• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.83-88
• /
• 2000

In machining large screws such as those of extruders, it takes long time to machine them on conventional machines which usually use single-tipped fixed tools. And it is also difficult to use an existing CAD/CAM coftware when trying to get over the problems of conventional machines and making use of CNC machines. In this paper, generation of machining program using rotational tools for large screws defined by longitudinal-section profile is descrebed. Use of rotational tools in machining plays an important role in saving machining time. In the sort of extruder screws, it is easy to define a screw shape by longitudinal-section profile, and by which improvement of dimensional accuracy can be expected. The CAM software developed in this paper is based on user's and designer's friendliness.

• 소성∙가공
• /
• 제23권6호
• /
• pp.369-375
• /
• 2014

Flexible roll forming allows profiles to have variable cross-sections. However, the profile may have some shape errors, such as, warping which is a major defect. The shape error is induced by geometrical deviations in both the concave zone and the convex zone. In the current study, flexible roll forming was modeled with FE simulations to analyze the shape error and the longitudinal strain distribution along the flange section over the profile. A distribution of analytically calculated longitudinal strains was used to develop relationships between the shape error and the longitudinal strain distribution as a function of the defined shape parameters for the profile. The FE simulations showed that the shape error is primarily affected by the deviations between the distribution of analytically calculated longitudinal strain and the longitudinal strain distribution of the profile. The results show that the shape error can be controlled by designing the shape parameters to control the geometrical deviations at the flange section in the transition zones.

• 소성∙가공
• /
• 제22권7호
• /
• pp.401-406
• /
• 2013

The use of roll-formed products increases every year due to its advantages, such as high production rates, reduced tooling cost and improved quality. However, till now, it is limited to part profiles with constant cross section. In recent years, the flexible roll forming process, which allows variable cross sections of profiles by adaptive roll stands, was developed. In this study, an attempt to optimize profile design for the flexible roll forming process was performed. An equation that predicts the longitudinal strain for part geometries with variable cross-sections was proposed. The relationship between geometrical parameters and the longitudinal strain was analyzed and investigations on the optimal profile design were performed. Experiments were conducted with a lab-scale roll forming machine to validate the proposed equation. The results show that the profile design method proposed in this study is feasible and parts with variable cross sections can be successfully fabricated with the flexible roll forming process.

• 설비공학논문집
• /
• 제11권5호
• /
• pp.561-569
• /
• 1999

The effects of longitudinal heat conduction on the performance of heat transfer surfaces are investigated by using a single-blow method. In the transient testing method for determining the heat transfer characteristics, exponential inlet temperature variations are made by using screen-mesh heater with small time constant and low frontal velocities of the test section, and the experimentally determined inlet temperature profile is used as the inlet fluid temperature condition. The effects of longitudinal heat conduction are negligible only if $\gamma^\act<0.05\;and \;N_{tu}\le3$ and should be considered if $N_{tu}\le3$ The test results ate compared with the existing theoretical and experimental data and the validity of this technique is confirmed by the good agreement.

• Journal of the Korean Wood Science and Technology
• /
• 제28권2호
• /
• pp.19-24
• /
• 2000

본 논문에서는 목재시편의 횡단연적과 수분경사가 라디에타파인 심재와 번재의 초음파 전달속도에 미치는 효과를 조사하였다. 각 수분경사 모델시편은 함수율이 다른 다섯 개의 소편을 배합하여 만들었다. 횡단면적이 작아질수록 초음파 전달속도는 심재와 변재 모두 4~8% 감소하였다. 수분경사 모델시편을 투과한 초음파 신호를 분석한 결과, 횡단면적이 클수록 저주파 신호가 고주파 신호보다 분명한 주류률 이루었다. 평균 함수율이 같더라도 수분경사가 다르면 시편의 초음파 전달속도는 다르게 나타났다. 초음파 전달속도와 수분경사 모델시편의 내층 평균 함수율의 분포는 함수율에 따라 세 가지 서로 다른 형태를 나타냄이 밝혀졌다.

• Journal of the Optical Society of Korea
• /
• 제6권3호
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.53-59
• /
• 2019

민감 상품의 화물 운송 중 발생하는 진동 및 충격의 저감을 위하여 본 연구에서는 실제 트럭과 화차에 진동센서가 부착된 컨테이너를 이용하여 운송 경로에 따른 진동이력을 측정하였다. 컨테이너 내부 바닥 2개소에 3축 방향(길이, 횡, 수직 방향)으로 가속도센서를 부착하여 트럭운송 구간(아산-의왕)과 화물열차 운송 구간(의왕-부산)에 대하여 진동이력을 측정하였다. ASTM D-4169에서 제안된 철도 진동 프로파일(0.29_Grms)은 트럭 진동 프로파일(0.54_Grms) 대비 약 50% 수준으로 낮다. 국내 화물 컨테이너 운송 동안 ASTM D-4169에 준한 진동 프로파일과 비교한 결과는 다음과 같다. 트럭 운송 구간에서의 길이방향과 횡 방향 진동 수준은 모두 ASTM의 트럭운송 진동 프로파일보다 길이방향 약 16%, 횡 방향 약 33% 수준으로 전반적으로 낮게 나타난 반면에, 수직방향 진동은 4~15Hz와 60Hz 이상 범위에서 ASTM의 트럭운송 진동 프로파일을 부분적으로 초과하였다. 화물열차 진동 측정이력은 도로와 유사하며, 길이방향과 횡방향의 진동측정이력은 ASTM D-4169의 철도 진동 프로파일보다 낮으며, 반대로 수직방향의 이력은 30Hz이상 범위에서 초과하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.449-455
• /
• 2009

A reversible axial flow fan called jet fan has been widely used for longitudinal ventilation in road tunnels to secure a safe and comfortable environment cost-effectively. As shifting the flow direction is usually made by only switching the rotational direction of an electric motor due to heavy duty, rotor blades having identical aerodynamic performance for bidirectional flow should be necessary. However, such aerodynamically desirable blades haven't been developed sufficiently, since most of the related studies have been done from the viewpoint of unidirectional flow. In the present paper, we demonstrate a method to profile the blade section suitable for bidirectional flow, which is validated by studying the aerodynamic performances of rotor blades of a two-stage jet fan experimentally and numerically.

• 한국표면공학회지
• /
• 제27권3호
• /
• pp.158-165
• /
• 1994

Cu-Cr alloy thin film requires good quality of etching be used for TAB technology. The etched cross sec-tion was clean enough when the etching was performed in 0.1M $FeCl_3$ solution at $50^{\circ}C$. The etching rate was increased with the amount of $KMnO_4$. For enhanced profile of cross section and rate, the spray etchning was found to be superior compared to the immersion etching. A series of experiments were performed to improve the uniformity of the current distribution in electrodeposition onto the substrate with lithographic patterns. Copper was electrodeposited from quiescent-solution, paddle-agitated-solution, and air-bubbled-solution to in-vestigate the effect of the fluid flow. The thickness profile of the specimen measured by profilmetry has the non uniformity at feature scale in quiescent-solution, because of the longitudinal vortex roll caused by the natural convection. However, uniform thickness profile was achieved in paddle-agitated or air bubbled solu-tion.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.146-153
• /
• 2005

Structural design of the torsion beam rear suspension is investigated by calculating warping of the torsion beam. Since the longitudinal displacement in the cross section of the torsion beam due to torsional moment causes normal stress across the beam restrained from outside at both ends, the profile of torsion beam needs to be designed considering the warping. Warping function of the beam is derived with the parameters of cross section fur the arbitrary shapes of torsion beam profiles assuming thin-walled open section. From comparing the warping calculated for two different beam profiles, the design method for the torsion beam in the view point of low stress is discussed. It is shown that the gusset used to reinforce the torsion beam can be optimized in accordance with warping shape. The method to fix the end point of the gusset is proposed to minimize the stress concentrated on the end point of the gusset produced during torsional moment. The result from finite element analysis shows the stress is minimized when the height of gusset end point is coincident with the point where warping of the beam is minimized.