• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.24-25
• /
• 2006

SmBCO coated conductors were successfully fabricated using EDDC (Evaporation using Drum in Dual Chambers) deposition system that is a bath type co-evaporation system for fabrication of superconducting tape and divided into two chambers named evaporation chamber and reaction chamber. To obtain long and high quality superconducting coated conductor, it is very important to secure the uniformity of all the deposition parameters m the deposition system such as deposition temperature, oxygen partial pressure, compositional ratios and so on. Therefore, we investigated the distribution of the parameters along the axis of the drum m EDDC on which tapes were wound helically. When the temperature on the middle point of deposition zone was $700^{\circ}C$, that on the edge of deposition zone was $675^{\circ}C$. When the thickness of SmBCO layer on the middle point of deposition zone was 1063 nm, that on the edge of deposition zone was 899 nm. The partial pressure of oxygen was 5 mTorr in the reaction chamber while that was $7{\times}10^{-5}$Torr in the evaporation chamber. The composition ratio of Sm:Ba:Cu, that was measured by EDX, was very uniform along the axis of the drum. Under these deposition conditions, critical current distribution along the drum axis was 175 A/cm, 190A/cm, 217.5 A/cm, 182.5 A/cm, 175 A/cm with the interval of 9 cm between samples. It means that the EDDC system has the potential of fabricating (100m, 200A) class coated conductor.

• Journal of Veterinary Clinics
• /
• v.18 no.2
• /
• pp.139-145
• /
• 2001

This study was undertaken to determine the normal serial ultrasonographic appearance of the postpartum uterine involution in small pet dogs (Yorkshire terrier and Maltese). Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored by ultrasonography in 12 small pet dogs. Serial ultrasonographic examinations were done daily during the first week, 3 days interval from 8 to 30 days, and weekly from 31 to 100 days postpartum. The excretory period of vaginal discharge in 12 normal bitches of uterine involution was finished completely within 3 weeks postpartum. The short axis shape of the uterus was initially often flaccid-appearing. It varied from circular to polygonal. This lasted until 15.75$\pm$3.84 days postpartum, during which time the short axis uterine shape gradually changed to circular. Also, the long axis shape of the uterus was a beaded appearance until 30.89$\pm$4.25 days postpartum. After 30 days, it was appeared as tubular shape between placental and interplacental sites. The ultrasonographic image of the postpartum uterus consisted of four echogenicity distinct layers. Uterine wall was represented as very hyperechoic serosa, hypoechoic myometrium, hyperechoic endometrium and anechoic structures of fluid in the uterine cavity until 7 days postpartum. The individual uterine layers were most prominent during the first week postpartum, and they became progressively less distinct throughout the course of uterine involution. The thickness of myometrium was decreased rapidly in the placental sites from 4.47$\pm$1.42 mm at 1 day to 1.92$\pm$0.26 mm at 16 day, and in the interplacental sites from 3.19$\pm$0.61 mm at 1 day to 1.39$\pm$0.61 mm at 16 day. And it was decreased slowly until 94 day and was been minimum thickness at 94 day. The thickness of endometrium was also decreased like that of myometrium. The uterine diameter in the placental sites was decreased from 22.28$\pm$3.01 mm at 1 day to 16.11$\pm$1.46 mm at 7 day, and in the interplacental sites was decreased from 13.65$\pm$2.34 mm at 1 day to 9.41$\pm$1.59 mm at 7 day postpartum. From 7 day to 93 day, the change of diameter was more and more slow. At 94 days postpartum, the uterine diameter was 5~6 mm both placental and interplacental sites, and the uterine horns were uniform hypoechoic, tubular structures without enlargement. Therefore, complete involution of the uterus occurred at 94 days. It was concluded that normal post partum uterine involution in small pet dogs appeared to be completed 94 days postpartum by gross findings such as vaginal discharges, and by ultrasonographic findings, uterine shape and echogenicity.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.188-193
• /
• 2007

We simulated the magnetization reversal behavior of submicron-thickness magnetic films by applying pulses of sub-ns-long durations and amplitudes along the easy axis. The films were rectangular and elliptical $Ni_{80}Fe_{20}$, and their thickness was 2 nm and 4 nm. We observed different behaviors depending upon the shape and thickness of the films and found a normal non-switching in regions in which we expected complete switching after relaxation. In the elliptical film, the non-switching regions were found to be random and to be widely distributed throughout the switching map. The strong demagnetization field along the z-axis, the film thickness direction, is likely responsible for this abnormal behavior. In the rectangular film, the abnormal non-switching regions were less distributed than they were in the elliptical film due to edge domains resulting from the small $M_z$ or demagnetization field during the switching. Our simulation confirms that large demagnetization is detrimental to the ultra-fast magnetization reversal of magnetic ultra-thin films.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.325-336
• /
• 2009

The purpose of this study was to investigate the eruption pattern of the mandibular first molar in sagittal, frontal and horizontal views using the cone beam CT scanning. CT images were obtained from healthy 83 children (42 boys, 41 girls) between 3 to 10 years of age with a normal dentition according to Nolla stage. 1. In the frontal and horizontal view, the intermolar width decreased continuously with stage and slightly increased at the last stage. 2. In the sagittal and frontal view, eruption distances from occlusal plane were observed the largest change between stage 5 and 7. 3. In the horizontal and sagittal view, mandibular first molar from distal surface of primary second molar moved distally between stage 4 and 6. 4. In the sagittal view, angle from occlusal plane to mesio-distal axis increased between stage 4 and 8. 5. In the frontal view, angle from occlusal plane to bucco-lingual axis increased continuously during all stage. 6. In the horizontal view, angle from midsagittal plane to long axis increased between stage 5 and 8.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.327-331
• /
• 2011

Purpose: The purpose of this study was an accurate grasp of the astigmatic change due to eyes accommodation on near vision and suggested problems occurring accommodative astigmatism using near glasses. Methods: 154 subjects(308eyes) from 20 to 40 years selected for this study who had many opportunity of near vision. First, far vision corrective refraction measured using the phoropter, and then both eyes opened simultaneously for maintaining the function of binocular put away dot chart 40 cm. One eye was fogging and the other eye measured near vision astigmatism axis and degrees astigmatism using cross cylinder, and then compared with far astigmatism. Results: Increased degree of astigmatism persons on near vision more than decreased or did not changed degree of astigmatism persons, which could affect visual acuity more than 0.75 diopters in 30 eyes with an increase of 9.7% of total subjects. Direct astigmatism and oblique astigmatism were increased on near vision. Astigmatic axes were rotated base in direction on both eyes and 66.9% of subjects were more than ${\pm}$5$^{\circ}$ rotation. Due to the rotation axis of astigmatism, residual astigmatism is expected to occur and expect to adversely affect the eyes. Conclusions: Long-term using the glasses without correction of increased astigmatic and rotated axis on near vision should occur new residual astigmatism and increase the asthenopia also. Considered to be taken astigmatic change on near vision during near refraction examination.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2005

The fiber Raman amplifier(FRA) is a distinctly advantageous technology. Due to its wider, flexible gain bandwidth, and intrinsically lower noise characteristics, FRA has become an indispensable technology of today. Various FRA modeling methods, with different levels of convergence speed and accuracy, have been proposed in order to gain valuable insights for the FRA dynamics and optimum design before real implementation. Still, all these approaches share the common platform of coupled ordinary differential equations(ODE) for the Raman equation set that must be solved along the long length of fiber propagation axis. The ODE platform has classically set the bar for achievable convergence speed, resulting exhaustive calculation efforts. In this work, we propose an alternative, highly efficient framework for FRA analysis. In treating the Raman gain as the perturbation factor in an adiabatic process, we achieved implementation of the algorithm by deriving a recursive relation for the integrals of power inside fiber with the effective length and by constructing a matrix formalism for the solution of the given FRA problem. Finally, by adiabatically turning on the Raman process in the fiber as increasing the order of iterations, the FRA solution can be obtained along the iteration axis for the whole length of fiber rather than along the fiber propagation axis, enabling faster convergence speed, at the equivalent accuracy achievable with the methods based on coupled ODEs. Performance comparison in all co-, counter-, bi-directionally pumped multi-channel FRA shows more than 102 times faster with the convergence speed of the Average power method at the same level of accuracy(relative deviation < 0.03dB).

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.394-401
• /
• 2013

Here we report the results of an experimental laboratory test to verify the applicability to railway bridges of a PSC I girder of which the upper flange thickness was increased to improve sectional performance. The thicker this flange is, the further upward the neutral axis is moved. If in this way the span length can be increased to 40m long, the bridge may be constructed with four girders instead of five. Therefore, construction cost could be lowered by reducing the weight of the long span structure due to increased sectional efficiency. It was also necessary to be certain that the dynamic performance of this relatively flexible structure would be applicable to railway bridges. Therefore numerical analysis, as well as static and dynamic tests, was carried out for a full-size PSC I girder. Based on these results, it was verified that the performance of the PSC I railway bridge satisfied the performance criteria of the design code.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.308-316
• /
• 2018

Telescopic denture has advantages such as transfer the occlusal force to the long axis of the abutment, easiness of oral hygiene management, increase of retention and stability, splint effect due to secondary fixation between abutments and have been reported a higher success rates than conventional removable partial denture (RPD). However, there are disadvantages such as complex laboratory procedures, long treatment periods and high costs, and high incidence of complications. This clinical report describes two cases, a 4-point supported telescopic denture using telescopic crown and a 2-point supported telescopic denture using conical crown with functionally satisfactory results. Frequent complications of telescopic denture, which are reported in various literature were reviewed. Clinical and laboratory procedures were performed in consideration of complications that reported.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.339-352
• /
• 1996

Many dentists have been taken an interest in restoration of severly damaged teeth after endodontic treatment and it is a true that there are lots of studies about it. In these days, although we have used Para-Post, pins, threaded steel post, cast gold post and core, and so on, as a method of restoration frequently, it has been in controversy with the effects of them on the teeth and surrounding periodontal tissue. In this study, we assume that the crown of the upper 1st premolar was severly damaged, and after the root canal therapy, two most common types of restoration were carried out ; 1) coronal-radicular amalgam restoration, 2) after setting up the Para-Post, restore with amalgam core and gold crown. After restoration, in order to present the concentration of stress at internal portion of the tooth and the surrounding periodontal tissue, we doveloped a 2-dimensional finite element model of labiopalatal section, then loaded forces from 2 long perpendicular to the lingual incline of buccal ridge an the middle point, parallel to the long direction axis of tooth at the fossa-were applied. The analyzed results were as follows : 1. Stress of the normal first premolar was concentrated on the most weakest anatomical structure, that is, cervical area, and no stress on the bifurcated area of the canal. 2. Crown restoration after root canal therapy causes large stress concentration on the bifurcated area of the canal. This stress concentration has larger value in case of lateral movement of mandible, and there are decrease in the stress concentration compared with natural tooth. 3. Coronal-radicular amalgam restoration method transports more stress to the tooth structure than restoration using Para-Post. 4. There are more stress concentration around Para-Post in the case of lateral movement, and we have more favo rable result when restored with Para-Post. 5. Generally, stress in the lateral movement is larger than stress in the perpendicular load.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.156-161
• /
• 2010

To improve the standard of living of its citizens, local festivals is located in one axis of the new culture. These symptoms shows that there is increasing awareness of traditional culture such as Hanryu. The purpose of this study is to develope the presentative Dress of Andong International Maskdance Festival to stimulate curiosity and participate easily. 24 villages in Andong were present to represent appropriate Dress of Maskdance Festival which have been announced through the fashion show. The characteristics of the maskdance dress which presented in this study has the purpose of making the specialties of each village to tourism resources. Characteristics of the maskdance dress which designed to blend on the mask was as following. (1) Maskdance dress should shown well and must have strong durability of strenuous exercise in maskdance (2) Maskdance dress should be able to get the sympathy of the spectators. (3) Maskdance dress should be sympathetic as modern costumes. (4) Aesthetics as custumes and requirements as product must be met. (5) Acceptance of Andong region's traditional beauty is required. (6) Maskdance dress is likely to require long-term use. (7) Maskdance dress must be able to accommodate a variety of body conditions. Through customer satisfaction survey of 158 spectators and 48 members of fashion show, the relevance of masks and costumes, aesthetic and motility of costumes, commercialization potential, especially costume' motility and functional fitness of clothing sizes was highly evaluated. So maskdance dress or stage costumes as long-term development is likely to be considered. And continued research is needed.