• IE interfaces
• /
• v.18 no.4
• /
• pp.454-464
• /
• 2005

In Postal logistics, the efficient design and operation of transportation network is very important issue. But, it is hard to operate the postal transportation network flexibly according to the change of mail volume. In Korea post, a transportation plan is pre-determined and the transportation of mail is performed through the routes in the plan. When the routes cannot transport all mail, temporary vehicles are used. In the postal transportation, it is important to make a good transportation plan and to manage the plan efficiently. But the change of transportation plan is not a simple work because hundreds of vehicles and persons are related to the plan. So, a methodology to check the effect of the change of the transportation plan in advance is required. In this paper, we develop a simulation model to evaluate the performance of a postal transportation plan. We implement the simulation model and develop an information system including user interface for managing data and simulation results. We apply our simulation model and system to the real change of transportation plan.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.137-144
• /
• 2009

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This study suggest the quantitative modeling about total number of EPCIS event data under the assumption to aware the RFID tags of items, cases(boxes), vehicles(carriers, forklifts, auto guided vehicles, rolltainers) at a time on the reading points. We also estimate the number of created EPCIS event data by the suggested quantitative modeling under scenario of process in the integrated logistics center based on RFID system And this study compare the TO-BE model with the AS-IS model about the total sizes of created EPCIS event data using the simulation, in which we suggested the TO-BE model as the development of the repository by skipping the overlapped records.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.691-697
• /
• 2006

The objective of this study is to develop the alternative model of the container transport vehicle of high productivity for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Tractor), S/C(Straddle Carrier), SHC(Shuttle Carrier), and AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle presented in this study will usefully be apply to advanced container terminal with higher productivity in near future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.117-139
• /
• 1999

This paper is concerned about the hybrid tandem configuration as the design of the automated guided vehicle system(AGVs). The hybrid tandem configuration is that the manufacturing system is divided into several non-overlapping zones, workstations of each zone are linked by network configuration including loop. That is, the manufacturing system is divided into several non-overlapping small size networks, and at most two automated guided vehicles can be available in each network. The transit point is located at proper point between adjacent networks. The parts are transported to workstations in other network through the transit points. One of the objective functions in dividing into the hybrid tandem configuration is to minimize the maximum travel time of the divided networks, and other is to minimize the total travel distance of parts moved to workstations in other networks for the next processing. The model formulation is presented, and a numerical example is shown. Also, the performances of system for the hybrid tandem, tandem and network configuration are compared through the simulation. The results of this research will contribute to the development of material handling systems in the manufacturing system. Also, it will be applied in determining the transportation area of transportation vehicles and the number and size of the transportation fleet in the transportation problem of logistics management.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.367-372
• /
• 2006

The objective of this study is to develop the alternative of the container transport vehicle of new type for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Trailer), S/C(Straddle Carrier), SHC(Shuttle Carrier), AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle is presented in this study is very useful to advanced container terminal with higher productivity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.98-112
• /
• 2018

Intentional aggressive driving (IAD) is a very dangerous driving behavior that threatens to attack the adjacent vehicles. Most existing studies have focused on the independent driving characteristics of attack drivers. However, the identification of interactions between the offender and the victim is necessary for the traffic safety analysis. This study established multi-agent driving simulation environments to systematically analyze vehicle interactions in terms of traffic safety. Time-to-collision (TTC) was adopted to quantify vehicle interactions in terms of traffic safety. In addition, a exponential decay function was further applied to compare the overall pattern of change in crash potentials when IAD events occurred. The outcome of this study would be useful in developing policy-making activities to enhance traffic safety by reducing dangerous driving events including intentional aggressive driving.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.152-167
• /
• 2018

The high-speed weigh-in-motion system can collect the traveling speed and load information of individual vehicles, which can be used in a variety of ways for the traffic surveillance. However, it has a limit to apply the high-speed weigh-in-motion data directly to a safety analysis because high-speed weigh-in-motion's raw data are point measured data. In order to overcome this problem, this paper proposes a method to calculate the conflict rate and the Impulse severity based on surrogate safety measures derived from the detection time, detection speed, vehicle length, vehicle type, vehicle weight. It will be possible to analyze and evaluate the risk of rear-end collision on freeway traffic. In addition, this study is expected to be used as a fundamental for identifying crash risks and developing policies to enhance traffic safety on freeways.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.278-291
• /
• 2017

Effective installation and operations of traffic safety signs in the advance warning area is of considerable interest for safer traffic management at freeway work zones. This study evaluated the feasibility of traffic safety sign installation based on a driving simulation experiment to take drivers' responsive characteristics into consideration. Both the compliance rate for speed limit and a lane-changing safety index were used for evaluating a set of driving simulation scenarios. It was identified that providing speed limit signs to reduce speed in advance and afterward guiding lane-changing could lead to safer maneuvering of vehicles entering work zones. The outcomes of this study are expected to be useful for revising freeway work zone management policies toward crash prevention.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.8-17
• /
• 2006

Presented in this paper was to evaluate and improve the usability of a web-based logistics information system. The system was developed for the domestic company to track and monitor its own transportation vehicles and for the customers to check the current location of their packages by using Global Positioning System (GPS) and Short Massage Service (SMS). Since the initial system was developed under a tight schedule set by the company, the system designers and programmers did not focus on the usability of the system but on the functionality. Consequently, some usability problems of the system were discovered during the heuristic usability evaluation. This study was required to solve these usability issues. Usability problems of the initial system were identified and analyzed, and the user's requirements for the system were re-evaluated to meet the company's expectation. Several alternative designs were developed by fitted guidelines and then a updated system was developed. The updated system had an empirical usability test to find how much the initial system was improved from the heuristic evaluation. Two kinds of data were gathered during the tests: objective (completion time and number of errors) and subjects' preference. Data showed the updated system is better than the initial system in terms of usability. Presented in this paper includes introduction of the Usability evaluation, usability engineering process applied in this research, alternative design of GUI, usability test and results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2018

In South Korea, Jeju Island has a role as a test bed for electric vehicles (EVs). All conventional cars on the island are supposed to be replaced with EVs by 2030. Accordingly, how to effectively set up EV charging stations (EVCSs) that can charge EVs is an urgent research issue. In this paper, we present a case study on planning the locations of EVCS for Jeju Island, South Korea. The objective is to determine where EVCSs to be installed so as to balance the load of EVCSs while satisfying demands. For a public service with EVCSs by some government or non-profit organization, load balancing between EVCS locations may be one of major measures to evaluate or publicize the associated service network. Nevertheless, this measure has not been receiving much attention in the related literature. Thus, we consider the measure as a constraint and an objective in a mixed integer programming model. The model also considers the maximum allowed distance that drivers would detour to recharge their EV instead of using the shortest path to their destination. To solve the problem effectively, we develop a heuristic algorithm. With the proposed heuristic algorithm, a variety of numerical analysis is conducted to identify effects of the maximum allowed detour distance and the tightness of budget for installing EVCSs. From the analysis, we discuss the effects and draw practical implications.