• 한국산림과학회지
• /
• 제97권5호
• /
• pp.485-491
• /
• 2008

This study was performed in 14 unthinned Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantations in northeast China. Data were collected on 70 sample trees of different canopy position with diameter at breast height (DBH) ranging from 6.9 cm to 34.5 cm. Diameter and length of knots per whorl below the living crown were studied by different vertical levels divided by relative knot height (RHK) in this paper. Models taking DBH and height to the crown base (HCB) as independent variables were developed to predict knot diameter (KD) in a sample whorl. According to the vertical distribution tendency and range of sound knot length (KLsound), KLsound was modeled as multiple linear function of DBH, KD and relative knot height (RHK). The loose knot length (KLloose) was described as a function of DBH, KD and height above the ground for knots (HK) in a mixed log-linear model. Results from this study can provide abundant knot information so as to describe the knot size and vertical distribution tendency of Mongolian pine plantation.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.59-65
• /
• 2002

EYM (European Yield Model), which was adopted in NDS (National Design Specification for wood construction), has been used in Korea without any verification of the analysis of bolted wood connections. In the case of applying lumber from domestic small diameter logs, however, there are some problems with the direct application of EYM ; 1) relatively low dowel bearing strength and dimensional stability due to a large amount of immature wood, 2) effect of MC (moisture contents) on the dowel bearing strength of wood and the yield load of a bolted connection. To evaluate the strength properties of bolted connections with lumber from domestic small diameter logs, effect of MC on the dowel bearing strength of wood was investigated and double shear bolted connection tests were performed. As the MC of wood increased, the dowel bearing strength was linearly reduced, even under 19% MC, which showed that adjustment, not considered in NDS, was required. Double shear bolted connection tests indicated that effect of MC on yield load should be considered in order to determine design value.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.197-202
• /
• 2007

This study is conducted to investigate the factors affecting lumber conversion rate of sawmill industry in South Korea. Data were obtained from the survey of 38 sawmills in all geographic regions of South Korea. The variables examined in this study were region, softwood/hardwood log, domestic/imported/both log, the number of power-driven carriages (PDC) installed, the year when and country where PDCs was manufactured, the horse power of PDC, the number of labors required to operate each PDC, the sawing capacity of mill (mill size), and the types of major product and by-products. The lumber recovery factor (LRF) of sawmills were significantly influenced by the origin of logs, level of PDC automation, sawmill size, and size of logs (measured in diameter and length) while not by the location of the mill, types of major product and by-product, log species, and characteristics of PDC. Although these results provide useful information for understanding the technological characteristics of the Korean sawmill industry, further investigation with larger sample is necessary to reveal the more reliable characteristics of sawmill industry in South Korea.

• 한국균학회지
• /
• 제38권1호
• /
• pp.25-28
• /
• 2010

Di-mon 교잡에 의해 만들어진 표고품종 산림7호를 원목 재배한 결과, 1년 중 가을발생이 가장 많았으며, 생표고용으로 적합하였다. 발생된 버섯은 평반구형이며, 갓의 직경은 47mm 정도 되었다. 주름살 측면은 평활형이며, 폭은 좁았다. 버섯발 이온도는 평균 $11{\sim}23^{\circ}C$였고, 산발발생하는 경향이 있었다. 그리고 4년간 생산된 버섯량은 골목 1본당 약 1.4 kg이었다.

• 한국재료학회지
• /
• 제4권8호
• /
• pp.927-933
• /
• 1994

비구형 입자들의 크기와 형태에 따른 침강 특성의 영향을 검토하였다. 비구형입자를 포함하는 서스펜션의 침강에서 $log \mu_{c}$대 $log \varepsilon$로부터 얻은 기울기 지표n값은 형태와 크기가 다른 입자는 같은 부피 농도에서 흡착되는유체량이 달라져 입자크기가 감소하거나 불균일한 경우 증가하는 경향을 나타내었다. 실험결고 비구형입자를 포함하는 서스펜션의 침강에서 기울기 지표 $n_{i}$값에 대하여 $n_{i}=n(a+b/d_{v})$와 같은 식을 얻었으며 이때 a, b는 입자형태에 따른 상수이다.

• 자원환경지질
• /
• 제27권3호
• /
• pp.289-294
• /
• 1994

This paper describes an effective utilization method of well logging data and boring cores for understanding the geology of Keoje-do area. Six holes were drilled in 1988-1989, and all rock cores were recovered. Nevertheless, seven kinds of logs were carried out in each borehole. The geologic situations of the drilling sites are accurately evaluated from a comparison between core descriptions and well logging data. Porosities and clay contents of sedimentary rocks can be calculated using the data of density and gamma-ray logs. Fractured zones are easily detected from the change in inside diameter of borehole by caliper log. Sonic, density and gamma-ray logging data clearly indicate alternated and dyke zones; the former can be detceted from an acoustic wave attenuation and a decline of compaction by sonic and density logs, the latter can be detected from the amount of potassium contents of bed rock and dyke by gamma-ray log.

• 한국분무공학회지
• /
• 제5권1호
• /
• pp.30-40
• /
• 2000

The characteristics of liquefied butane spray are expected to be different from conventional diesel fuel spray, because a kind of flash boiling spray is expected when the back pressure is below the saturated vapor pressure of the butane(0.23MPa at 298K). The ambient pressure was held at a pressure above(0.37MPa) and below(0.15MPa) the fuel vapor pressure. The axial velocities, radial velocities, and size distributions in butane sprays were measured with PDPA(Phase Doppler Particle Analyzer) system. The PDPA measurement showed a smaller SMD at the 0.15MPa chamber pressure, compared to the 0.37MPa case. Log-hyperbolic density function for the droplets size distribution can be fitted to the experimental results of a liquefied butane spray.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권6호
• /
• pp.12-19
• /
• 2003

This paper presents the effect of boundary conditions in various failure pressure models published for the estimation of failure pressure. Furthermore, this approach is extended to the failure prediction with the aid of a failure probability model. The first order Taylor series expansion of the limit state function is used in order to estimate the probability of failure associated with each corrosion defect in buried pipelines for long exposure period with unit of years. A failure probability model based on the von-Mises failure criterion is adapted. The log-normal and standard normal probability functions for varying random variables are adapted. The effects of random variables such as defect depth, pipe diameter, defect length, fluid pressure, corrosion rate, material yield stress, material ultimate tensile strength and pipe thickness on the failure probability of the buried pipelines are systematically investigated for the corrosion pipeline by using an adapted failure probability model and varying failure pressure model.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.22-30
• /
• 2003

This study was performed to obtain the basic data for high quality timber production and efficient utilization by investigating the effect of pruning on timber quality of domestic plantation-grown Korean pine (Pinus koraiensis Sieb. et Zucc.). The results were summarized as follows:Dead knots (unsound knots) in the pruned logs occurred more at upper parts when compared with in non-pruned ones. The numbers of knots on surface in heavily pruned trees were less than those in non-pruned trees, but there was no significant difference in moderately pruned trees. The required period to reveal clear timber surface without defects after pruning increased proportionally with the increase of knot diameter. The yield of clear lumber production increased by about 10% after 14 years from moderate pruning. The quality grade of log improved with more pruning practices. Knots appeared the most important factor in lowering the log grades.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권5_6호
• /
• pp.319-323
• /
• 2003

이차원 평면에 주어진 n개의 점 집합 P에 대한, 최소 신장 트리(minimum spanning tree, MST)는 P의 점들을 연결한 신장 트리 중에서 에지 길이의 총합이 최소가 되는 트리로 정의된다. P에 대한 신장 트리의 지름(diameter)은 트리의 두 점을 연결한 트리 경로 중에서 최장 경로의 길이로 정의되며, 최소 지름 신장 트리(minimum-diameter spanning tree, MDST)는 P에 대한 신장 트리 중에서 지름이 가장 작은 트리를 의미한다. 현재까지 알려진 가장 좋은 알고리즘[3]은 MDST를 O(n$^3$) 시간에 구한다. 본 논문에서는 MDST의 지름보다 최대 5/4배 이내의 지름을 보장하는 신장 트리를 구하는 $O(n^2)$ 시간 근사 알고리즘(approximation algorithm)을 제시한다. 이것은 MDST 문제에 관한 첫 번째 근사 알고리즘이다.