• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.31-40
• /
• 1989

Five novel amphoteric surfactants of N-acyloxyethylcarboxybetaine series were synthesized via Schotten-Baumman reaction between five acid chlorides containing 10, 12, 14, 16 and 18 carbon atoms in their N-alkyl groups and dimethylaminoethanol to give the intermediate products, 2-dimethylaminoethylalkanoates(2). Quaternization of these products(2) was permitted to from 2-(acyloxyethyldimethylammonic)- acetates(3), whose structures were identified by elemental analysis, IR spectrophotometry and $^1Hnmr$ spectrometry. The yield of the final products was shown in the range of 77-80% based on the intermediate products. The surface tension of the aqueous solution of (3) was measured, and the critical micelle concentrations (cmc) were shown in the range of $2.1\;{\times}\;10^{-3}\;-\;3.3\;{\times}\;10^{-4}mol/l$, and the surface tension at cmc was 28-36 dyne/cm. Cmc was lowered gradually by the increment of the length of N-alkyl ester containing group. The isoelectric point was shown in the range of 4.44-5.20. It showed a tendency to lean toward the acidic site and its range was broadened as increase of the hydrophobic group length. A linear relationship between log cmc and the number of carbon atoms(N) in the hydrophobic alkyl chain was shown in the relative equation of log cmc=-1.75-0.1N, and the contribution rate of N on the standard free energy change in micellization, ${\bigtriangleup}({\bigtriangleup}G^{\circ}m)/{\bigtriangleup}N$, was calculated as -0.23 RT.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1089-1096
• /
• 2002

Solvolyses rate constants of trimethylacetyl chloride (2), isobutyryl chloride (3), diphenylacetyl chloride (4) and p-methoxyphenylacetyl chloride (5) in 2,2,2-trifluoroethanol (TFE)-water, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-water and TFE-et hanol solvent systems at $10^{\circ}C$ are determined by a conductimetric method. Kinetic solvent isotope effects (KSIE) are reported from additional kinetic data for methanolyses of various substituted acetylchlorides in methanol According to the results of those reactions analyzed in terms of rate-rate profiles,extended Grunwald-Winstein type correlations, application of a third order reaction model based a general base catalyzed (GBC) and KSIE values. Regardless of the kind of neighboring groups (CH3- or Ph-groups) of reaction center, for aqueous fluorinated alcohol systems, solvolyses of 2, 3, 4, and 5 were exposed to the reaction with the same mechanism (a loose SN2 type mechanism by electrophilic solvation) controlled by a similarity of solvation of the transition sate (TS). Whereas, for TFE-ethanol solvent systems, the reactivity depended on whether substituted acetyl chloride have aromatic rings (Ph-) or alkyl groups (CH3-); the solvations by the predominant stoichiometric effect (third order reaction mechanism by GBC and/or by push-pull type) for Ph- groups (4 and 5) and the same solvation effects as those shown in TFE-water solvent systems for CH3- groups (2 and 3) were exhibited Such phenomena can be interpreted as having relevance to the inductive effect ( $\sigmaI)$ of substituted groups; the plot of log (KSIE) vs. ${\sigma}I$ parameter give an acceptable the linear correlation with r = 0.970 (slope = 0.44 $\pm$ 0.06, n = 5).

• Journal of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.444-451
• /
• 1987

The dependence of polarographic parameters on the pressure for the reduction of copper(II), cadmium(II), and zinc(II) complex ions with ethylenediamine, propylenediamine, and diethylenetriamine has been studied. In this study the dropping mercury electrode, the mercury pool electrode, and helix type of platinum wire were used as the working, the reference, and the auxilary electrode, respectively. With increasing the pressure from 1 atmosphere to 1,500 atmospheres, the reduction half-wave potentials of metal complex ions are shifted to the negative values and the diffusion currents become considerably larger, in keeping with the theory on the change of the physical properties of the electrolytic solution such as the density, the viscosity, the dielectric constant, and the electrical conductance, etc. The slope values of the logarithmic plot are increased with increasing the pressure, which indicates the more irreversible reduction. The temperature coefficients of diffusion current observed over the range of the temperature from 25$^{\circ}$C to 35$^{\circ}$C are about two percentage with increasing the pressure, therefore the polarographic reduction under the high pressure is controlled by diffusion. The linear relationships between diffusion current and concentration of metal complex ions are established over all pressure range.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.131-138
• /
• 2012

PURPOSES : Two-lane highways have one lane in each direction, and lane changing and passing maneuvers take place in the opposing lane depending on the availability of passing sight distance. 2001 Korea Highway Capacity Manual (KHCM) is classified into two classes of two-lane highways (Type I, II), and average travel speed and time-delayed rate are used as measures of effectiveness (MOEs). However, since existing two-lane highways have both uninterrupted and interrupted traffic flow-system elements, a variety of free-flow speeds exhibits in two-lane highways. In addition, it is necessary to check if the linear-relationship between volumes and time-delayed rate is appropriate. Then, this study is to reestablish the relationship between average travel speed, time-delayed rate, and flow. METHODS : TWOPAS model was selected to conduct this study, and the free-flow speeds of passenger cars and the percentage of following vehicles observed in two-lane highways were applied to the model as the input. The revised relationships were developed from the computer simulation. RESULTS : In the revised average travel speed vs. flow relationship, the free-flow speed of 90km/h and 70km/h were added. It shows that the relationship between time delayed-rate and flow appeared to be appropriate with the log-function form and that there was no difference in time-delayed rate between the free flow speeds. In addition to revise the relationships, the speed prediction model and the time-delayed rate prediction model were also developed. CONCLUSIONS : The revised relationships between average travel speed, time-delayed rate, and flow would be useful in estimating the Level of Service(LOS) of a two-lane highway.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.1
• /
• pp.205-216
• /
• 2015

Background: Many developing countries are lagging behind in reporting epidemiological data for individual central nervous system (CNS) tumors. This paper aimed to elicit patterns for the epidemiology of individual World Health Organization (WHO) classified CNS tumors in countries registered by WHO as "developing". Materials and Methods: Cyber search was carried out through 66 cancer networks/registries and 181 PubMed published papers that reported counts of CNS tumors for the period of 2009-2012. The relationship between the natural log of incidence Age Standardized Rate (ASR) reported by Globocan and Latitude/ Longitude was investigated. Results: Registries for 21 countries displayed information related to CNS tumors. In contrast tends for classified CNS tumor cases were identified for 38 countries via 181 PubMed publications. Extracted data showed a majority of unclassified reported cases [PubMed (38 countries, 45.7%), registries (21 countries, 96.1%)]. For classified tumors, astrocytic tumors were the most frequently reported type [PubMed (38 countries, 1,245 cases, 15.7%), registries (21 countries, 627 cases, 1.99%]. A significant linear regression relationship emerged between latitudes and reported cases of CNS tumors. Conclusions: Previously unreported trends of frequencies for individually classified CNS tumors were elucidated and a possible link of CNS tumors occurrence with geographical location emerged.

• Clinical and Experimental Reproductive Medicine
• /
• v.48 no.2
• /
• pp.163-173
• /
• 2021

Objective: This study aimed to characterize a validated model for predicting oocyte retrieval in controlled ovarian stimulation (COS) and to construct model-based nomograms for assistance in clinical decision-making regarding the gonadotropin protocol and dose. Methods: This observational, retrospective, cohort study included 636 women with primary unexplained infertility and a normal menstrual cycle who were attempting assisted reproductive therapy for the first time. The enrolled women were split into an index group (n=497) for model building and a validation group (n=139). The primary outcome was absolute oocyte count. The dose-response relationship was tested using modified Poisson, negative binomial, hybrid Poisson-E_max, and linear models. The validation group was similarly analyzed, and its results were compared to that of the index group. Results: The Poisson model with the log-link function demonstrated superior predictive performance and precision (Akaike information criterion, 2,704; λ=8.27; relative standard error (λ)=2.02%). The covariate analysis included women's age (p<0.001), antral follicle count (p<0.001), basal follicle-stimulating hormone level (p<0.001), gonadotropin dose (p=0.042), and protocol type (p=0.002 and p<0.001 for short and antagonist protocols, respectively). The estimates from 500 bootstrap samples were close to those of the original model. The validation group showed model assessment metrics comparable to the index model. Based on the fitted model, a static nomogram was built to improve visualization. In addition, a dynamic electronic tool was created for convenience of use. Conclusion: Based on our validated model, nomograms were constructed to help clinicians individualize the stimulation protocol and gonadotropin doses in COS cycles.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.608-614
• /
• 1985

Electrical conductivities of $ZrO_2-Sm_2O_3$ systems containing 10, 20, 30, 40, and 50 mol% of $ZrO_2$ have been measured as a function of temperature and of oxygen partial pressure at temperature from 500 to 1000${\circ}C$ and oxygen partial pressures from 1 ${\times}10^{-5}to 1{\times}10^{-1}$ atm. Plots of log conductivity vs. 1/T are found to be linear with an inflection point at around 650$^{\circ}C$ and the temperature dependence of conductivity shows two different defect structures. The conductivities are increased with increasing pressure, slowing a p-type character. The electrical conductivity dependences on $Po_2$ are found to be ${\sigma}{\propto}Po_2^{1/5.3}$ at 650∼1000$^{\circ}C$ and ${\sigma}{\propto}Po_2^{1/6}$ at 500∼650$^{\circ}C$, respectively, The defect structures are Oi" at 650-1000$^{\circ}C$ and $Vs_m$"' at 500-650$^{\circ}C$. The electron hole is main carrier type, however ionic contribution is found at low temperature portion. Ionic contributions increased with the increasing amount of $ZrO_2$ dopant. In 60mol% $ZrO_2-Sm_2O_3$ system, the conductivity is increased with decreasing oxygen pressure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.119-126
• /
• 1983

The purposes of this study are to analyze/model the mode choice behavior of the regional traveler by express bus/express train and to offer useful source in deciding the public transportation policy. The data analyzed were trips of both modes from March, 1980 to November, 1981, between Seoul and other nineteen cities; the data were grouped as five groups according to the change of service variables. Service variables were travel time(unit: minute), cost(:won), average allocation time(:won), service hour(:hour), and dummy variables by mode. As model Logit Model with linear or log utility function were postulated. As the result of this study, some reseanable models were constructed at Model Type I(eq. 2. of this paper) based on the above data except the dummy. It was judged that the parameters calibrated by Group III and Group IV data in table 4, were optimal. Among the parameters, the parameter of travel cost was most reliable. There was a tendency preferring express bus to train in October and November. With the constructed model and Pivot-Point Method. the demand change of express train caused by the service variables' change could be forecasted over 99%.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.355-367
• /
• 1989

This study examined the physical and mental health factors affecting the industrial accidents of 142 injured and 1,212 uninjured workers in the shipbuilding industry from 1986 to 1988. The results acquired from the Todai Health Index (THI) and from analysis of the health examination were as follows: 1. Among the personal characteristics of the workers, the educational level of injured workers was significantly lower than that of the uninjured workers. 2. Among the physical characteristics, vision and $R\ddot{o}hrer$ Index of the injured workers were lower than those of the uninjured workers, and the difference was statistically significant. On the other hand, the differences in height, weight, hearing function, hematocrit, blood pressure, urine test, and X-ray findings were not statistically significant between the injured and uninjured workers. 3. The score of the THI questionnaire on the physical and mental health of the injured workers was higher than that of the uninjured workers, and the difference was statistically significant. 4. Form the THI score, the industrial workers had complained more about mental health than physical health and there was a statistically singinficant relation with the industrial accidents. 5. The relative risk expressed in terms of the odds ratio was 2.9 for poorer vision, 2.7 for a lower educational level, 2.2 for a higher THI score and 1.6 for overdrinking. 6 Educational level, vision, and the THI score were selected as significant factors influencing industrial accidents based on a log-linear model. According to the results of this model by logistic analysis, the odds ratio of industrial accidents was 1.8 for a lower educational level, 1.7 for poorer vision, and 1.6 for a higher THI score. 7 By event history analysis with the dependent variable as the duration of work at the time of the industrial accident, educational level, age, $R\ddot{o}hrer$ Index and THI score were the statistically significant variables selected, and the hazard rate of industrial accident occurrence was 0.24 for a lower educational level, 0.92 for age, 0.99 for a lower $R\ddot{o}hrer$ Index and 2.72 for a higher THI score. As we have seen, educational level and THI score were the most significant factors affecting the hazard rate of industrial accidents. Vision, $R\ddot{o}hrer$ Index, age, and drinking behavior were also statistically significant variables influencing industrial accidents. Therefore, in order to prevent industrial accidents, it is necessary to establish a health management plan for industry which can objectively evaluate not only the physical but also the mental health of the workers. If we use this type of study as a prospective study design, we can determine the relative risk of physical and mental health factors on industrial accidents. Furthermore, it is expected that this type of study will provide workers at high risk with more precise basic data for a health managment plan for industrial accident prevention.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.73-73
• /
• 2018

Bacterial leaf blight(BLB), caused by X. oryzae pv. oryzae(Xoo), is one of the most destructive diseases of rice due to its high epidemic potential. Understanding BLB resistance at a genetic level is important to further improve the rice breeding that provides one of the best approaches to control BLB disease. In the present investigation, a collection of 192 accessions was used in the genome-wide association study (GWAS) for BLB resistance loci against four Korean races of Xoo that were represented by the prevailing BLB isolates under Xoo differential system. A total of 192 accessions of rice germplasm were selected on the basis of the bioassay using four isolated races of Xoo such as K1, K2, K3 and K3a. The selected accessions was used to prepare 384-plex genotyping by sequencing (GBS) libraries and Illumina HiSeq 2000 paired- end read was used for GBS sequencing. GWAS was conducted using T ASSEL 5.0. The T ASSEL program uses a mixed linear model (MLM). T he results of the bioassay using a selected set of 192 accessions showed that a large number of accessions (93.75%) were resistant to K1 race, while the least number of accessions (34.37%) resisted K3a race. For races K2 and K3, the resistant germplasm proportion remained between 66.67 to 70.83%. T he genotypic data produced SNP matrix for a total of 293,379 SNPs. After imputation the missing data was removed, which exhibited 34,724 SNPs for association analysis. GWAS results showed strong signals of association at a threshold of [-log10(P-value)] more than5 (K1 and K2) and more than4 (K3 and K3a) for nine of the 39 SNPs, which are plausible candidate loci of resistance genes. T hese SNP loci were positioned on rice chromosome 2, 9, and 11 for K1 and K2 races, whereas on chromosome 4, 6, 11, and 12 for K3 and K3a races. The significant loci detected have also been illustrated, NBS-LRR type disease resistance protein, SNARE domain containing protein, Histone deacetylase 19, NADP-dependent oxidoreductase, and other expressed and unknown proteins. Our results provide a better understanding of the distribution of genetic variation of BLB resistance to Korean pathogen races and breeding of resistant rice.