features of this chip are full duplex operation with independent transmit and receive control and clocks, start/stop inputs for use in burst mode systems, loopback function to verify encoder and decoder, and internal or external control to resolve ambinguity state. For verification of the function and performance of a fabricated ASIC chip, we equiped this chip in the Central and Remote Earth Station of VSAT system, and did the performance test using the commerical INTELSAT VII under the real satellite link environmens. The results of test were demonstrated the superiority of performance.

  • PDF

SDR 통신장비를 위한 2단계 적응형 Digital AGC 기법 (Two-stage Adaptive Digital AGC Method for SDR Radio)

  • 박종훈;김영제;조정일;조형원;이영포;윤석호
    • 한국통신학회논문지
    • /
    • 제37권6C호
    • /
    • pp.462-468
    • /
    • 2012
  • 본 논문은 SDR(software-defined radio)기반 무선 통신장비를 위한 디지털 AGC(Automatic Gain Control) 알고리즘에 대한 것이다. 수신신호는 무선 채널 구간에서 발생하는 경로 감쇄 및 수신단 front-end 동작에 의해 시간에 따라 변하는데, 신뢰성 있는 신호 복호를 위해서는 빠르고 정확한 AGC 기술이 적용되어야 한다. 또한, 하나의 수신기에서 다양한 웨이브폼을 수신하는 SDR 통신장비를 위해서는 적응적인 AGC 기술이 필요하다. 본 논문에서 다양한 웨이브폼에 대해 적용하기 위한 2단계로 구성된 적응적 구조를 제안한다. 제안한 적응적 구조는 수신신호 크기에 따라 이득값(gain) 선택 단계를 선택, 변경함으로써 빠르고 안정적인 이득값 조절을 가능하게 한다. 컴퓨터 모의실험을 통하여 제안하는 방식의 수렴속도 및 안정화 정도를 검증하고, 기존 방식과 비교하여 빠른 수렴 속도를 보임을 확인한다.

프로바이더 백본 브리지 망을 위한 백업링크 스패닝트리 기반 링크장애 복구기능과 구현 (A Link Protection Scheme with a Backup Link Spanning Tree for Provider Backbone Bridged Networks and Implementation)

  • 남위정;이헌주;윤종호;홍원택;문정훈
    • 대한전자공학회논문지TC
    • /
    • 제47권1호
    • /
    • pp.58-68
    • /
    • 2010
  • 본 논문에서는 브리지 기반의 백본망을 위한 프로바이더 백본 브리지(Provider Backbone Bridge) 망에서 각 브리지간 링크장애가 발생한 경우 이를 효율적으로 보호할 수 있는 방법인 백업링크에 대한 스패닝트리 기반의 링크장애복구기능을 제안하고 성능을 분석하였다. 제안된 방식은 PBB with Traffic Engineering (PBB-TE)기반의 브리지망에서 대역예약된 마스터링크의 장애시 해당 링크의 트래픽을 루트브리지가 사전에 설정한 스패닝트리 기반의 백업링크로 우회시킴으로써 해당 트래픽의 QoS를 만족시킨다. 또한 백업링크 상으로 전달되는 프레임들은 스패닝트리 상에서 플러딩되도록 함으로써 주소학습과정에 따른 지연을 최소화시키고 루프백현상도 제거할 수 있는 장점이 있다. 제안된 방식의 동작 검증을 위하여 CCM메시지에 의한 링크보호절체기능과 MAC-in-MAC 수납방법이 모두 지원되는 PBB-TE 시스템을 리눅스 브리지 기반에서 구현하였고 관련 프로토콜 분석도구도 함께 구현하였다. 제안된 방식은 기존의 링크보호방법의 백업링크 예약에 의한 큰 대역손실이나 링크장애시 백업링크를 설정하는데 소요되는 신호절차지연시간이 큰 단점을 해결할 수 있어 QoS를 지원해야 하는 대규모 사업자용 백본 브리지 시스템 구현시 활용될 수 있다.