• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.607-608
• /
• 2008

Locking time of the DLL is the important design issue in case of clock gating for low power system. For precise analysis of the locking speed of the DLL, this paper analyzes the locking process of the DLL in time domain. Analysis result shows that the value of the DLL bandwidth over reference frequency should be limited to below 1 ($i.e.w_n/F_{REF}<1$) for the stable operation and relation between bandwidth and lock time is expressed by log function.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.119-128
• /
• 1995

We report hybrid and passive mode-locking results of tilted-stripe AlGaAs semiconductor laser traveling wave amplifiers with saturable absorbers. Dependence ofthe pulse width on the mode locking frequency, the bandwidth of spectral filters, and the bias current of the laser amplifier are investigated. We generate 4 ps optical pulses by using the hybrid mode locking technique. The repetition rate and the peak power of generated pulses are 516 MHz and 170 mW, respectively. The tuning range of uor mode locked laser is 10 nm with the center wavelength of 780 nm. We also generate 2.6 ps optical pulses with peak power of 830 mW by using the passive mode locking technique.

• 한국가구학회지
• /
• 제20권2호
• /
• pp.122-135
• /
• 2009

The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1891-1898
• /
• 1999

Traditional syntax-oriented serializability notions are considered to be not enough to handle in particular various types of transaction in terms of duration of execution. To deal with this situation, altruistic locking has attempted to reduce delay effect associated with lock release moment by use of the idea of donation. An improved form of altruism has also been deployed in extended altruistic locking in a way that scope of data to be early released is enlarged to include even data initially not intended to be donated. In this paper, we first of all investigated limitations inherent in both altruistic schemes from the perspective of alleviating starvation occasions for transactions in particular of short-lived nature. The idea of two-way donation locking(2DL) has then been experimented to see the effect of more than single donation in distributed database systems. Simulation experiments shows that 2DL outperforms the conventional two-phase locking in terms of the degree of oncurrency and average transaction waiting time.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.462-470
• /
• 2016

The locking load of a conventional manhole depends on the weight of its cover. Locking-type manhole structures with a special locking mechanism were recently developed to prevent accidents such as stolen cover, away cover from a frame. The weight of the manhole structure can be reduced under structural safety because the locking force of a locking-type manhole is greater than the weight of the cover. A light-weight manhole cover is developed in this study by using a finite element stress analysis and the design of experiments. Static stress analysis and fracture experiments are also conducted to analyze the states of the initial product. The optimum light-weight manhole cover considering manufacturing molds is developed and tested. Consequently, the weight was found to reduce by 16%. In addition, the fracture load increased by 38%.

• Clinics in Shoulder and Elbow
• /
• 제8권2호
• /
• pp.117-121
• /
• 2005

A secure slip knot is very important in the arthroscopic surgery of the shoulder joint. The new 'Hallym Slider', developed by the first author(KCN), has the properties of being a simple sliding and one-way locking knot. This technique can be performed alone without an assistant and has no accidental premature locking during the knot tying. The initial slip knot determines the adequacy of tissue approximation and consequent healing. The 'Hallym Slider' has excellent initial holding capacity, maintaining tension on soft tissue while additional half-hitches are being tied. It locks readily, it takes less time to tie than numerous square knots, and it is not as bulky as other knots. Therefore, we introduce this new sliding and one-way locking knot during the arthroscpic surgery of shoulder.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.230-235
• /
• 2006

The machine locking system is an important device for the safety of persons using the machine. In this study, a locking system using electromagnetic fields is proposed to decrease the defects and the cost for repairing and maintenance of the existing locking system using structural mechanism. We analyze the electromagnetic locking system and calculate the generated force considering direction by the finite element method. Also, we set up two design domains for the topology optimization; first domain is optimized to reduce the volume and the other is optimized to maximize the generated force keeping the volume, especially. The optimal design is obtained by integration of the two optimized results. An improved design is obtained by the optimal topology and it is confirmed by comparison with the initial locking system.

• 전자공학회논문지D
• /
• 제34D권6호
• /
• pp.58-64
• /
• 1997

The wavelengt lockin gsystem of the optical fabry-perot filter theoretially derived and experimentally realized by using the ithering method in order to compensate the laser wavelength drift increasing the BER of the WDM system. The deviation between the laser wavelength and the optical filter center wavelength is compensated by applying a suitable voltage to the PZT. Accordingly, the laser wavelength selected by the fabry-perot filter always maintains the condition of maximum transmission powr. A wavelength locking system has been demonstrated using a fiber fabry-perot filter with a free spectral range of 80nm and an FWH of 1nm. The voltages of the sine wave generated for dithering was 20mV and 10mV, the frequency was 2kHz and center wavelength of the tunable laser was 1550nm. In this paper, the locking system have 20ms of locking time and 2nm of locking range.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.509-510
• /
• 2006

FLL (Frequency Locked Loop) is the core block for high-speed transceiver. It incorporates a PLL for fine locking action, and a coarse controller for coarse locking action. A coarse controller compares frequencies coarsely and is applied to detected frequency difference directly. Compare to conventional FLL, frequency is applied to proposed FLL. Proposed FLL in this paper achieves only 5 cycles for coarse lock and total frequency locking time is 5 times faster than conventional FLL. Thus, proposed FLL is more useful to Ethernet transceiver application that requires high-speed data transfer than conventional FLL. Proposed FLL is based on $0.18{\mu}m$ process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.728-732
• /
• 2004

In the FE analysis of sheet metal forming, efficient results can be obtained by using shell elements rather than using solid elements. However, shell elements have some limitations to describe three-dimensional material laws. In the recent years, solid-shell element, which has only translational degree of freedom like solid element, has been presented. The assumed nature strain (ANS) and enhanced assumed strain (EAS) methods can be used to remove several solid-shell locking problems. In this paper, ANS method was used for diminish transverse shear locking and EAS method for thickness locking. Using the element, the steel pipe making process from flat plate analyzed effectively, which is including bending and welding.