• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.263-271
• /
• 2002

In this paper, we propose a new smoothing method for removing moire patterns using analysis of halftone patterns interference. The proposed method can determine a strength of moire patterns by using gray values of pixels and the size of smoothing mask for moire region is adjusted adaptively according to the strength of moire patterns. Therefore it can remove moire patterns effectively and preserve meaningful high frequencies well, such as edges and textures. The proposed method only refer to predefined lookup table to determine the strength of moire patterns, so it is more efficient than a previous work based on FFT of subblock. It could be applied to field of various multimedia applications that deal with color prints.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.912-921
• /
• 2015

In this paper, we introduce fuzzy inference-based real-time deterioration diagnosis system with the aid of infrared thermal imaging camera. In the proposed system, the infrared thermal imaging camera monitors diagnostic field in real time and then checks state of deterioration at the same time. Temperature and variation of temperature obtained from the infrared thermal imaging camera variation are used as input variables. In addition to perform more efficient diagnosis, fuzzy inference algorithm is applied to the proposed system, and fuzzy rule is defined by If-then form and is expressed as lookup-table. While triangular membership function is used to estimate fuzzy set of input variables, that of output variable has singleton membership function. At last, state of deterioration in the present is determined based on output obtained through defuzzification. Experimental data acquired from deterioration generator and electric machinery are used in order to evaluate performance of the proposed system. And simulator is realized in order to confirm real-time state of diagnostic field

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.574-585
• /
• 2015

This paper aims to improve the performance of conventional direct torque control (DTC) drives proposed by Takahashi by extending the idea for 5-level inverter. Hybrid cascaded H-bridge topology is used to achieve inverter voltage vector composed of 5-level of voltage. Although DTC is very popular for its simplicity but it suffers from some disadvantages like- high torque ripple and uncontrollable switching frequency. To compensate these shortcomings conventional DTC strategy is modified for five levels voltage source inverter (VSI). Multilevel hysteresis controller for both flux and torque is used. Optimal voltage vector selection from precise lookup table utilizing 12 sector, 9 torque level and 4 flux level is proposed to improve DTC performance. These voltage references are produced utilizing a hybrid cascaded H-bridge multilevel inverter, where inverter each phase can be realized using multiple dc source. Fuel cells, car batteries or ultra-capacitor are normally the choice of required dc source. Simulation results shows that the DTC drive performance is considerably improved in terms of lower torque and flux ripple and less THD. These have been experimentally evaluated and compared with the basic DTC developed by Takahashi.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1098-1103
• /
• 2014

This study deals with the development of an electrofusion welding machine that is capable of joining plastic pipes using a recently developed electrofusion fitting. This fitting has built-in conductive plastics that are used to weld the joint together as a heating element. In order to explain the mechanism of the new machine, 1) the resistance characteristics of the heating element were explained, 2) the method of electric welding that uses the electrofusion fitting was described, and 3) the method of power supply based on controlling the firing angle was explained. A control system for an intelligent electrofusion welding machine was proposed. This system has the ability to recognize the diameter of an electrofusion fitting using a lookup-table based on the difference of resistance curves according to fitting types, and it is able to weld the fittings regardless of the ambient temperature. A new algorithm was developed to control the power of electric welding through the recognition of feature points from the resistance curve of the heating element. In order to evaluate the performance of the developed welding machine, tests involving the welding of 16 mm- and 20 mm-type fittings were carried out. Examining the welding results, we concluded that the proposed welding machine will offer high productivity and reliability in the field of electrofusion welding.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.4
• /
• pp.25-34
• /
• 2012

This paper presents a real-time GPU (graphics processing unit) ray casting scheme for rendering isosurfaces of BCC (body-centered cubic) volume datasets. A quartic spline field is built using the 7-direction box-spline filter accompanied with a quasi-interpolation prefilter. To obtain an interactive rendering speed on the graphics hardware, the shader code was optimized to avoid lookup table and conditional branches and to minimize data fetch overhead. Compared to previous implementations, our work outperforms the comparable one by more than 20% and the rendering quality is superior than others.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.44-57
• /
• 2016

Rectification is used as a preprocessing to reduce the computation complexity of disparity estimation. However, rectification also requires a complex computation. To minimize the computing complexity, rectification using a lookup-table (R-LUT) has been introduced. However, since, the R-LUT consumes large amount of memory, rectification with compressed LUT (R-CLUT) has been introduced. However, the more we reduce the memory consumption, the more we need decoding overhead. Therefore, we need to attain an acceptable trade-off between the size of LUT and decoding overhead. In this paper, we present such a trade-off by adaptively combining simple coding methods, such as differential coding, modified run-length coding (MRLE), and Huffman coding. Differential coding is applied to transform coordinate data into a differential form in order to further improve the coding efficiency along with Huffman coding for better stability and MRLE for better performance. Our experimental results verified that our coding scheme yields high performance with maintaining robustness. Our method showed about ranging from 1 % to 16 % lower average inverse of compression ratio than the existing methods. Moreover, we maintained low latency with tolerable hardware overhead for real-time implementation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.492-497
• /
• 2008

최근 모바일 장치의 사용 영역 확대와 더불어 기기장치 내의 다양한 영상 데이터에 대한 효율적인 관리와 검색에 관한 기술 연구가 요구되고 있다. 그러나 모바일 장치의 낮은 CPU성능과 한정적인 메모리를 극복하기 위해 저 용량 그리고 고속의 검색 엔진 개발이 요구된다. 이 문제를 해결하기 위하여, 본 논문에서는 RGB 색상 공간에서 HSV 색상 공간 상의 36개의 특징 값으로 변환하는 검색 테이블 방법을 제안한다. 제안하는 방법에 의해, 입력 영상은 검색 테이블에 기반하여 빠르게 색상과 위치에 대한 두개의 특징 히스토그램으로 변환된다. 여기서, 특징추출에 필요한 연산은 본 논문의 실험 결과에서 보는 바와 같이 매우 낮다. 제안하는 방법을 이용하여, 우리는 영상, 색상 그리고 블랍에 의한 질의가 가능한 모바일 기반 영상 검색 시스템을 구현하였다. 본 논문에서 제시하는 실험결과는 제안하는 방법이 충분히 모바일에서 운용 가능한 가볍고 빠른 방법임을 알 수 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.423-428
• /
• 2005

This paper proposes a new edge detection method using a $3{\times}3$ ideal binary pattern and lookup table (LUT) for the mobile robot localization without any parameter adjustments. We take the mean of the pixels within the $3{\times}3$ block as a threshold by which the pixels are divided into two groups. The edge magnitude and orientation are calculated by taking the difference of average intensities of the two groups and by searching directional code in the LUT, respectively. And also the input image is not only partitioned into multiple groups according to their intensity similarities by the histogram, but also the threshold of each group is determined by fuzzy reasoning automatically. Finally, the edges are determined through non-maximum suppression using edge confidence measure and edge linking. Applying this edge detection method to the mobile robot localization using projective invariance of the cross ratio. we demonstrate the robustness of the proposed method to the illumination changes in a corridor environment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.5
• /
• pp.297-305
• /
• 2015

AFLS (Adaptive front lighting System) is being applied to improve safety in driving automotive at night. Safe embedded system for controlling head-lamp has to be tightly designed by considering safety requirement of hardware-dependent software, which is embedded in automotive ECU(Electronic Control Unit) hardware under severe environmental noise. In this paper, we propose an adaptive headlight controller with newly-designed symmetric angle sensor compensator, which is integrated with ECU-based adaptive front light system. The proposed system, on which additional backup hardware and emergency control algorithm are integrated, effectively detects abnormal situation and restore safe status of controlling the light-angle in AFLS operations by comparing result in symmetric angle sensor. The controlled angle value is traced into internal memory in runtime and will be continuously compared with the pre-defined lookup table (LUT) with symmetric angle value, which is used in normal operation. The watch-dog concept, which is based on using angle sensor and control-value tracer, enables quick response to restore safe light-controlling state by performing the backup sequence in emergency situation.

• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.330-338
• /
• 2006

Many web cache systems and policies concerning them have been proposed. These studies, however, consider large objects less useful than small objects in terms of performance, and evict them as soon as possible. Even if this approach increases the hit rate, the byte hit rate decreases and the connections occurring over congested links to outside networks waste more bandwidth in obtaining large objects. This paper puts forth a client-cluster approach for improving the web cache system. The client-cluster is composed of the residual resources of clients and utilizes them as exclusive storage for large objects. This proposed system achieves not only a high hit rate but also a high byte hit rate, while reducing outgoing traffic. The distributed hash table (DHT) based peer-to-peer lookup protocol is utilized to manage the client-cluster. With the natural characteristics of this protocol, the proposed system with the client-cluster is self-organizing, fault-tolerant, well-balanced, and scalable. Additionally, the large objects are managed with an index based allocation method, which balances the loads of all clients well. The performance of the cache system is examined via a trace driven simulation and an effective enhancement of the proxy cache performance is demonstrated.