• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.375-380
• /
• 2000

Experimental and numerical studies were done to investigate seismic performance of slender sheat wall with no boundary confinement. 1/3 scale-specimens that model the plastic region of long slender shear walls subjected to combined axial load and bending moment were rested to investigate strength, ductility, capacity of energy dissipation and strain distribution. The experimental results show that the slender walls fail due to early crushing in the compressive boundary, and then have very low ductility. The measured maximum compressive strain is 0.0021, which is much less then 0.004 being commonly used for estimation of ductility. The experimental results indicates that the maximum compressive strain is not a fixed value but is affected by moment gradient along the shear wall height and distance from neutral axis to the extreme compressive fiber.

• Journal of the Korea Concrete Institute
• /
• v.12 no.5
• /
• pp.47-57
• /
• 2000

Experimental and numerical studies were done to investigate seismic performance of slender shear walls with no boundary confinement that are principal structural members of high0rise bearing wall buildings. 1/3 scale specimens that model the plastic region of long slender shear walls subjected to combined axial load and bending moment were tested to investigate strength, ductility, capacity of energy dissipation, and strain distribution, The experimental results show that the slender shear walls fail due to early crushing in the compressive boundary, and then have very low ductility. The measured maximum compressive strain is 0.0021, much less than 0.004 being commonly used for estimation of ductility. This result indicates that the maximum compressive strain is not a fixed value but is affected by moment gradient along the shear wall height and distance from the neutral axis to the extreme compressive fiber.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.37-44
• /
• 1997

Barium ferrite thin films on the thermal oxidized Si substrate were prepared by using sol-gel method (dip coating) from the sol of composition ratio of 5.25, designated by mole ratio 2Fe/Ba. The gelation process was largely divided into 4 step, and the sol prepared by reaction for 90 minutes at 8$0^{\circ}C$ was the suit-able for coating. Needle shaped particles formed on the coating layer were placed parallel to substrate and the inclination was increased with film thickness. The easy-direction of magnetization of needle shaped par-ticles was long-axis direction.

• Journal of computational fluids engineering
• /
• v.3 no.2
• /
• pp.27-38
• /
• 1998

Rotating flow of a stratified fluid contained in a circular cylinder with unstable temperature gradient imposed on the side wall of it has been numerically studied. The temperatures at the endwall disks are constant. The top disk of the container is coider than that of the bottob disk, as much as the temperature difference n${\Delta}$T, (0${\leq}$n${\leq}$3). Flows in the vessel are driven by an impulsive rotation of the hot bottom disk with respect to the central axis of the cylinder. Flow details have been acquired. For this flow, the principal balance in the interior core is characterized by a relationship between the radial temperature gradient and the vertical shear in the azimuthal velocity. As the buoyancy effect becomes appreciable, larger portions of the meridional fluid transport are long-circuit from the bottom disk to the interior region via the side wall.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.603-609
• /
• 2006

Tricyanopyrrolidene chromophores were prepared in order to compare their macroscopic nonlinear optical (NLO) properties with a conjugated structure through the long molecular axis. A thiophene or phenyl ring was tethered to an ethylenic bond; it may act as a lateral moiety to disrupt the planarity of a chromophore and lessen the electrostatic interaction. Thin film composites of these chromophores dissolved in amorphous polycarbonate (APC) were fabricated. Real time pole and probe method was employed to investigate the change of electro-optic (EO) signal during poling. The EO properties and their relaxation behaviors of the guest-host systems containing newly synthesized chromophores were investigated in detail.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1933-1935
• /
• 2002

In this paper, we present a study of the structure and electro-optic behavior of hybrid liquid-crystal-silica sphere composite photonic crystals, formed by filling the (26% by volume) void space of fee (face centered cubic) silica opals infiltrated with a nematic liquid crystal. Three dimensional photonic crystals of visible range were fabricated via a self assembly method of silica spheres of submicron diameter. The expected fee structure was confirmed by scanning electron microscopy (SEM) of the dehydrated crystal with glass removed. The photonic crystal exhibited significant electric-field-induced shift of the optical Bragg reflection peak when the liquid crystal has the long molecular axis oriented parallel to the sphere surfaces.

• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.90-93
• /
• 1995

Leaf blotch of Welsh onion was observed at a farmer's field at Kangnung in July 1990. Further collection o the diseased materials was made in 1993 and 1994. The symptom initially appeared as discolored spot and later yellowish blotch with the long axis parallel to the leaf veins, which turned to sooty colored concentric lesion due to heavy production of conidiophores and conidia. Cladosporium allii-cepae (Ranojevic) M. B. Ellis was repeatedly isolated from the leaf lesions. Healthy Welsh onion inoculated with conidial suspension of the fungus produced the typical symptom 10 days after inoculation. Koch's postulates were fulfilled by reisolation of the fungus. This is the first report of a Cladosporium leaf blotch of Welsh onion in Korea.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.236-238
• /
• 1990

For improving magnetic properties of the amorphous Fe-B-Si alloy, we annealed in a magnetic field oriented in the plane of the ribbon longitudinal to its long axis. By field annealing, coercive force and total core loss are reduced from 0.04 Oe to 0.02 Oe, and from 0.25 watt/kg to 0.15 watt/kg respectively comparing with non-field annealed specimen. These reductions were caused by the formation of $180^{\circ}$ domains parallel to the annealing field due to the induced anisotorpy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.560-560
• /
• 2012

We report a one-step fabrication method of Poly(9,9-dioctylfluorene) (PFO) nanowire array with pronounced ${\beta}$-Phase. We use liquid-bridge-mediated nanotransfer molding (LB-nTM) which is a new direct nano-patterning method based on the direct transfer of various materials from a mold to a substrate via liquid layer. The formation of the ${\beta}$-phase morphology in the resulting PFO nanowire array was evidenced by the presence of an absorption peak at 435nm. With the collection polarizer oriented parallel to the wire long axis, the PL emission was most intense and an emission dichroic ratio, DRE, of 3.7 was determined. The nanowire array have been investigated by scanning electron microscopy (SEM). Also, we simply fabricated structure of device of ITO/PFO nanowire arrays/Al and the electroluminescence spectra were recorded at various applied voltage.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.129-134
• /
• 2006

In this paper, actuator based on voice coil motor is designed and estimated to check the capability whether that system is in design specification or not. Design specification is moving range as $20{\times}20mm^2$ a along XY-axis in plane and maximizes bandwidth for high speed. The type of voice coil motor is selected with regarding design specification and minimizes the size of actuator. Flux density of designed voice coil motor is simulated. And PI controller is designed to maximize bandwidth of actuator. Finally, characteristic of designed actuator is simulated and that result reveals the validity of presented design.