• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.174-180
• /
• 2003

This study investigated the size selectivity of the round traps for greenling (Hexagrammos otakii) in the western sea of Korea. The selection curve for the greenling from the experiments on Oct. 2000 and Ar. 2001 was fitted by Kitahara's method to a polynomial equation and two parameter logistic selection curve. The selectio curve of the latter was more reasonable than that of the former. The equation of selectivity curve obtained using a logistic function with least square method was , s(R)=1/1+exp(-1.1169R+6.4565), where R=1/m, and 1 and m are total length and mesh size, respectively. The size selectivity curve showed that the current regulated mesh size(35mm) in case of the round trap was close to the L50 (37.0mm) of the selection curve for the biological minimum length (21.4cm) of the greenling.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.229-237
• /
• 2022

This study investigated the growth characteristics of four strains of newly developed synthetic Korean native commercial chickens (KNCs). We investigated a suitable growth curve model in KNCs and estimated the number of days to reach a 2 kg market weight. Body weight was measured at 2-week intervals from birth to 12 weeks of age. The growth curves were estimated using von Berteralanffy, Gompertz, and logistic functions. The results showed that males were significantly heavier than females at all ages, but there were no significant differences in body weight between strains, except at birth and 2 and 6 weeks of age. The coefficients of determination and adjusted determination of growth function had high goodness-of-fit (97.4~99.7). Of the growth curve parameters, the mature weight and growth ratio were higher in males than in females, but the maturity rate was similar in males and females. The inflection point occurred at approximately 7 weeks of age for females and 8 to 9 weeks of age for males. The weights estimated from the growth curve functions almost agreed with the actual weights, except for male weights estimated using the von Bertalanffy function. The coefficients of determination of the regression equations for weight to age were 0.9583 to 0.9746. The 8- and 10-week-old body weights estimated using the regression equation, and the 12-week-old weight estimated using the logistic function were most similar to the actual weight. Using these models, the estimated age of KNCs to reach 2 kg was 62.0~64.6 days for males and 74.9~78.6 days for females.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.539-545
• /
• 2018

Longitudinal Displacement Profile (LDP) is an appropriate tool for determination of the displacement magnitude of the tunnel walls as a function of the distance to the tunnel face. Some useful formulations for calculation of LDP have been developed based on the monitoring data on site or by 3D numerical simulations. However, the presented equations are only based on the tunnel dimensions and for different quality of rock masses proposed a unique LDP. In the present study, it is tried to present a new formulation, for calculation of LDP, on the basis of Rock mass quality. For this purpose, a comprehensive numerical simulation program was developed to investigate the effect of rock mass quality on the LDP. Results of the numerical modelling were analyzed and the least square technique was used for fitting an appropriate curve on the derived data from the numerical simulations. The proposed formulation in the present study, is a logistic function and the constants of the logistic function were predicted by rock mass quality index (GSI). Results of this study revealed that, the LDP curves of the tunnel surrounded by rock masses with high quality (GSI>60) match together; because the rock mass deformation varies over an elastic range.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.317-325
• /
• 2010

In this paper, we develop four modified empirical distribution function (EDF) type tests using approximate maximum likelihood estimators for the half-logistic distribution based on multiply Type-II censored samples. We also propose modified normalize sample Lorenz curve polt and new test statistics. We compare the above test statistics in the sense of the power for various censored samples. We present an example to illustrate this method.

• Journal of Korean Academy of Nursing
• /
• v.43 no.2
• /
• pp.154-164
• /
• 2013

Purpose: The purpose of this article is twofold: 1) introducing logistic regression (LR), a multivariable method for modeling the relationship between multiple independent variables and a categorical dependent variable, and 2) examining use and reporting of LR in the nursing literature. Methods: Text books on LR and research articles employing LR as main statistical analysis were reviewed. Twenty-three articles published between 2010 and 2011 in the Journal of Korean Academy of Nursing were analyzed for proper use and reporting of LR models. Results: Logistic regression from basic concepts such as odds, odds ratio, logit transformation and logistic curve, assumption, fitting, reporting and interpreting to cautions were presented. Substantial shortcomings were found in both use of LR and reporting of results. For many studies, sample size was not sufficiently large to call into question the accuracy of the regression model. Additionally, only one study reported validation analysis. Conclusion: Nursing researchers need to pay greater attention to guidelines concerning the use and reporting of LR models.

• The Korean Journal of Applied Statistics
• /
• v.27 no.3
• /
• pp.445-459
• /
• 2014

As a certain job is repeatedly done by a worker, the outcome comparative to the effort to complete the job gets more remarkable. The outcome may be the time required and fraction defective. This phenomenon is referred to a learning-curve effect. We focus on the parametric modeling of the learning-curve effects on count data using a logistic cumulative distribution function and some probability mass functions such as a Poisson and negative binomial. We conduct various simulation scenarios to clarify the characteristics of the proposed model. We also consider a real application to compare the two discrete-type distribution functions.

• Journal of the Korean Society of Tobacco Science
• /
• v.3 no.2
• /
• pp.109-114
• /
• 1981

This experiment was conducted with three varieties (Hicks, Burley 21, Sohyang) and cropping systems (Improved mulching, Mulching, Non mulching) of NC 2326 to analyze growth kinetics by means of growth function involving its velocity and accelerated velocity. The basic growth data were obtained by harvest method at interval of ten days from transplanting to hundred days and analyzed by , regression equation, determinant of matrix, and differentiation. The plot of total dry weight of leaves, stalk and roots per a plant vs. time forms a sigmoid curve and its function fitted logistic satisfactorily. Tobacco plant grows at an accelerated velocity. And growth velocity, symmetric about an inflection point, is proportional to biomass attained and to the difference between biomass attained and the maximum, and to the decrease according to the biomass. Of varieties and cropping systems, the most maximum velocity was 9.58g per day per plant in mulching cultivation of NC 2326 and maximum accelerated velocity was 264mg per $day^2$ per plant in Burley 21.

• Communications for Statistical Applications and Methods
• /
• v.16 no.6
• /
• pp.1005-1012
• /
• 2009

The area under the curve(AUC) is commonly used as a measure of the receiver operating characteristic(ROC) curve which displays the performance of a set of binary classifiers for all feasible ratios of the costs associated with true positive rate(TPR) and false positive rate(FPR). In the bipartite ranking problem where one has to compare two different observations and decide which one is "better", the AUC measures the quantity that ranking score of a randomly chosen sample in one class is larger than that of a randomly chosen sample in the other class and hence, the function which maximizes an AUC of bipartite ranking problem is different to the function which maximizes (minimizes) accuracy (misclassification error rate) of binary classification problem. In this paper, we develop a way to construct the unified framework for AUC maximizer including support vector machines based on maximizing large margin and logistic regression based on estimating posterior probability. Moreover, we develop an efficient algorithm for the proposed unified framework. Numerical results show that the propose unified framework can treat various methodologies successfully.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.247-254
• /
• 2004

The mesh selectivity of the drum net fish trap for elkhorn sculpin(Alcichthys alcicornis) in the estern sea of Korea was described. The selection curve for the elkhorn sculpin caught from the experiments between June 2003 and December 2003 was by SELECT(Share Each Length Class's Catch Total)model and by Kitahaa's method to a polynomial equation and two parameter logistic selection curve. The selection curve by SELECT model showed to be equal probability of entrance of the elkhorn sculpin in the large(55mm) and small(20mm) mesh traps by minimum AIC (Akaike Information Criteria). The equation of selectivity curve obtained by Kitahara's method using a logistic function with least square method was $s(R)\;=\;\frac{1}{1+exp(-0.3545R+2.141)$, where R=1/m, and/and m are total length and mesh size, respectively. The mesh selectivity curve showed that the current regulated mesh size(35mm) for the trap was corresponded to 21.4cm in the $L_{50}$of the selection curve for the elkhorn sculpin.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.95-104
• /
• 2006

The DMZ is a 248km long thin green line which has various landscapes of fields, hills and mountains. This study focused on western part of DMZ and vicinity which consist of abandoned rice paddy, wetlands and fields. The main purpose of this study is to detect the vegetation vitality from the western part of MDL to DMZ vicinity and identify and quantify ecological buffer(ecotone) width adopting logistic function derived from 'Vegetation Index-distance curve' using an Landsat ETM+ image acquired on June of 2002. Green leaf vegetation was quantified to identify the ecotone buffer in western DMZ and vicinity(civilian control area: CCA) using Transformed Vegetation Index(TVI) which is one of common measurement among various indices. Vegetation measurement from Military Demarcation Line(MDL) to vicinity area was investigated at 500m intervals to 10kms of southern and northern part of western DMZ and vicinity. The Logistic function models the sigmoid curve of growth with three stages of growth of initial competition and maturity. In the TVI-distance logistic curve, the maturity is high vegetation vitality, the competition is vitality changing, and the initial is low vitality. In the TVI-distance curve, maturity area of high TVI value is core area for ecological conservation, and the competition area between inflection points can be an ecotone(ecological buffer). In case of southern part, maximum TVI value is 221.92 and minimum is 207.16, and maximum TVI of northen part is 215.32 and minimum is 188.35. That means forest devastation of north Korean part of DMZ and vicinity is severer than that of south Korea. The width of core area for ecological conservation is 2,311m, and ecotone in the southern part is 5,339m, so minimum width from MDL for ecological conservation can be computed as 7,651m. In case of Northern part, the width of core area is 1,841m, and ecotone buffer is 5,014m, so ecological conservation width can be estimated as 6,855m. In case of northen part, width of estimated core area is less than that of DMZ width, which means ecological disturbance is very severe in northern part of western DMZ.