• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.767-780
• /
• 1997

One of the most common problems of implant prosthesis is the screw loosening of abutment screws. This brings on discomfort in mastication, inflammation in the peri-implant tissue due to poor oral hygiene and fracture of prosthesis or loss of osseointegration. To prevent screw loosening, appropriate implantation to direct the occlusal force to the long axis of the implant, accurate design of the superstructure, decrease of the occlusal table, and adequate torque on the abutment screw are necessary. In this study the screw loosening torque was evaluated in implants with dimples or flutes in the internal surface of abutment screw holes. The abutments were fastened with slot type and hexagonal type abutment screws and were sealed with vinyl poly siloxane impression and bite registration material respectively. The screw loosening torque was evaluated after 1,800 and 12,600 times loading under a loading machine. The results were as follows. 1. The flute form group showed significantly higher loosening torque compared to the dimple form group and the group with no inner surface treatment (p<0.05). 2. There was no statistical difference in loosening torque according to the sealing materials. 3. The loosening torque according to the types of abutment screw showed no significant difference. 4. The loosening torque was significantly higher after 1800 times loading compared to 12600 times loading(p<0.05). From the above results. it is thought that formation of a flute in the internal surface of the screw hole decreases the chance of screw loosening, but the sealing materials and types of abutment screw did not show significant difference in prevention of screw loosening.

• Fisheries and Aquatic Sciences
• /
• 제13권3호
• /
• pp.224-230
• /
• 2010

Growth hormone (GH) is known as one of the main osmoregulators in euryhaline teleosts during seawater (SW) adaptation. Many of the physiological actions of GH are mediated through insulin-like growth factor-I (IGF-I), and the GH/IGF-I axis is associated with osmoregulation of fish during SW acclimation. However, little information is available on the response of fish IGF-II to hyperosmotic stress. Here we present the first cloned IGF-I and IGF-II cDNAs of marine medaka, Oryzias dancena, and an analysis of the molecular characteristics of the genes. The marine medaka IGF-I cDNA is 1,340 bp long with a 257-bp 5' untranslated region (UTR), a 528 bp 3' UTR, and a 555-bp open reading frame (ORF) encoding a propeptide of 184 amino acid (aa) residues. The full-length marine medaka IGF-II cDNA consists of a 639 bp ORF encoding 212 aa, a 109 bp 5' UTR, and a 416 bp 3' UTR. Homology comparison of the deduced aa sequences with other IGF-Is and IGF-IIs showed that these genes in marine medaka shared high structural homology with orthologs from other teleost as well as mammalian species, suggesting high conservation of IGFs throughout vertebrates. The IGF-I mRNA level increased following transfer of marine medaka from freshwater (FW) to SW, and the expression level was higher than that of the control group, which was maintained in FW. This significantly elevated IGF-I level was maintained throughout the experiment (14 days), suggesting that in marine medaka, IGF-I is deeply involved in the adaptation to abrupt salinity change. In contrast to IGF-I, the increased level of marine medaka IGF-II mRNA was only maintained for a short period, and quickly returned a level similar to that of the control group, suggesting that marine medaka IGF-II might be a gene that responds to acute stress or one that produces a supplemental protein to assist with the osmoregulatory function of IGF-I during an early phase of salinity change.

• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.66-74
• /
• 2009

Purpose: The importance of the deformities in alar - columellar complex has been underestimated in Asian ethnic groups for the last decades. Fortunately, with increasing familiarity of the open rhinoplasty techniques, the anatomic details of the nasal tip have been pointed up. Definitely, having an interest and demand for improving the sub - normal relationship between the alar rim and columella are indebted for such growing of knowledge about nasal tip anatomy. However, it is true that any single procedure is not settled as versatile and fully confident modality to correct the retracted notching of the alar rim. With this article, I should like to propose another useful option for treating retracted ala. Methods: The author has tried to correct alar rim retraction by means of: (1) Triangular onlay septal cartilage graft on the lower lateral cartilage with the medial end fixed to the anterior surface of the lateral crus(Alar extension graft), (2) Inserting lateral end of the alar extension graft to the vestibular skin pocket in the form of a finger - in - groove, (3) using the vestibular skin in the form of an advancement flap, and (4) using the soft shield graft to prevent possible visible step - off of the alar margin. Results: The author applied an alar extension graft to 16 patients in order to correct a retracted ala for the last 27 months (August, 2003 - October, 2005). The distances from alar rim to long axis of nostril were improved to be within 2 mm in all of the cases, and also the shape of the alar rim changed to a round form. Nostril asymmetry (6%) in one case, temporary palpable step - off (18%) in three cases, temporary visible step - off (6%) in one case, and temporary paresthesia of the tip (25%) in four cases were observed. Conclusion: The alar extension graft is simple and efficacious. It does not need donor sites other than the operative field, and its results are predictable. In particular, since it may give structural intensity to a weak lower lateral cartilage, it may be preferentially used for the correction of a retracted ala that arises from hypoplastic lower lateral cartilage. Moreover intensified lower lateral cartilage also improves the esthetic shape of lobule.

• Archives of Reconstructive Microsurgery
• /
• 제13권2호
• /
• pp.101-106
• /
• 2004

Purpose : This study evaluated the effect of VEGF in the arterial anastomosis by using light and electron microscopy. Marerials and method : Rats underwent femoral arterial end-to-end anastomosis after transection and topical VEGF treatment. The proximal and distal segments of the femoral arteries was drenched with 1 drop of VEGF $(100ng/100{\mu}l/bottle)$. and when half of the repair was finished, the other 1 drop was drenched and then the repair was continued to complete the anastomosis. Gross and histologic characteristics of arterial wall were assessed after 3 days, 1, 3 and 5 weeks. In the control group, normal saline solution instead of VEGF was dropped with the same method in the anastomosis. Results : The histologic findings of the arterial wall were the vascular remodeling with the infiltration of inflammatory cells at early stages and the tissue fibrosis at lately stages in the anastomotic sites of the control and the VEGF-treated groups. The scanning electron microscopic results were; (1) the anastomotic sites were covered by many irregular cells with long cytoplasmic processes at the early stages. (2) After 1 week, endothelial cells started to cover the anastomotic sites. (3) After 3 weeks, the anastomotic sites were partially covered by endothelial cells in the control group. (4) After 5 weeks, the anastomotic sites were completely covered by endothelial cells in the control and VEGF-treated groups. (5) In the VEGF-treated group, the anastomotic site was completely covered by endothelial cells which directed parallel to longitudinal axis of arteries after 3 weeks. Conclusion : Topical VEGF maintained luminal integrity by decreasing fibrosis and increasing re-endothelialization. These findings suggest that topical VEGF may be a promising new strategy to enhance healing and improve the outcome of vascular anastomosis.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.933-942
• /
• 2006

In this study, temperature, turbidity, suspended paniculate matter (SPM) distribution and mineral characteristics were investigated to explain spatial distribution of the turbid-water environment of Yongdam reservoir in July, 2005. Six stations were selected along a longitudinal axis of the reservoir and sampling was conducted in four depths of each station. Water temperature was showed the typical stratified structure by the effects of irradiance and inflow. Content of inorganic matter in suspended particles increased with the concentration of suspended particulate matter (SPM) due to the reduction of ash-free dry matter (AFDM). Turbidity ranged from 0.6 to 95.1 NTU and the maximum turbidity value of each station sharply increased toward downstream from upstream. The high turbidity layers were located at the depth between 12~16 m. Particle size ranged from 0.435 to $482.9{\mu}m$. day and silt-sized particles corresponded 91.9~98.9% and 1.1~8.0% in total numbers of SPM, respectively. Turbidity showed high correlations with clay (r=0.763, p<0.05) and silt content (r=0.870, p<0.05).Inorganic matter content (r=0.960, p<0.01) was more correlated with turbidity than organic matter (r=0.823, p<0.05). Mineral characterization using x-ray diffraction and electron probe microanalyzer demonstrated that the major minerals contained in the SPM were kaolinite, illite, vermiculite and smectite. As results of this study, surface water discharge as well as small size of the SPM were suggested as long-term interfering factors in settling down the turbid water in the reservoir.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.518-527
• /
• 2015

본 연구에서는 바이오 매스기반의 셀룰로오스 나노크리스탈(cellulose nanocrystals, 이하 CNC)과 PLA (polylactic acid, 이하 PLA)를 tetrahydrofuran (THF)에 용해시킨 서스펜션으로부터 PLA 및 PLA/CNC 나노섬유 복합재 매트를 상온에서 전기방사법으로 제작하였다. PLA 및 PLA/CNC 나노복합재 매트의 형상은 섬유가 긴축을 따라 3차원 구조의 표면으로 정렬된 것으로 관찰되었다. PLA 및 PLA/CNC 나노섬유 복합재 매트의 인장강도는 CNC 함량이 증가할수록 감소하였는데, 이는 전기방사된 섬유 속에 형성된 비드와 PLA와 CNC의 낮은 계면접착력 때문으로 기인된다. PLA/CNC 복합재 매트를 구성하는 섬유의 평균 지름 크기는 CNC의 함량이 증가할수록 작아졌다. 한편 PLA/CNC 나노섬유 복합재 매트의 열안정성은 CNC의 함량이 증가할수록 증가하는 것을 보였다.

• Applied Microscopy
• /
• 제41권4호
• /
• pp.223-228
• /
• 2011

백색광 주사간섭계는 다양한 시료의 표면 특성을 분석하기 위하여 널리 활용되고 있다. 이 기법은 재료공학 분야에서 오래 전부터 이용되었으며 정성적인 형상 이미지 이외에도 정량적인 3차원 결과를 제공한다. 이 기법에서는 백색광을 광원으로 이용하는데, 기준면과 측정면에서의 반사광을 합쳐서 형성되는 간섭신호를 형태 정보로 활용한다. z축 결과인 고도는 회색수준으로 구분되어 제시된다. 이 기법을 통하여 대영역으로 생물 시료를 신속하고 비파괴적으로 형태를 계측할 수 있다. 연골세포, 치아 법랑질, 식물 잎을 대상으로 적용한 사례가 있다. 특히 표면 구조물의 폭, 길이, 경사각과 같은 특성도 이 기법을 통하여 정량화할 수 있다. 이 기법을 적용하기 위하여 일정 수준의 반사도가 필요한데, 식물 잎에서의 반사도는 그 요건을 충족하였다. 전도성 금속의 코팅 등 부가적인 시료 전처리가 필요 없으므로 이 기법을 통한 생물 시료의 정량적 측정이 더욱 증가할 것으로 예상한다.

• 보건행정학회지
• /
• 제30권2호
• /
• pp.253-262
• /
• 2020

Background: The public health care system of a country is shaped and driven by its historical background as well as social, economic, and cultural structures. This study sheds light on the unique features, strengths, and weaknesses of the health insurance systems of South Korea (Korea) and Peru. Methods: The capacity mapping tool was used to explore the Korean and Peruvian population and geographical structures; health insurance laws, regulations, and policies; payment systems; eligibility and contribution collection; and long-term care insurance. Results: The study found that the Korean government took the lead in integrating multiple insurers into a single-payer system in an effort to reinforce and stabilize its health insurance system in 2000. Peru has been developed mixed model such based on taxes and contributions, to address a gap between different social classes. Peruvian government developed a two-axis system, one for low-income earners, financed by taxes, and another financed by contributions paid by workers and government officials in the formal sector. Peru has introduced many variations to its fee payment and insurer systems, target population, and coverage scope, and maintains its health insurance system accordingly to this day. Conclusion: The current study provides observation of the Health Insurance System in two different countries and helps to understand possible ways to improve the health insurance system in both countries. Based on this study, Peru will be able to see how its system differs from Korea's and benefit from the related policy implications.

• Restorative Dentistry and Endodontics
• /
• 제2권1호
• /
• pp.38-49
• /
• 1976

Central and lateral incisors of 20, 40 and 60 age groups were bisected pararelly to long axis and middle portion of mesio-distal of teeth. And author measured the hardness of various areas in enamel and dentin with vickers hardness tester. Measured levels were divided into the labio-middle portion, middle portion of incisal edge and linguo-middle portion in enamel and dentin of all age groups. The results were as follows; 1) Total average hardness of enamel for 20, 40 and 60 age groups were respectively Hv. 366.5${\pm}$5.75, Hv. 372.9${\pm}$8.16 and Hv. 389.8${\pm}$10.27. 2) Total average hardness of dentin for 20, 40 and 60 age groups were respectively Hv. 51.0${\pm}$2.14, Hv. 54.0${\pm}$1.87 and Hv. 55.3${\pm}$2.23. 3) Total microhardness values in enamel and dentin of 60 age group was highered than 20 and 40 age groups. 4) The hardness values of enamel and dentin in all age groups were detected lower value on the middle portion of incisal edge than the labio-middle portion and linguo-middle portion. 5) Microhardness values of enamel was highered gradually from the dentinoenamel junction to the outer surface and it lowered at the outermost surface in all age groups. The microhardness values of dentin were the highest values at 600${\mu}$ from dentino-enamel junction and the lowest values at near the pulp chamber in all age groups.

• Restorative Dentistry and Endodontics
• /
• 제28권3호
• /
• pp.232-240
• /
• 2003

This study is to investigate the canal system in the mesiobuccal root of the maxillary first molar. 61 maxillary first molars were randomly selected. Serial transverse sections were made perpendicular to the long axis of the mesiobuccal root. Each section was placed in 3% sodium hypochlorite for 24 hours and rinsed in water and dried. The resected surface was stained with 2% methylene blue dye and examined with stereomicroscope. 1 Canal configuration analysis showed that 36.1% of the specimen classified as type I, 16.4% as type II , 37.7% as type III and 9.8% as type IV. 2. Type II canal was merged in one canal within 1 to 4mm of the apex. 40% of type II canal converged at 2mm of the apex. 3. Type IV canal was divided into two canal within 2 to 4mm of the apex. 66.6% of type IV canal branched off at 2mm of the apex. 4. None of the sections had more than two main root canal. 5. 48.4% of the sections in 3mm with two canals contained an isthmusand more than 70% with two canals has isthmus at 4 to 5mm sections. 63.9% of the mesiobuccal root of maxillary first molar had two canaland 76.5% of sections with two canals in 5 MM had an isthmus. Because of this complexity the clinician should always search for extra canal carefullyand root canal system, including an isthmus, should be cleaned and shaped completelyand obturated three dimensionally for successful endodontic treatment.