• Multiscale and Multiphysics Mechanics
• /
• 제1권3호
• /
• pp.261-270
• /
• 2016

The longitudinal velocity (forward speed) having significant importance in proper running of railway wheelset on track, depends greatly upon the adhesion ratio and creep analysis by implementation of suitable dynamic system on contamination. The wet track condition causes slip and slide of vehicle on railway tracking, whereas high speed may also increase slip and skidding to severe wear and deterioration of mechanical parts. The basic aim of this research is to design appropriate model aimed estimator that can be used to control railway vehicle forward velocity to avoid slip. For the filtration of disturbance procured during running of vehicle, the kalman filter is applied to estimate the actual signal on preferered samples of creep co-efficient for observing the applied attitude of noise. Thus error level is detected on higher and lower co-efficient of creep to analyze adhesion to avoid slip and sliding. The skidding is usually occurred due to higher forward speed owing to procured disturbance. This paper guides to minimize the noise and error based upon creep coefficient.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.803-812
• /
• 2006

In order to reduce the negative effects of dynamic coupling among vehicle subsystems and improve the handling performance of vehicle under severe driving conditions, a vehicle chassis control integration approach based on a main-loop and servo-loop structure is proposed. In the main-loop, in order to achieve satisfactory longitudinal, lateral and yaw response, a sliding mode controller is used to calculate the desired longitudinal, lateral forces and yaw moment of the vehicle; and in the servo-loop, a nonlinear optimizing method is adopted to compute the optimal control inputs, i.e. wheel control torques and active steering angles, and thus distributes the forces and moment to four tire/road contact patches. Simulation results indicate that significant improvement in vehicle handling and stability can be expected from the proposed chassis control integration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.110-110
• /
• 2000

In this paper, an antilock brake system (ABS) for commercial vehicles is studied by considering the design of a fuzzy Logic controller with pulse width modulation (PWM). PWM method is used for generating solenoid valve inputs in order to cope with the chattering problem caused by the conventional on/off control The sliding mode observer is designed to estimate the vehicle longitudinal velocity and it is used to calculate the wheel slip ratio. The effectiveness of the proposed control algorithm was validated by simulations performed with a nonlinear 14-DOF vehicle model including the dynamics of the brakes.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.731-738
• /
• 2013

본 논문은 6 륜 독립구동/독립조향 차량의 독립 스티어-바이-와이어 장치의 고장 안전 주행 제어방법을 제시하였다. 조향부 고장 휠의 횡방향 타이어 힘이 차량 선회 운동에 저항력으로 작용할 수 있으므로, 이를 줄이기 위하여 본 고장 안전 주행 제어 알고리즘은 조향부 고장 휠에 높은 슬립률이 발생하도록 토크 입력을 가한다. 고슬립으로 인한 조향부 고장 휠의 종방향 타이어 힘 증가를 고려하기 위하여 종방향 타이어 힘을 추정하여 고장나지 않은 휠의 구동력 최적 분배에 구속 조건에 포함시킨다. 개루프 조향 및 폐루프 조향 시뮬레이션 결과 조향부 고장이 발생한 차량의 주행시 고장을 고려하지 않은 최적 구동력 분배 제어에 비하여 본 알고리즘 적용시 차량의 주행 성능이 보정됨을 확인하였다.