• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.9-16
• /
• 2008

본 연구에서는 FCM 교량의 시공 시 발생하는 처짐과 시공 후 발생하는 처짐의 관리를 위해 센서 네트워크를 활용한 처짐 관리 기술을 제안하고자 하였으며, 센서에 의한 검증실험과 제안된 USN를 이용하여 실제 건설되어지고 있는 현장에 적용함으로써 그 효율성을 입증하였다. 향후, USN은 교량의 장거리 건전도 모니터링에 매우 유용할 것이라 생각된다.

• 경영과학
• /
• 제26권3호
• /
• pp.55-65
• /
• 2009

The objective of this paper is to propose an ant colony optimization (ACO) for clustering design in wireless sensor network problem. This proposed ACO approach is designed to deal with the dynamics of the sensor nodes which can be adaptable to topological changes to any network graph in a time. Long communication distances between sensors and a sink in a sensor network can greatly consume the energy of sensors and reduce the lifetime of a network. We can greatly minimize the total communication distance while minimizing the number of cluster heads using proposed ACO. Simulation results show that our proposed method is very efficient to find the best solutions comparing to the optimal solution using CPLEX in 100, 200, and 400 node sensor networks.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.277-278
• /
• 2012

• 한국광학회지
• /
• 제22권3호
• /
• pp.151-158
• /
• 2011

본 논문에서는 반사형 장거리 정밀 변위 감지기용 광학계를 설계하고 실제 구성을 해 봄으로써 작동 성능을 측정한 결과를 소개하고자 한다. 10 m ~ 250 m 거리에 있는 교량 및 건축물 등의 진동 및 변위를 감지하는 장거리 변위 감지기용 광신호 송신 및 수신용 광학계를 설계하고, 관측 거리에 따라 관측 대상체에 다양한 반사광학계를 설치하여 실제 제작된 변위 감지기의 변위 감지 분해능을 측정하였다. 광신호 송신부는 두 개의 850 nm 파장대 LED와 수렴광학계로 구성되고, 수신부에서는 위치 센서(PSD: Position Sensitive Detector)와 망원형 수렴광학계가 사용되었다. 관측 대상체의 거리에 따라 10 m 거리에서는 0.1 mm 변위 분해능과 250 m 거리에서는 3 mm 이하의 변위 분해능이 가능함을 확인하였다.

• Journal of Information Processing Systems
• /
• 제17권1호
• /
• pp.63-74
• /
• 2021

According to the double-phase cluster-head election method (DCE), the final cluster heads (CHs) sometimes are located at the edge of cluster. They have a long distance from the base station (BS). Sensor data is directly transmitted to BS by CHs. This makes some nodes consume much energy for transmitting data and die earlier. To address this problem, energy efficient multi-hop cluster-head election strategy (EEMCE) is proposed in this paper. To avoid taking these nodes far from BS as CH, this strategy first introduces the distance from the sensor nodes to the BS into the tentative CH election. Subsequently, in the same cluster, the energy of tentative CH is compared with those of other nodes, and then the node that has more energy than the tentative CH and being nearest the tentative CH are taken as the final CH. Lastly, if the CH is located at the periphery of the network, the multi-hop method will be employed to reduce the energy that is consumed by CHs. The simulation results suggest that the proposed method exhibits higher energy efficiency, longer stability period and better scalability than other protocols.

• 한국의류학회지
• /
• 제45권1호
• /
• pp.168-179
• /
• 2021

This study presents and develops a textile type touch sensor structural design that is easy to implement. First, the design of the touch sensor circuit finds the size of the switch with the easiest finger contact and selects a structure with a long circuit with the lowest resistance value. An experiment is performed on a change in an electrostatic capacitance value that accompanies the distance on the electrode and the magnitude of the electrode area of the structure; however, the structure having the distance on the electrode and the large electrode area shows the best resistance change. The laundry assessment was conducted three times at a time and ten times at a time with an average standard deviation less than one ohm, with little change in resistance. Consequently, there were no problems with durability and performance for laundry. Finally, in the bending evaluation, the difference in resistance can be seen between 1-2 ohms and was developed as a smart wearable in the future; in addition, there was no problem as a difference in resistance can be seen between 1 and 2 ohms.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.58-63
• /
• 2010

In this paper, we proposed a wearable respiration measurement system with textile capacitive pressure sensor. Belt typed textile capacitive pressure sensor approach of respiration measurement, from which respiration signatures and rates can be derived in real-time for long-term monitoring, are presented. Belt typed textile capacitive pressure sensor has been developed for this measurement system. the distance change of two plates by the pressure of motion has been used for the respiration measurement in chest area. Respiration rates measured with the textile capacitive pressure sensor was compared with standard techniques on 8 human subjects. Accurate measurement of respiration rate with developed sensor system is shown. The data from the method comparison study is used to confirm theoretical estimates of change in capacitance by the distance change. The current version of respiratory rate detection system using textile capacitive pressure sensor can successfully measure respiration rate. It showed upper limit agreement of $3.7997{\times}10^{-7}$ RPM, and lower limit of agreement of $-3.8428{\times}10^{-7}$ RPM in Bland-Altman plot. From all subject, high correlation were shown(p<0.0001). The proposed measurement method could be used to monitor unconscious persons, avoiding the need to apply electrodes to the directly skin or other sensors in the correct position and to wire the subject to the monitor. Monitoring respiration using textile capacitive pressure sensor offers a promising possibility of convenient measurement of respiration rates. Especially, this technology offers a potentially inexpensive implementation that could extend applications to consumer home-healthcare and mobile-healthcare products. Further advances in the sensor design, system design and signal processing can increase the range and quality of the rate-finding, broadening the potential application areas of this technology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2329-2331
• /
• 2001

In this paper, were developed the 3 axes attitude control sensor system to control and monitoring the moving object. The proposed sensor system has been studied in Japan, America for a year ago. But it is high expensive and has a difficulty in application. To overcome these problems, proposed the 3 axes attitude control sensor system is low cost and easily applied. Proposed sensor system is equipped with the 3 gyro sensors, 2 tilt sensors and 3 MR sensors using 80C51 microprocessor for signal processing. It's output value transmit at long distance using RS232 serial communication protocol. We expect this system shall have a good performances in many applications of control and monitoring the moving object.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.78-83
• /
• 2014

To minimize the financial loss due to power facility malfunction, on-line diagnostic techniques are required to grasp any abnormal state of facilities in the live line as well as devices to diagnose abnormal states of power facility in an easy and prompt manner. This study aims to develop a portable UV detecting system by means of UV sensors for easier and efficient inspection of the degradation state of power facility in a long distance. Accordingly, it includes a simulation of corona discharges that may occur due to degradation of power facility and detection of ultraviolet pulse generation depending on the corona discharge intensity and measuring distance in application of UV sensors. Additionally, the optimal algorithm is determined for its application to the system's degradation diagnosis program based on the measured experiment data.

• 융합신호처리학회논문지
• /
• 제24권3호
• /
• pp.166-171
• /
• 2023

효율적인 에너지 관리는 제한된 자원을 가지는 센서 네트워크에서 매우 중요한 요소이며, 클러스터 기법은 그러한 관점에서 많은 연구가 이루어지고 있다. 그러나, 클러스터 헤더의 에너지 사용이 집중되는 문제가 발생할 수 있으며, 클러스터 헤더가 전 영역에 골고루 분포되지 않고 특정 영역에 집중되는 경우, 클러스터 멤버의 전송 거리가 크거나 매우 불균등한 상태가 될 수 있다. 전송거리는 에너지 소모의 문제와 직결될 수 있다. 특정 노드의 에너지가 빨리 고갈되는 것은 센서 네트워크 생존 기간을 줄이고, 전체 센서 네트워크의 효율이 저하되므로 센서 노드들의 균등한 에너지 소모는 매우 중요한 연구과제이다. 본 연구에서는 센서 클러스터 기법에서 클러스터 헤더와 센서 노드가 에너지를 균등하게 사용하기 위한 요소들을 분석하고, 클러스터 헤더가 센서 네트워크 전역에 골고루 분포하는 균등분포 클러스터링을 제안한다. 제안하는 클러스터 기법은 멀티홉 라우팅을 사용하여 원거리 전송으로 인한 센서 노드의 에너지 소모를 줄인다. 기존 연구에서 멀티홉 클러스터 기법은 클러스터 구성과 라우팅 경로 설정의 2단계 과정을 통해서 멀티홉 클러스터 경로를 설정하는 반면, 제안하는 방식은 클러스터 헤더를 선출하는 과정에서 클러스터 라우팅 경로를 설정하여 제어 메시지 과정을 최소화한다.