• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.876-882
• /
• 1999

It is difficult to determine the feeding rate of coagulant in the water treatment process, due to nonlinearity, multivariables and slow response characteristics, etc. To deal with this difficulty, the genetic-fuzzy system was used in determining the feeding rate of the coagulant. The genetic algorithms are excellently robust in complex optimization problems. Since it uses randomized operators and searches for the best chromosome without auxiliary informations from a population consists of codings of parameter set. To apply this algorithms, we made the lookup table and membership function from the actual operation data of the water treatment process. We determined optimum dosages of coagulant(LAS) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.27-33
• /
• 1993

This paper describes the hardware implementation of 2-D FIR digital filter for a real-time image processing. Generally, the most time-consuming operation in signal processing is the multiplication operation. To avoid it in digital filter. Pelid and Liu proposed the distributed arithmetic method for the one-dimensional case. The implementation method proposed in this paper is to extend Pelid's method to two-dimensional FIR filter using simple ROM lookup table and to use the technique of pipe lining two main operations of memory access and arithmetic. As a result, the speed of our proposed hardware implementation is two times faster than that of conventional methods and can be close to the real time speed.

• Journal of Power Electronics
• /
• 제7권1호
• /
• pp.81-88
• /
• 2007

This paper presents a new approach to the automatic control of the turn-off angle used to excite the Switched Reluctance Motor (SRM) employed in electric vehicles (EV). The controller selects the turn-off angle that supports and improves the performance of the motor drive system. This control scheme consisting of classical current control and speed control depends on a lookup table to take the best result of the motor. The turn-on angle of the main switches of the inverter is fixed at $0^{\circ}C$ and the turn-off angle is variable depending on the reference speed. The motor, inverter and control system are modeled in Simulink to demonstrate the operation of the system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.281-284
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by YCbCr Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 34.6 msec on $720{\times}480$ curved image at 150 degree visual range.

• 센서학회지
• /
• 제15권1호
• /
• pp.7-12
• /
• 2006

The multi-functional one-chip sensor has been fabricated to reduce output variation under various water environment. There were a temperature sensor, a piezoresistive type pressure sensor, and a electrode type conductivity sensor in the fabricated one-chip sensor. This sensor was measured water depth in the range of $0{\sim}180cm$, temperature in the range of $0{\sim}50^{\circ}C$, and salinity in the range of 0 $0wt%{\sim}5wt%$, respectively. Since the change of water depth in solution environment depends on various factors such as salinity, latitude, temperature, and atmospheric pressure, the water depth sensor is needed to be compensated. We tried to compensate the salinity and temperature dependence for the pressure in water by using lookup-table method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.659-662
• /
• 2005

This paper presents a new technology, Advanced Dynamic Capacitance Compensation (A-DCC), for improved dynamic performance of LCD monitors. Conventional LCD monitors suffer from certain specific artifacts, such as wire-frame flicker and line dimming, which are not an issue for the simpler motion images found in television content. A-DCC addresses these more challenging monitor cases through an advanced architecture which analyzes multi-frame data and applies more comprehensive lookup table corrections according to the specific frame sequence.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.279-280
• /
• 2006

This paper describes a method for reconstructing 3D feet in a real time vision based marker free motion capture system. The proposed method is developed based on the visual hull and model fitting. For a real time computing, a special lookup table is employed in this paper. This method is implemented and tested using three CCD cameras and preliminary results are presented in this paper.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.66-73
• /
• 2008

This paper presents a position sensorless control system of SRM over wide speed range. Due to the doubly salient structure of the SRM, the phase inductance varies along with the rotor position. Most of the sensorless control techniques are based on the fact that the magnetic status of the SRM is a function of the angular rotor position. The rotor position estimation of the SRM is somewhat difficult because of its highly nonlinear magnetizing characteristics. In order to estimate more accurate rotor position over wide speed range, Neural Network is used for this highly nonlinear function approximation. Magnetizing data patterns of the prototype 1-hp SRM are obtained from locked rotor test, and used for the Neural Network training data set. Through measurement of the flux-linkage and phase currents, rotor position is able to estimate from current-flux-rotor position lookup table which is constructed from trained Neural Network. Experimental results for a 1-hp SRM over 16:1 speed range are presented for the verification of the proposed sensorless control algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.431-432
• /
• 2007

본 연구에서는 영상의 잡음 제거에 우수한 평균화 필터 알고리즘을 SIMD(Single Instruction Multiple Data) 명령어를 이용하여 고속화하였다. 먼저 순차 알고리즘의 속도 향상을 위한 최적화를 수행하고, SIMD에 적합 하도록 변환 하여 4 또는 16 개의 데이터를 동시에 연산이 가능하도록 하였다. 또한 나누기 연산을 줄이기 위하여 8비트의 데이터 타입과 함께 룩업 테이블(Lookup Table)을 이용하였다. 각각의 데이터 타입에 적합하게 알고리즘을 변환하여 비교하였고 실험을 통하여 기존의 순차 처리방식에 비해 평균적으로 2.5배 이상의 속도 향상을 보았다.