• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.734-741
• /
• 2009

A new localization algorithm is proposed for a fast moving mobile robot, which utilizes only one beacon and the global features of the differential-driving mobile robot. It takes a relatively long time to localize a mobile robot with active beacon sensors since the distance to the beacon is measured by the traveling time of the ultrasonic signal. When the mobile robot is moving slowly the measurement time does not yield a high error. At a higher mobile robot speed, however, the localization error becomes too large to locate the mobile robot. Therefore, in high-speed mobile robot operations, instead of using two or more active beacons for localization, only one active beacon and the global features of the mobile robot are used to localize the mobile robot in this research. The two global features are the radius and center of the rotational motion for the differential-driving mobile robot which generally describe motion of the mobile robot and are used for the trace prediction of the mobile robot. In high speed operations the localizer finds an intersection point of this predicted trace and a circle which is centered at the beacon and has the radius of the distance between the mobile robot and the beacon. This new approach resolves the large localization error caused by the high speed of the mobile robot. The performance of the new localization algorithm has been verified through the experiments with a high-speed mobile robot.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.457-462
• /
• 2000

Boom sprayers have been known by their excellency in field efficiency worker’s safety and pest control efficacy. The boom sprayer in Korea that was developed for paddy field is not suitable for upland field of which shape is irregular and inclination is steep, due to heavy chemical tank long boom width and manual on-off control of spraying. The goal of the study was to develope a boom control system that could control boom angles of left and right boom automatically and independently corresponding to local field slope. The prime mover was selected as a cultivating tractor. Main results of this study were as follows. 1. Ultrasonic sensor whose response time was 0.1s and response angle was within $\pm$20$^{\circ}$was selected to measure distance. Voltage output of the sensor(X, Volt) had a highly significant linear relationship with the vertical distance between the sensor and ground surface(Y, mm) as follows; Y=0.0036X-0.437 2. Left and right section of the boom could be folded up by a position control device(on-off control) which could control the left and right boom independently corresponding to local slope by equalizing distances between the sensor and boom at the center and left/right boom. Most reliable DB(dead band) was experimentally selected to be 75$\Omega$(6cm). 3. At traveling velocity of 0.3~0.5m/s RMS of error between desired and achieved height was less than 4.5cm The developed boom angle controller and boom linkage system were evaluated to be successful in achieving the height control accuracy target of $\pm$10cm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1048-1053
• /
• 2005

This paper presents design and integration of the ROBHAZ-DT3, which is a newly developed mobile robot system with chained double-track mechanisms. A passive adaptation mechanism equipped between the front and rear body enables the ROBHAZ-DT3 to have good adaptability to uneven terrains including stairs. The passive adaptation mechanism reduces energy consumption when moving on uneven terrain as well as its simplicity in design and remote control, since no actuator is necessary for adaptation. Based on this novel mobile platform, a rescue version of the ROBHAZ-DT3 with appropriate sensors and a semi-autonomous mapping and localization algorithm is developed to participate in the RoboCup2004 US-Open: Urban Search and Rescue Competition. From the various experiments in the realistic rescue arena, we can verify that the ROBHAZ-DT3 is reliable in traveling rugged terrain and the proposed mapping and localization algorithm are effective in the unstructured environment with uneven ground. The another application is an military robot for an EOD(Explosive Ordnance Disposal) and reconnaissance mission. The military version of the ROBHAZ-DT3 with a water disrupter, a thermal scope and a long distance wireless communication device is developed and sent to the area of military tactics in Iraq. Consequently, the feasibility of the military version of ROBHAZ-DT3 is verified.

• International Area Studies Review
• /
• v.14 no.1
• /
• pp.279-298
• /
• 2010

This paper investigates the characteristics of Korean international tourism demand for selected 13 destination countries by estimating income and travel price elasticities using quarterly data from 1990:1 to 2006:2. Major findings of this paper could be summarized as follows. First, long-run equilibrium relationships between Korean international tourism demand for 13 destination countries, real income and travel price variables are confirmed. Second, the estimated income elasticities of Korean tourism demand for 13 destination countries are all elastic; especially, those for Australia, Philippine, Thailand and China are very elastic. And their estimated values vary with destination countries, which implies the income effects for 13 destination countries are all different; however there is no evidence that the income effects could be characterized by traveling distances. Third, the estimated travel price elasticities of Korean tourism demand for 13 destination countries also differ from destination countries; in most cases, they are elastic except those for Hong Kong and United States. The most travel price elastic countries are Canada, Australia and New Zealand.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• Korean Journal of Environment and Ecology
• /
• v.32 no.5
• /
• pp.478-485
• /
• 2018

With the total population of 3,356 worldwide as of 2016, the black-faced spoonbill (Platalea minor) is designated as "endangered (EN)" species by IUCN. About 70% of population breeds on the uninhabited islands near the west coast of Korea and wintering area is Taiwan, China, Hong Kong, etc. However, there is few detail research in Korea and East Asia on black-faced spoonbill's long range migration and its habitat when migrating southward. We studied black-faced spoonbill's migration route, distribution, stopover, wintering sites, and timing of migration movements using a wild-tracker (WT-200, GPS-Mobile phone based telemetry, KoEco). We caught the black-faced spoonbills in the breeding sites (Gugi island, Bi island, Sangyeobawi, Chilsan island) in Korea in late June 2014. We attached the wild-tracker to 10 juvenile black-faced spoonbills. The tracking showed that the black-faced spoonbills started southward migration between late October and early November. The traveling distance to wintering site was maximum at 1,820 km, minimum at 746 km, the average at 1,201km. The maximum daily traveling distance was 1,479 km with an average of 782 km. The average days it took from breeding site to wintering site was 10 days (SD=10.7). The shortest duration was 2 days, and the longest duration was 34 days. Most individuals used 2-3 stopover sites between the breeding sites to the wintering sites and stayed almost 1-2 days (maximum 31 days). Stopover sites were wetlands such as rivers, streams, reservoir, and mud flat. The wintering sites were coastal areas (five individuals) in China, inland (one individual) in China, Taiwan (three individuals), and Japan (one individual). In conclusion, it is necessary to preserve the stopover sites and wintering site of the black-faced spoonbills through consultation and protection policy between countries and establish the systematic preservation measures and activity plans through continued moniting and additional studies.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.251-258
• /
• 2014

A wheelchair is a typical mobility aid for the physically disabled or the old and the weak, and is the most commonly used rehabilitation aid. In general, most of users of manual wheelchair have difficulty though vocational rehabilitation and independent living is possible. The reason is that long-distance movement is always accompanied with wheelchair transfer problem because a wheelchair is used as direct means of transport. Hence, the wheelchair transfer problem should be first solved in order that a wheelchair user can independently live. Therefore, this study examined and analyzed the domestic and overseas launched products and patented technologies of wheelchair transfer system for vehicle, and proposed a wheelchair transfer mechanism of a new system for vehicle. This study proposed a wheelchair transfer mechanism for vehicle in order to remove the disadvantage of wheelchair transfer system for vehicle to support the conventional wheelchair user's movement, and in order to conform with the structure of domestic welfare vehicle for the disabled. Because a difference between storage space installed in the roof of vehicle and storage space for leisure, which is generally utilized, gets to disappear by applying this proposed mechanism, popularity among users can be increased. And storage space that has become smaller like this will be capable of decreasing the disadvantage of air resistance in traveling. Besides, because of getting to conform with the structure of welfare vehicle, restrictions on the application range will disappear from small sedan to SUV. Therefore, users can have more choices.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.19-26
• /
• 2014

International attention on the Northern Sea Route has been increased as the decreased sea-ice extents in Northern Sea raise the possibility to develop new sea routes and natural resources. However, to protect ships' safety and pristine environments in polar waters, International Maritime Organization(IMO) has been developing the Polar Code to regulate polar shipping. The marine navigation supporting system is essential for ships traveling long distance in the Northern Sea as they are affected by ocean weather and sea-ice. Therefore, to cope with the IMO Polar Code, this research proposes the functional requirements to develop the marine navigation supporting system for the Northern Sea Route. The functional requirements derived from the IMO Polar code consist of arctic voyage risk map, arctic voyage planning and MSI(Marine Safety Information) methods, based on which the navigation supporting system is able to provide dynamic and safe-economical sea route service using the sea-ice observation and prediction technologies. Also, a requirement of the system application is derived to apply the marine navigation supporting system for authorizing ships operating in the Northern Sea. To reflect the proposed system in the Polar Code, continual international exchange and policy proposals are necessary along with the development of sea-ice observation and prediction technologies.