• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.129-136
• /
• 2004

Recently, instead of a matched die forming method requiring a high cost and long delivery term, a multi-point dieless forming method using a pair of matrix type punch array as flexible dies has been developed. Since the conventional multi-point dieless forming method has some disadvantages of difficulty in precise punch control and high-cost of equipment, a new concept of multi-point dieless forming method combined with an elasto-forming method has been suggested in this study. For optimal selection of elastomers, compression tests of rubbers, polyethylene and foams were carried out together with FEM analysis of the deformation behavior during sheet forming process using a rigid punch and elastomers. Compressive strain was concentrated on the upper central area of the elastomer under the punch, and the rubber exhibited higher concentration of the compressive strain than foams. Two-dimensional curved surface was formed successfully by the multi-point elasto-dieless forming method using an optimal combination of rubber and foam materials.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.473-479
• /
• 1996

Until now, we assumed in the time-dependent analysis of concrete structure that tensile creep has same characteristics as compressive creep has. But, in according to results of researches, it appears that tensile creep is different from compressive creep in quantity and in mechanics because tensile creep is affected significantly by micro cracking. The test results indicate that the creep behavior of concrete in compression and tension is rather different. The test data shows that the amount of creep under tensile loading is larger than that under compressive loading. In this paper, a realistic tensile creep model is suggested and incorporated in the formulation. In order to get more accurate results of time-dependent analysis. The present study indicates that the long-term deflection of concrete structures under realistic tensile creep model is somewhat larger than that under ordinary compressive creep model.

• Structural Engineering and Mechanics
• /
• v.17 no.1
• /
• pp.15-27
• /
• 2004

A rational and simple analytical model to predict the time varying cracking moment of reinforced concrete sections under sustained loading is developed. The modeling procedure is based on equilibrium and compatibility requirements and takes into account the interdependent effects of creep and shrinkage as well as the presence of axial loading. A parametric study is conducted in which particular consideration is given to the effects of reinforcement ratio, level of loading, and creep and shrinkage characteristics of concrete. It is concluded that the reduction in cracking moment is mainly attributed to shrinkage. The effect of shrinkage is more pronounced at low levels of sustained loading and at high reinforcement ratios. This effect is lessened by the compression steel and creep particularly when the applied moment is near the cracking moment.

• Food Science and Preservation
• /
• v.5 no.2
• /
• pp.162-166
• /
• 1998

Chemical, physical md microbial analysis of salted baechu(Chinese cabbage) and its exudate were conducted during storage in large plastic bags(LDPE, HDPE, PVC-box) at 0$^{\circ}C$. Salinity was slightly lowered for 2 weeks storage and maintained that level thereafter in salted haechu, but in its exudate increased rapidly for 2 weeks storage and decreased thereafter. In all treatment pH decreased to 5.0 in salted baechu and to 4.5 in its exudate for 6 weeks storage. Reducing sugar content of salted baechu was 1.5∼2.0 fold higher than that of its exudate, and decresed slowly in both. Total viable cells increased rapidly for 2 weeks but maintained that level thereafter and lactic acid bacteria increased continuously until 6 weeks. Lightness of exudate decreased rapidly in PVC-box, but decreased slowly in LDPE. Compression force of salted baechu increased continuously untill 8 weeks except for PVC-box.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.56-57
• /
• 2013

In this study, in regard to concrete considering variety of admixture content rate, we evaluated property of adiabatic temperature rise. By setting up high temperature history, we evaluated effect to compression strength property of high strength concrete by early high temperature history. As a result, early high temperature history accelerated Hydration reaction of cement and contribute early strength development but it didn't accomplish performance objective in long-term aged.

• Geotechnical Engineering
• /
• v.10 no.4
• /
• pp.167-180
• /
• 1994

A series of long term consolidation tests were conducted under loading -unloading and loading(pc) -unloading(p.) -reloading(p,) conditions using reconstituted clay in order to investigate the effect of stress history on secondary consolidation characteristics and the applicability of the secondary consolidation model suggested by Bjerrum to overconsolidated clays. According to the test results, the secondary compression settlement affected by the stress history in the first half of experimental period and the coefficient of secondary compression, C‥‥ is dependent on overconsolidation ratio, OCR(p,1 p.), maBium OCR (p./p.), and unloading duration time. Moreover the coefficient of secondary consolidation in the latter half of experimental period Cn is mainly affected by OCR and it gradually reduces with OCR increment. Finally the comparison of the experimental results with the Bjerrum model indicates that the Bjerrum model can be applied beyond certain range of stress history in the overconsolidated clay.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4875-4883
• /
• 2016

Background and objective: Breast cancer-related lymphoedema (BCRL) is a disabling complication with long term impact on quality on life after breast cancer treatment. Its management remains a major challenge for patients and health care professionals; the goal of this overview was to summarize effects of different treatment strategies for patients with BCRL. Methods: A thorough search was undertaken to allow a systematic review or meta-analysis of treatments for BCRL. Two investigators independently selected studies and abstracted the data. Results: Combined physical therapy (CPT) with different combinations of surgery, oral pharmaceuticals, low-level laser therapy, weight reduction, mesenchymal stem cell therapy, kinesio tex taping, and acupuncture might be effective in reducing lymphoedema, but exercise demonstrated no obvious benefit. The results of direct comparisons showed CPT might be more effective than standard physiotherapy (ST). Manual lymphatic drainage (MLD) may not offer additional benefits to ST for swelling reduction, but could facilitate compression bandaging. MLD seemed to have similar effects with self-administered simple lymphatic drainage (SLD) or using an intermittent pneumatic compression pump (IPC). IPC might also not be associated with additional effectiveness for CPT. Efficacy of stem cell therapy vs. compression sleeve or CPT, as well as the effects of daflon and coumarin could not be established. Conclusion: Although many treatments for BCRL might reduce lymphoedema volume, their effects were not well established. The quality of many of the original studies in the included reviews was not optimal, so that in future randomized control trials are a high priority.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.267-274
• /
• 2005

This paper presents the fabrication of surface acoustic wave (SAW)-based pressure sensor for long-term stable mechanical compression force measurement. SAW pressure sensor has many attractive features for practical pressure measurement: no battery requirement, wireless pressure detection especially at hazardous environments, and easy other functionality integrations such as temperature, humidity, and RFID. A $41^{\circ}$ YX $LiNbO_3$ piezoelectric substrate was used because of its high SAW propagation velocity and large values of electromechanical coupling factors $K^2$. A silicon substrate with $\~200{\mu}m$ deep cavity was bonded to the diaphragm with epoxy, in which gold was covered all over the inner cavity in order to confine electromagnetic energy inside the sensor, and provide good isolation of the device from its environment. The reflection coefficient $S_{11}$ was measured using network analyzer. High S/N ratio, sharp reflected peaks, and clear separation between the peaks were observed. As a mechanical compression force was applied to the diaphragm from top with extremely sharp object, the diaphragm was bended, resulting in the phase shifts of the reflected peaks. The phase shifts were modulated depending on the amount of applied mechanical compression force. The measured $S_{11}$ results showed a good agreement with simulated results obtained from equivalent admittance circuit modeling.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.5
• /
• pp.357-363
• /
• 2005

Objective: The microvascular decompression(MVD) for trigeminal neuralgia(TN) is known as an effective surgical technique. But the failed MVD cases have been reported in long term follow-up studies. This study is to evaluate the efficacy of MVD through our operative techniques, offending vessels in operative field, failed cases with the review of the literatures. Methods: We analyzed total 63 cases of TN which underwent MVD from 1955 to 2003 according to characters of pain, operative findings, operative results related to causative vessel compression and operative method, progonotic factor. Statistical analysis was performed using paired t-test with SPSS Ver 11.0. Results: In TN, the most common offending vessel was superior cerebellar artery(45.0%). In compression group of nerve root by offending vessel, the cure rate was 91.7%. However, the cure rate of the contact group was 64.7% and the cure rate of the negative group was 37.5%. There was no statistical significance between the degree of compression by vessel and the operative result(p=0.076). In 51 cases with MVD only, the cure rate was 84.3% and in 3 cases with PSR only, 42.8% and in 2 cases with PSR(partial sensory rhizotomy) with MVD, 50.0%. TN recurred in 7 cases within the follow-up period and reoperations(PSR) were added in 2 cases of them. Conclusion: This study shows that MVD provided a high rate of success with a minor risk of complications, which has been regarded as the most safe and effective procedure for trigeminal neuralgia. Additional MVD in recurred TN by severe adhesion of teflon showed poor outcome. But, revisional operation(PSR) in recurred TN showed relatively good outcome. PSR should be considered for treatment of recurrent TN after MVD.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.870-878
• /
• 2019

In this paper, we propose an Attention-based BLSTM for predicting the video compression standard of a video. Recently, in NLP, many researches have been studied to predict the next word of sentences, classify and translate sentences by their semantics using the structure of RNN, and they were commercialized as chatbots, AI speakers and translator applications, etc. LSTM is designed to solve the gradient vanishing problem in RNN, and is used in NLP. The proposed algorithm makes video compression standard prediction possible by applying BLSTM and Attention algorithm which focuses on the most important word in a sentence to a bitstream of a video, not an sentence of a natural language.