• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.248-253
• /
• 2000

This paper presents parametric study of long-rod penetration. Influences of yield stress of penetrator and target material on the penetration results such as crater size and penetrator residual length are contemplated. Numerical experiments are carried out with varying the value of static yield stress of materials. Lagrangian explicit code NET2D was used to perform parametric study. Element eroding algorithm was used to properly simulate long-rod penetration. Analytic and empirical model of long-rod penetration and Taylor test are used to explain the relationships of parameter and simulation results.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.573-583
• /
• 1994

In this study, the shock characteristics for high velocity impact phenomena during the initial shock state by the long rod penetrator are calculated. From these results we re-analyze the one-dimensional hydrodynamic penetration theory by introducing the effective area ratio calculated from the mushroomed strain which is dependent on impact velocity. Calculated penetration depth and mushroomed strain show good agreement with high velocity impact experimental data. In addition we visualize the shock wave propagation in a transparent acryle block.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1759-1772
• /
• 1994

In this study, we re-examined the Tate's modified Bernoulli equation to study penetration phenomena for long rod projectile into single or multi-layered finite thickness plates. We used the force equlibrium equation at mushroomed nose/target interface instead of conventional pressure equation at the stagnation point. In our penetration model, we considered the velocity dependent $R_t$ value for semi-infinite target and considered only the back face effect for finite target. To compensate for $R_t$ value according to target's thickness and back face effect, we used the spherical cavity expansion theory for semi-infinite plate and used the cylindrical cavity expansion theory for finite plate. Also we developed the experimental technique using make screen to measure the penetration duration time at each layered plate. In 3-layered laminated RHA/mild steel/ A1 7039 plate, we observed that spall had occured around the back face of A1 7039 plate by the stress wave interaction. Through the comparison between theoretical and experimental data including Lambert's results, we conform that our study has good confidences.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1426-1437
• /
• 2002

Using the Lagrangian explicit time-integration finite element code NET3D which can treat three-dimensional high-velocity impact problems, oblique penetration processes of long rod projectile with yaw against thin plate are simulated. Through the comparison of simulation result with experimental result and other code's computational result, the adaptability and accuracy of NET3D is evaluated under the complex situation in which yaw angle and oblique angle exist simultaneously. Main research contents to be handled in this paper include the followings. First, the accuracy and efficiency estimation of NET3D code result obtained from the oblique penetration simulations of long rod projectile with yaw against thin plate. Second, the effect of increasing impact velocity. Third, the effect of initial yaw for the spaced-plate target. Residual velocities, residual lengths, angular velocities, and final deformed configurations obtained from the NET3D computations are compared with the experimental results and other code's computational results such as Eulerian code MESA and Lagrangian code EPIC. As a result of comparisons, it has been found that NET3D code is superior to EPIC code and MESA code in the prediction capability of residual velocity and residual length of penetrator. The key features obtained from the experiment can be successfully reproduced through NET3D simulations. Throughout the study, the applicability and accuracy of NET3D as a metallic armor system design tool is verified.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.384-392
• /
• 2017

A linear explosively formed penetrator(LEFP) is a modification of the explosively formed penetrator(EFP). An EFP is axisymmetric and has a dish-shaped liner while LEFP has a rectangular-shaped liner with curved cross section. Upon detonating LEFP forms laterally wide projectile like blade, leaving a long penetration hole on the target. On the other hand, a long-rod tungsten heavy alloy(WHA) penetrator is one of the major threats against most of the ground armored vehicles. In this paper, the feasibility of using an LEFP in protecting against a long-rod WHA penetrator by colliding LEFP into the threat was investigated through a set of numerical simulations. In this study, a scale-down WHA penetrator with length to diameter ratio(L/D) of 10.7 and 7.0 mm diameter was used to represent a long-rod WHA penetrator. LS-DYNA and Multi-Material ALE technique were employed for the simulation. For estimation of the protection effect by LEFP, residual penetration depths into RHA by the threat were compared according to various impact locations against the threat.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.5-13
• /
• 2005

The impact of a long-rod penetrator into oblique plates with combined obliquity and yaw is investigated. The study was done using a newly developed three dimensional dynamic and impact analysis code, which uses the explicit finite element method. Through the comparison of simulation result with experimental result and other code's result, the adaptability and accuracy of the developed code is evaluated under the complex situation in which yaw angle and oblique angle exist simultaneously. As a result of comparison, it has found that deformed shape, residual length and velocity, rotational velocity of long-rod show good agreement with experimental data. Through this study, the applicability and accuracy of the code as a metallic armour system design tool is verified.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.297-304
• /
• 2016

세라믹(AD-90 alumina, $B_4C$) 타일이 삽입된 금속 블록(4340-steel)에 텅스텐 합금(tungsten alloy)의 긴 운동에너지탄을 수직 고속 충돌시키는 수치해석을 수행하였다. 본 연구를 수행하기에 앞서 두 가지의 반무한판 충돌 모델의 침투 깊이에 대해서 검증을 하였다. 세라믹 재료는 JH-2 (Johnson-Holmquist) 모델을 적용하였고 계산된 침투 깊이를 실험값과 비교하여 만족할만한 결과를 얻었다. 앞서 언급한 판에 대해서 세라믹 타일의 세 가지 두께별로 금속판에 삽입된 위치를 다르게 하여 충돌 시뮬레이션을 수행하였다. 긴 관통자의 잔류속도, 잔류질량 그리고 잔류운동에너지를 얻어 세라믹 타일의 위치가 구조물의 방호 성능에 어떠한 영향을 미치는지 알아보았다. 그리고 단순 금속 블록 대비 세라믹 타일을 사용하는 경우의 질량 효율이 어떻게 되는지 확인해보았다. 마지막으로 이들을 토대로 질량효율 관점에서 최적 방호구조에 대한 평가를 수행하였다.

• 보존과학회지
• /
• 제7권2호
• /
• pp.60-67
• /
• 1998

본 연구는 붕산염 막대(borate rod)를 이용한 고건축물 부재의 부후 구제처리에 대한 기초 연구로서, 소나무와 잣나무에서 붕산염 막대로부터 붕소의 확산시 목재 함수율과 확산기간의 영향을 조사하고자 수행하였다. 함수율이 15, 25, 40%로 조성된 목재 시험편에 1,000 mg의 붕산염 막대를 삽입한 후 상온에서 2, 4, 8, 12주간 확산시키고 붕소 성분의 수축 및 횡단방향 확산정도를 평가하였다. 붕소의 원활한 확산을 위해서는 적어도 섬유포화점 이상의 목재 함수율이 요구되었으며, 또한 확산기간의 연장될수록 붕소의 확산 정도가 증가하였다. 붕소 확산의 이방성이 관찰 되었는데, 수축방향 확산이 횡단방향보다 훨씬 우수하였으며 횡단방향에서는 방사방향 확산이 접선방향보다 우수하였다. 동일 함수율과 확산기간의 조합에서도 확산 정도는 수종간에 조금씩 상이하였는데, 모든 방향에서 잣나무를 통한 확산이 가장 용이하였다. 소나무 심재를 통한 수축방향 확산이 변재를 통한 확산보다 용이하였으며, 횡단방향 확산의 경우는 큰 차이는 없었으나 변재를 통한 확산이 심재를 통한 확산보다 약간 양호하였다. 함수율 40%와 확산기간이 12주인 시험편에 대한 결과를 기준으로 할 때, 붕산염 막대의 수축방향 적정 처리간격은 소나무 심재와 잣나무 심재의 경우는 약 120 mm, 소나무 변재의 경우는 60 mm이고, 횡단방향은 수종에 관계없이 공히 약 30 mm이었다. 그러나 보다 정확한 붕산염 막대의 적정 처리간격을 구명하기 위해서는 앞으로 붕산염 막대의 크기와 장기 확산저장이 붕소 성분의 확산에 미치는 영향에 대한 보다 심도 있는 연구가 필요하다고 생각된다.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.752-757
• /
• 2017

새로운 공정으로 제작한 금속판재(MMC)가 운동에너지탄을 막는 부가방호구조로 적용가능성을 확인하기 위해 고속충돌시험 및 수치계산으로 평가연구를 수행하였다. 충돌속도는 1.3 km/s 이상에서 우선적으로 수직충돌상황만 고려하였다. 연강의 반무한판에 대한 침투깊이를 기준값으로 설정하고 새로운 부가장갑을 설치하는 경우에 대해 침투깊이 및 질량효율을 비교 검토하였다. MMC판재의 제작은 한국재료연구소에서 이루어졌으며, 이 재료에 대한 고속변형 물성은 포항공과대학에서 수행되었다. 결과는 다음과 같이 요약된다. (1) 연강 반무한판에 세라믹 판재를 부가하는 것만으로도 방호성능 감소 없이 중량이득이 나타난다. (2) 세라믹 판재 앞뒷면에 연성의 금속을 추가 부가하면 중량 증대 없이도 방호성능은 다소 증가하였다. 이는 세라믹을 감싸는 효과가 일부 나타난 것으로 판단된다. (3) 세라믹 판재 앞뒷면에 부가된 연성의 금속을 MMC로 변경한 경우 방호성능 감소 없이 방호성능이 추가적으로 다소 증대되었다. 이것은 단순 연성의 금속보다는 연성과 취성을 모두 지니는 MMC가 바람직한 역할을 수행하였다고 보인다. 즉 세라믹을 감싸는 encapsule 효과 및 탄 저지력이 우수한 세라믹의 취성이 동시에 나타남을 의미한다. (4) 마지막으로 현재의 자료만으로는 강화재로 SiC와 B4C중에 우열을 가리기에는 미소한 차이만 발생하기에 부족함이 있다.

• 복식문화연구
• /
• 제3권2호
• /
• pp.241-260
• /
• 1995

The Maori's traditional clothing materials, basic forms of dress, and the pattern and technique of tatoo were examined in the present study in order to deepen the appreciation of the cultural heritage of the Maori. The research method employed was the analysis of written materials. And a fild-trip was also made for the study. The study was limitted to the traditional culture of body adornment of the Maori including the clothing which is preserved and practicing by them at the present day, and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) By far the most widely used fiber for Maori clothing is abtained from what is commonly called New Zealand Flax. The fiber of kiekie(Freycinetia baueriana) and cabbage trees(Cordyline spp.) may also be used. The strong, long-lasting fiber of toi(cordyline indivisa) is used for a prestige warrior's cloak. Flat strips of ti kauka(Cordyline australi) are also used as thatch on rain cloaks. (2) Regardless of technique used, Maori weaving is always worked horizontally from left to right. Traditionally the work was suspended between two upright turuturu or weaving sticks. As the work progressed a second pair of uprights was used to keep the work off the ground. These uprights were moved forward as required. Because the weaver sat on the ground, the working edge was kept at a height that was comfortable to reach. No weaving tools are used, the wefts(aho) being manipulated by the fingers. The two main Maori weaving techniques are whatu aho patahi(single-pair twining) and whatu aho rua(double-pair twining). (3) The Maori wore two basic garments - a waist met and a cloak. The cloth of commoners were of plain manufacture, while those of people of rank were superior, sometimes being decorated with feather or dyed tags and decorated borders. Children ran more-or-less naked until puberty, being dressed only for special events. Some working dress consisted of nothing more than belts with leaves thrust under them. Chiefs and commoners usually went barefoot, using rough sandals on journeys over rough country (4) The adornment of men and women of rank was an important matter of tribal concern as it was in chiefly persons that prestige of the group was centred, The durable items of Maori persons adornment were either worn or carried. Ornaments of various kinds were draped about the neck or suspended from pierced earlobes. Combs decorated the head. Personal decorations not only enhanced the appearance of men and women, but many had protective magical function. The most evident personal ornament was the hei-tiki made of jade or other material. Maori weapons were treasured by their owners. They served on bottle and were also personal regalia. A man of rank was not fully dressed without a weapon in hand. Also weapons were essential to effective oratory. (5) No man or woman of rank went without some tattoo adornment except in extremely rare instances when a person was too sacred to have any blood shed. The untattooed were marked as beeing commoners of no social standing. This indelible mark of rank was begun, with appropriate rite and ritual, at puberty. And tattoo marked the person as being of a marriageable age. Maori tattoo was unlike most traditional tattoo in that its main line were 'engraved' on the face with deep cuts made by miniature bone chisels. The fill-in areas were not tattooed with cuts but with the multiple pricks of small bone 'combs' that only lightly penetrated the skin surface. The instrument of tattoo consisted of small pots of pumice or wood into which was placed a wetted black pigment made from burnt kauri gum, burnt vegetable caterpillars or other sooty materials. A bird bone chisel or comb set at right angles on a short wooden handle was dipped into the gigment, that a rod or stick was used to tap head of this miniature adze, causing penetration of the skin surface. Black pigment lodged under the skin took on a bluish tinge. A full made facial tattoo consisted of major spirals with smaller spirals on each side of the nose and sweeping curved lines radiating out from between the brows over the forehead and from the nose to the chin. The major patterns were cut deep, while the secondary koru patterns were lightly pricked into the skin.