• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.846-854
• /
• 1999

Measurements of the local heat transfer coefficients were made on a hemispherically convex surface with a round oblique impinging jet. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystal for the surface temperature measurements. The Reynolds number used was 23000 and the nozzle-to-surface distance was L/d=2, 4, 6, 8, and 10 and the jet angle was $\alpha$=$0^{\circ}\; 15^{\circ}\;30^{\circ}C\; and \;40^{\circ}C$. In the experiment, the Nusselt number at the stagnation point decreases as the jet angle increases and has the maximum value for L/d=6. The X-axis Nusselt number distributions exhibit Secondary maxima at $0^{\circ}C\re $\alpha$\re 15^{\circ}C, L/d\le6$ for X/d＜0(upstream) and at $0^{\circ}C\re $\alpha$40^{\circ}C,\;L/d\le4\;and\; at\; 30^{\circ}C\re $\alpha$$\leq$40^{\circ}C,\;L/d\le 6 $for X/d＞0(downstream). The secondary maxima occurs at long distance from the stagnation point as the jet angle increases or the nozzle-to-surface distance decreases. The Y-axis Nusselt number distributions exhibit secondary maxima at Y/d=$\pm$2 for $0^{\circ}C\le a\le30^{\circ}C\; and\; L/d\le4, and \;for\;$\alpha$=40^{\circ}C$and L/d=2. The displacement of the maximum Nusselt number from the stagnation point increases as the jet angle increases or the nozzle-to-surface distance decreases and the maximum distance is about 0.67 times of the nozzle diameter. The ratio of the maximum Nusselt number to the stagnation Nusselt number increases as the jet angle increases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1327-1334
• /
• 1988

In this study rotating bending fatigue tests have been carried out with the deep non-through radial holed notch specimens of low carbon steels(SM 22C). It is investigated that the behaviors of surface and interior fatigue crack propagation and the variations of the shape of the cracked surface on the magnitude of bending stresses. The Obtained results are summarized as follows. (1) The relations between [Crack length] and [Cycle ratio] are expressed by following eq. in the 0.1~0.6 range of N/ $N_{f}$ long[ crack length] = A + B [N/ $N_{f}$ ] In case of surface crack length, values of A and B are uniformed independent upon the magnitude of bending stress, but those are variable according to the magnitude of bending stress for interior crack length. (2) The following eq. is derived on the surface crack propagation rate, bending stress and surface crack length. (dl/dN)=(3.94*10$^{-12}$ ).sigma.$^{4.54}$l (3) Under small stress, interior crack propagation rate increase with the interior crack growth but it decrease for large stress. (4) The shape of cracked surface depends upon the magnitude of bending stress. Under small stress fatigue crack propagates as an semi-ellipse with semi-major axis of surface crack length with semi-major axis of interior crack length for large stress.s.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.67-74
• /
• 2001

This paper presents a landscape design for the citizen plaza around the ˝Woojeongchongkuk˝(the 1st Korean postal building) where the ˝Gapsinjeongbyeon˝(1844 coup d´etat) occurred and which was once used as the ˝Jeoneoigam˝(a palace hospital). The site is located in 39 Kyeonji-dong, Jongno-gu, Seoul, and of which area is about 2,013$m^2$. The landscape design goals are to build traditional spaces which fit the traditional buildings and where people feel the old atmosphere; to build interesting spaces where people can learn the post and telegraphic history; and to build nature-friendly green rest spaces in the city. To achieve these goals, symbolic, traditional, educational, historical, and environmentally-friendly concepts are developed. With this concept the space is divided into two axis of the pst and telegraph of Korea. Along the two axis the Postage Stamp ˝Madang˝(yard), the Letter Garden, the Telegraphic ˝Ddeul˝(garden), the Communication Plaza, and the ˝Jeoneoigam˝(old palace hospital) and the ˝Gapsinjeongbyeon˝(1884 coup d´etat) Memorial Place are arranged. The Postal Stamp Madang which symbolizes the first Korean postage stamp is a space for studying history and evolution of stamps in Korea. The Letter Garden which symbolizes and formalizes a letter paper is composed with white bamboo trees which are planted linearly and long granite benches on which famous letters are carved. In the Telegraphic Ddeul which symbolizes the telegraph, the history of the telegraphic instrument and the telephone is exhibited. In the Communication Plaze which symbolizes future post and telegraph service extending to the world, the images of satellite communication, internet, webmail etc. are exhibited. The Jeoneoigan, and the Gapsinjeongbyeon Memorial Place is for memorializing the historic place and events. Throughout the whole place, various models and ceramic picture tiles about the post and telegraph and exhibited for effective education. In conclusion, sustainable management schemes for the site are suggested.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.447-455
• /
• 2010

The objective of this study was to analyze the difference in kinematic variables for successful and unsuccessful golf putting strokes. The study population included 8 male secondary school golf players who had played golf for over 3 years and whose handicap was 4 or lower. A hole was made on a 5-m-long artificial flat mat for practice, and an environment similar to that of a real green was created. The participants' motions were analyzed through 3D image analysis, and the difference in kinematic variables for successful and unsuccessful putting strokes in the same direction was determined. Data analysis revealed the following findings: The time spent for a segment of putting was the greatest for the backswing segment for both successful and unsuccessful strokes. During address and impact, the both changed to a larger extent. For successful putting strokes, the change in the elbow angle during the downswing was greater for the right elbow than for the left elbow. For both successful and unsuccessful putting strokes, the left shoulder angle increased during the segment from address to the turning point and decreased during the segment from the turning point to impact. In contrast, the right shoulder angle significantly differed between successful and unsuccessful putting strokes only during address. During successful and unsuccessful motions, the swing was executed with the moving displacement of the X-axis of the club head maintained almost constant along a straight light without back and forth movement. In the backswing segment, moving displacement of the Y- and Z-axes was greater in successful strokes than in unsuccessful strokes; however, this difference was very small for the Y-axis. The velocity of the club head for successful and unsuccessful motions significantly differed during address and at the turning point. The highest velocity of the ball was greater for successful than for unsuccessful putting strokes.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.485-490
• /
• 2020

Background: Meniscal tears are among the major risk factors for knee osteoarthritis progression. This study aimed to investigate the relationship between meniscal tears and work-related factors in the farming occupation. Methods: The participants included 486 farmers (238 men and 248 women), aged 40-69 years, who were among the 550 farmers registered in the Korea Farmer's Knee Cohort (KFKC). Data such as those on gender, age, body mass index (BMI), mechanical axis, cumulative heavy-lifting working time (CLWT), cumulative squatting working time (CSWT), and previous knee injury history were collected from the questionnaire, along with whole leg radiographic findings. Two radiologists assessed the magnetic resonance images of both knees to confirm the presence of meniscal tears. The factors related to meniscal tears were analyzed by multiple logistic regression. Results: A total of 54.5% of the farmers (48.7% of men and 60.1% of women) had meniscal tears. These tears were associated with gender, age, and BMI. We also identified an association between meniscal tears and CSWT, an especially important factor in farming [10,000-19,999 working hours, odds ratio = 2.16, 95% confidence interval (CI): 1.14-4.07, ≥20,000 working hours, odds ratio = 2.35, 1.45-3.80]. However, mechanical axis, knee injury history, and CLWT were not significantly related to meniscal tears. Conclusion: This study's findings show that squatting for long periods, as an occupational factor, is related to meniscal tears.

• Cross-Cultural Studies
• /
• v.26
• /
• pp.353-377
• /
• 2012

This treatise studies on how ideology and value of Chinese minority race undergo change according to social, political transition that the Chinese minority race has experienced for a long time and I also have tried to elucidate how these kinds of their experiences have been effected upon their own life, even it is part of my basic subjects for my study. Hence I would give weigh to focus on contemplating process of the past and the present rather than predictive discussion of how their pursuing value will be transformed. For my ebullient study, I'm willing to make Yi-Zu's moral culture become axis of my treatise, and capitalize on not only how Han-Zu's ideological philosopies have been disseminated, but also how acculturation have been taken place in Yi-Zu's moral culture system. Yi-Zu has the longest history and the greatest their own population, even the largest residence of various Chinese minority races. And Yun-Nan is the historical place where not only various Chinese minority races have lived, but also acculturation between Chinese majority, Han-Zu and them have been begotten. Above all, I would delve into traditional religion to understand Yi-Zu's moral culture as was already mentioned that it is my axis of treatise. Furthermore, I deliberated on how Taoism have been infiltrated Yi-Zu's moral culture, also how Han-Zu's ideological philosophies have been permeated Yi-Zu's, and what is more how to help themselves still remained in Yi-Zu's. Through my such these efforts, I analyze the aspect of embracing of Han-Zu's moral culture by Yi-Zu's and some facts of vicissitudes about it.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.7
• /
• pp.921-932
• /
• 2021

LINC01272 is a long non-coding RNA (lncRNA) that has been considered as a biomarker for many diseases including lung squamous cell carcinoma. Here, we investigated the function and mechanism of LINC01272 on lung cancer (LC). The differential expression of LINC01272 in LC and normal samples was analyzed by GEPIA based on the data from TCGA-LUAD database, as survival prognosis was analyzed through Kaplan-Meier Plotter. LINC01272 overexpression plasmid and miR-7-5p mimic were transfected into A549 and PC-9 cells. LINC01272, miR-7-5p and cardiolipin synthase 1 (CRLS1) mRNA expression was measured by quantitative reverse transcription-polymerase chain reaction. Cell viability was detected through MTT assay. Cell multiplication was evaluated by cell formation assay. Cell apoptosis was assessed through flow cytometry assay. Through bioinformatics, the target miRNA of LINC01272 and downstream genes of miR-7-5p were predicted. The targeting relationship was tested by dual luciferase reporter analysis. CRLS1, B-cell lymphoma-2 (Bcl-2), BCL2-associated X (Bax) and cleaved caspase-3 protein levels were detected through western blot. LINC01272 was downregulated in LC and low LINC01272 expression had poor prognosis. In A549 and PC-9 cells, LINC01272 inhibited cell viability and multiplication and induced apoptosis. LINC01272 negatively regulated miR-7-5p and CRLS1 was a target of miR-7-5p. MiR-7-5p reversed the effect of LINC01272 on viability, multiplication, apoptosis and expression of miR-7-5p and CRLS1 as well as apoptosis-related factors (Bcl-2, Bax and cleaved caspase-3). LINC01272 suppressed cell multiplication and induced apoptosis via regulating the miR-7-5p/CRLS1 axis in LC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1224-1230
• /
• 2020

Since the spread of smart phones, interest in wearable devices has increased and diversified, and is closely related to the lives of users, and has been used as a method for providing personalized services. In this paper, we propose a method to detect the user's behavior by applying information from a 3-axis acceleration sensor and a 3-axis gyro sensor embedded in a smartphone to a convolutional neural network. Human behavior differs according to the size and range of motion, starting and ending time, including the duration of the signal data constituting the motion. Therefore, there is a performance problem for accuracy when applied to a convolutional neural network as it is. Therefore, we proposed a Time-Division Feature Fusion Convolutional Neural Network (TDFFCNN) that learns the characteristics of the sensor data segmented over time. The proposed method outperformed other classifiers such as SVM, IBk, convolutional neural network, and long-term memory circulatory neural network.

• Clinical and Experimental Pediatrics
• /
• v.65 no.4
• /
• pp.172-181
• /
• 2022

Pubertal onset is known to result from reactivation of the hypothalamic-pituitary-gonadal (HPG) axis, which is controlled by complex interactions of genetic and nongenetic factors. Most cases of precocious puberty (PP) are diagnosed as central PP (CPP), defined as premature activation of the HPG axis. The cause of CPP in most girls is not identifiable and, thus, referred to as idiopathic CPP (ICPP), whereas boys are more likely to have an organic lesion in the brain. ICPP has a genetic background, as supported by studies showing that maternal age at menarche is associated with pubertal timing in their offspring. A gain of expression in the kisspeptin gene (KISS1), gain-of-function mutation in the kisspeptin receptor gene (KISS1R), loss-of-function mutation in makorin ring finger protein 3 (MKRN3), and loss-of-function mutations in the delta-like homolog 1 gene (DLK1) have been associated with ICPP. Other genes, such as gamma-aminobutyric acid receptor subunit alpha-1 (GABRA1), lin-28 homolog B (LIN28B), neuropeptide Y (NPYR), tachykinin 3 (TAC3), and tachykinin receptor 3 (TACR3), have been implicated in the progression of ICPP, although their relationships require elucidation. Environmental and socioeconomic factors may also be correlated with ICPP. In the progression of CPP, epigenetic factors such as DNA methylation, histone posttranslational modifications, and non-coding ribonucleic acids may mediate the relationship between genetic and environmental factors. CPP is correlated with short- and long-term adverse health outcomes, which forms the rationale for research focusing on understanding its genetic and nongenetic factors.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.48-55
• /
• 2023

In this study, on the structure simulation for manufacturing a high strength/light weight 48V battery housing for a mild hybrid vehicle was conducted. Compression analysis was performed in accordance with the international safety standards(ECE R100) for existing battery housings. The effect of plastic materials on compressive strength was analyzed. Three models of truss, honeycomb and grid rib for the battery housing were designed and the strength characteristics of the proposed models were analyzed through nonlinear buckling analysis. The effects of the previous existing rib, double-sided grid rib, double-sided honeycomb rib and double-sided grid rib with a subtractive draft for the upper cover on the compressive strength in each axial direction were examined. It was confirmed that the truss rib reinforcement of the battery housing was very effective compared to the existing model and it was also confirmed that the rib of the upper cover had no significant effect. In the results of individual 3-axis compression analysis, the compression load in the lateral long axis direction was the least and this result was found to be very important to achieve the overall goal in designing the battery housing. To reduce the weight of the presented battery housing model, the cell molding method was applied. It was confirmed that it was very effective in reducing injection pressure, clamping force and weight.