• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.201-207
• /
• 2020

With the expansion in the use of DC power systems and increased need for system maintenance, the development of measurement devices for maintenance requires high stability. Of the different kinds of DC current measurement devices, the single-shot measurement device causes the input signal of the current measuring unit to initially generate a high inrush current. The high inrush current flows into the signal processor of the meter, shortening the life of the internal fuses and causing failure. Therefore, in this study, the I²t value for increasing the durability of the fuse is designed using the available wire diameter. Operating characteristics for 210~400% over-current of the rated current, which is relatively low over-current, are realized by the plating of low melting tin metal. As a result, a method of designing a fuse element for a DC power supply, which improves the safety of the DC current measurement device by blocking the failure caused by the inrush current, is presented.

• Asian Journal of Business Environment
• /
• v.5 no.4
• /
• pp.29-35
• /
• 2015

Purpose - This study intended to identify how resilience and character strength among employees are influenced by employment instability and the negative impact it could have on job satisfaction and psychological wellbeing. Research design, data, and methodology - This study hypothesizes that employment instability will have a negative effect on resilience and character strength, but resilience and character strength will have a positive effect on job satisfaction and psychological wellbeing. A total of 150 valid questionnaires were collected and utilized for analysis. Results - Employment instability was found to have a negative impact not only on job satisfaction and psychological wellbeing but also on employee resilience and character strength. Conclusion - The results suggest that along with the necessity for a strategic approach at the corporate level, enterprises should also acknowledge employee failures and support them in job situations. They should create a positive work environment and a structure of empowerment, interesting jobs, and a positive organizational culture to build various systems and the ability to enhance self-esteem and stamina in order to reinforce character strength.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.462-464
• /
• 2010

Logistic of port to use electronic document handling and trade electronic document EDI is used. Thus, EDI electronic documents system is electronic document processing system can handle. and the user wants to convert document formats, or extract the desired information the user should be able to use. Conversion of existing EDI documents and document conversion systems used in mapping the complexity of the grammar of the script, and it is difficult to use the operator. In this paper, efficient processing of EDI documents to electronic mapping of the existing operators in the grammar syntax to create an easy to use, more efficiency, increase operational management of EDI electronic document processing system is designed.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.127-128
• /
• 2011

본 논문에서는 Flow 모니터링 및 제어, Graph 출력, Test, History 등의 기능을 제공하는 연소기 제어 시스템을 설계하고 구현한다. Flow 모니터링 및 제어 기능은 각 채널의 현재 유량을 표시하고, 제어할 수 있다. Graph 출력 기능은 현재 채널의 상태를 그래프로 나타낸다. Test는 현재 구성된 환경이 정상적으로 동작하는지 시험하는 기능을 제공하며, Setting은 각 채널의 채널명, Point set, Range, 허용오차를 설정한다. 그리고 History는 저장된 데이터를 읽어와 Error기록, 사용자에 의해 저장된 데이터, 24시간마다 자동 저장되는 데이터를 그래프로 표시해 준다. 본 논문에서 제안한 연소기 제어 시스템을 이용해서 실제 유량을 측정한 결과, 정확한 유량의 측정을 할 수 있었다.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.9 no.4
• /
• pp.93-102
• /
• 2021

Purpose - Among the various pricing approaches used to set fares for express trains, this study explores a method of utilizing a customer-based pricing approach. The purpose of this study is to figure out how to apply the customer-based pricing approach to fares of new railway services using express trains. Research design, data, and methodology - This study was conducted through a literature review and case studies. In the literature review, we examined three approaches, focusing on the customer-based pricing approach and its application. In the case studies, we show how a customer-based pricing approach can be applied to determining the fares for railway services. Result - Some studies have used a customer-based pricing approach to set railway service rates, adapting the concepts of customer-based pricing such as demand, elasticity, value and willingness to pay. When setting fares of new railway services, it is recommended to use the customer-based approach in conjunction with other pricing approaches. Conclusion - This study demonstrates that a customer-based pricing approach is a promising tool in making decisions on railway fares. By applying a customer-based pricing approach to fares for new railway services using express trains, railway operators can utilize new service rates and increase the profitability of the railway business.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.426-433
• /
• 2019

After an earthquake, fire and gas explosions are more likely to cause more casualties in cities with many apartment buildings and large complex buildings. In order to prevent this, seismic design is necessary for the fire protection sprinkler system. However, most systems currently use stainless-steel pipes, although synthetic resin pipes are used in some special places. These materials are susceptible to vibration and earthquakes. This study evaluated the displacement absorption flexibility of polyethylene (PE) and aluminum (Al) multi-layered composite pipes to increase the seismic performance in a vibration environment and during earthquakes. The seismic performance was compared with that of a stainless-steel and PE pipes. The seismic characteristics can be measured by measuring the amount and extent of vibration transmitted by the sprinkler pipe. This method can be used to judge the seismic characteristics to attenuate the vibration during an earthquake. The seismic characteristics of the pipe were verified by comparing the logarithmic attenuation rate to the initial response displacement of the vibration generated by the transverse vibration measurement method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.8
• /
• pp.544-554
• /
• 2014

In this paper, we introduce a cyber-physical intersection systems (CPIS) which intimately interconnects roadside units (RSU) located at intersection, on-board units (OBU) of moving vehicles, and smartphone apps. Based on the architecture of CPIS, we also present a green light optimal speed advisory based on the reference mobility models (GLOSA-RMM) to reduce intersection stopping time (IST) and fuel consumption. Based on several reference mobility models, the GLOSA-RMM determines the appropriate speed advisory by taking into account the current mobility and the intersection traffic light status, and then provides screen/voice GLOSA instructions to minimize the driver's distraction. We show that the GLOSA-RMM can reduce both the IST and the fuel consumption through the numerical results obtained from the prototype of the CPIS consisting of the OBU, the RSU and the smartphone app.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.73-86
• /
• 2008

Because of its capability of automatic identification of objects, RFID(Radio Frequency Identification) technologies have extended their application areas to logistics, healthcare, and food management system. Load balancing is a basic technique for improving scalability of systems by moving loads of overloaded middlewares to under loaded ones. Adaptive load balancing has been known to be effective for distributed systems of a large load variance under unpredictable situations. There are needs for applying load balancing to RFID middlewares because they must efficiently treat vast numbers of RFID tags which are collected from multiple RFID readers. Because there can be a large amount of variance in loads of RFID middlewares which are difficult to predict, it is desirable to consider adaptive load balancing approach for RFID middlewares, which can dynamically choose a proper load balancing strategy depending on the current load. This paper proposes an adaptive load balancing approach for RFID middlewares and presents its design and implementation. First we decide a performance model by a experiment with a real RFID middleware. Then, a set of proper load balancing strategies for high/medium/low system loads is determined from a simulation of various load balancing strategies based on the performance model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.355-358
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.