• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.1-8
• /
• 2016

오늘날 전류센서는 전류량 제어, 감시, 계측 등 매우 다양한 분야에서 사용되고 있다. 또한 전력망의 스마트 그리드사업, 신재생에너지 발전, 전기자동차와 하이브리드 자동차 등의 수요가 커지면서 그 사용영역이 점차 확대되고 있는 추세이다. 여러 종류의 전류센서 중에서 홀 소자를 사용하는 개방형 전류센서는 다른 형식의 전류센서에 비해 가격이 싸고, 크기와 무게가 작은 장점이 있지만 정밀도가 낮고 주위의 온도 변화에 따라 특성이 변하는 것이 단점이다. 이러한 단점을 보완하기 위하여 본 연구에서는 정밀도와 온도성능이 뛰어난 300A급 개방형 전류센서를 설계 및 제작하였다. 300A급 개방형 전류센서를 제작하기 위해서 수치해석을 통해 철심을 설계하고 회로해석 프로그램을 이용하여 신호처리에 필요한 회로들을 설계하였다. 이러한 과정을 통해서 SMD(Surface Mount Device) 형태로 제작된 300A급 개방형 전류센서는 30 ~ 300A의 직류 및 교류전류를 통전한 실험에서 정밀도 오차가 0.75% 이내, 선형도 오차가 0.19% 이내였다. 또한 온도보상회로를 포함한 전류센서를 $-25{\sim}85^{\circ}C$의 온도범위에서 동작시켰을 때 온도계수는 $0.012%/^{\circ}C$ 이내였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.118-128
• /
• 2017

In this study, we propose a real time inertial navigation system/global positioning system (INS/GPS) integrated smoothing algorithm based on an extended Kalman filter (EKF) and a position damping loop (PDL) for synthetic aperture radar (SAR). Integrated navigation algorithms usually induce discontinuities due to error correction update by the Kalman filter, which are as detrimental to the performance of SAR as the relative position error. The proposed smoothing algorithm suppresses these discontinuities and also reduces the relative position error in real time. An EKF estimates the navigation errors and sensor biases, and all the errors except for the position error are corrected directly and instantly. A PDL activated during SAR operation period imposes damping effects on the position error estimates, where the estimated position error is corrected smoothly and gradually, which contributes to the real time smoothing and small relative position errors. The residual errors are re-estimated by the EKF to maintain the estimation performance and the stability of the overall loop. The performance improvements were confirmed by Monte Carlo simulations. The simulation results showed that the discontinuities were reduced by 99.8% and the relative position error by 48% compared with a conventional EKF without a smoothing loop, thereby satisfying the basic performance requirements for SAR operation. The proposed algorithm may be applicable to low cost SAR systems which use a conventional INS/GPS without changing their hardware configurations.

• 제어로봇시스템학회논문지
• /
• 제22권12호
• /
• pp.1021-1026
• /
• 2016

The graph-based SLAM (Simultaneous Localization and Mapping) approach has been gaining much attention in SLAM research recently thanks to its ability to provide better maps and full trajectory estimations when compared to the filtering-based SLAM approach. Even though graph-based SLAM requires batch processing causing it to be computationally heavy, recent advancements in optimization and computing power enable it to run fast enough to be used in real-time. However, data association problems still require large amount of computation when building a pose graph. For example, to find loop closures it is necessary to consider the whole history of the robot trajectory and sensor data within the confident range. As a pose graph grows, the number of candidates to be searched also grows. It makes searching the loop closures a bottleneck when solving the SLAM problem. Our approach to alleviate this bottleneck is to sample a limited number of pose nodes in which loop closures are searched. We propose a heuristic for sampling pose nodes that are most advantageous to closing loops by providing a way of ranking pose nodes in order of usefulness for closing loops.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.18-23
• /
• 2016

Injection molded thermoplastic parts may need to be coated to facilitate paint adhesion, or to satisfy other surface property requirements, such as appearance, durability, and weather resistance. In this paper, a two-component polyurethane metering system was developed for the simultaneous injection and surface coating of a plastic substrate. The system was composed of storage tanks, feed pumps, axial piston pumps, mixing head. The tank was designed to be double-jacket structured and fabricated for polyol and isocyanate, respectively. A temperature chamber was used to maintain the material temperature to be $80^{\circ}C$ during flowing from storage tank to mixing head. Inside the chamber, feed pump, low pressure filter, high pressure pump, high pressure filter, pressure sensor, flow meter were installed. A mixing head of L-type was used for homogeneous mixing of polyol and isocyanate. Inside the mixing head, a cartridge heater and a temperature sensor were installed to control the temperature of the materials. The flow rate of axial-piston pump was controlled by using closed-loop feedback control algorithm. The input flow-rates were compared with the measured values. The output error was 6.7% for open-loop control, whereas the error was below 2.2% for closed-loop control. In addition, the pressure generated through mixing-head nozzle increased with increasing flow rate. It was found that the pressure drop between metering pump and mixing-head nozzle was almost 10 bar.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권3호
• /
• pp.95-101
• /
• 2020

We studied the Implementation and design of inertial sensor that enables to improve performance by reduce the noise of rotor which Angle of inclination. Analyze model equation including motion equation and error, signal processing filter algorithm on high frequency bandwidth with eliminates error using estimation of error coefficient method is was designed and the prototype inertial sensor showed the pick off noise up to 0.2 mV and bias error performance of about 0.06 deg/hr by the experiments. Accordingly, we confirmed that the design of inertial sensor was valid for high rotation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.40-62
• /
• 1995

A micro positioning system using piezoelectric actuators have very wide application region such as ultra-precision machine tool optical device measurement system. In order to keep a high precision displacement resolution it to useful to take a position sensor and feedback of the error. From the practical point of view high-resolution displacement sensor systems are very expensive and it is difficult to make such a sensitive sensor work properly in a poor operational environment of industry. In this study a piezo-electric micro-depth control system which does not require position sensor but piezoelectric voltage feedback has been developed. It is driven by hysteresis-considering reference input voltage calculated in advance and actuator/sensor characteristics of piezoelectric materials. From the result of experiments a fast and stable response of micro-depth control system has been achieved and an efficient technique to control the piezoelectric actuator suggested.

• Smart Structures and Systems
• /
• 제5권3호
• /
• pp.279-290
• /
• 2009

Two degrees of freedom resonant systems are employed to improve the resonant property of resonant sensor, as compared to a single degree of freedom resonant system. This paper presents design, development and testing of two degrees of freedom resonant sensor. To measure absolute mass, cantilever shaped two different masses (smaller/absorber mass and bigger/drive mass) with identical resonant frequency are mechanically linked to form 2 - Degree-of-Freedom (DOF) resonator which exhibits higher amplitude of displacement at the smaller mass. The same concept is extended for measuring differential quantity, by having two bigger mass and one smaller mass. The main features of this work are the 3 - DOF resonator for differential detection and the microcontroller based closed loop electronics for resonant sensor with piezoelectric sensing and excitation. The advantage of using microcontroller is that the method can be easily extended for any range of measurand.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.90.6-90
• /
• 2002

An active stick which has the variable force-feel characteristics is developed. A combined position and force control strategy is mechanized using a 2-axis built-in force sensor and LVDT. The 2-axis force sensor which measures the stick force felt by the operator is developed by using strain gages and appropriate instrumental amplifiers. A mathematical model of the active stick dynamics is derived, and compared with the experimental results. The frictional torque of the stick due to the mechanical contacts of several parts makes the experimental frequency responses to be dependent on the magnitude of excitation signal, and the precision closed loop control to be difficult. A friction observe...

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.662-668
• /
• 2005

This paper presents a realization of check valve condition monitoring system based on fault diagnosis algorithm and Fieldbus communication. We first acquired AE(acoustic emission) sensor data at the check valve test loop, extract fault features through the teamed neural network, and send the processed data to a remote site. The overall system has been implemented and experimented results are given to show its effectiveness.

• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.45-50
• /
• 2015

This paper suggests the sensor-less speed control of PMSM (Permanent Magnet Synchronous Motor) without the position sensor of oil-free air compressor. It estimated d and q axis back electro motive force using Back-EMF (Electro motive Force) observer to control sensor-less speed of PMSM. Also it used the method that tracks the information of rotor position and speed using PLL (Phase Locked Loop) based on estimated d and q axis Back-EMF. The sensor-less speed control of PMSM for oil air compressor application is carried out with the introduced rotor position and speed tracking method. In this paper, the experimental characterization of the sensor-less drive is provided to verify the accuracy of the estimated position and the performance of sensor-less control is analyzed by results obtained from the experiment. Moreover, the potential of PMSM sensor-less drive in industrial application such as compressor drive is also examined.