• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1865-1870
• /
• 2014

토크 컨버터는 록업 클러치에 의해 엔진으로부터 변속기로 원활하게 동력을 전송하는 데 사용되는 복잡한 터보기계부품이며 유체 클러치 장치와 록업 클러치 장치로 구성된다. 고정 플레이트와 구동 판은 록업 클러치의 일부이며 록업 클러치는 효율과 연료 소비의 개선과 직접적인 관계가 있다. 본 논문에서는, 미케니컬 스토퍼가 장착되어 있는 리테이닝 플레이트의 응력 분포 특성을 분석하였으며. 미케니컬 스토퍼의 형태는 로크 업 클러치의 응력 분포에 영향을 미치는 것을 파악하였다.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.10-15
• /
• 2023

덕티드팬의 동력절환장치인 클러치의 마찰판 사양을 최적설계하고 그 결과를 분석하였다. 클러치는 기계적 잠금장치의 적용 여부에 따라 2가지 방식으로 구분하고 각자의 설계 조건 하에 최적화 되었다. 클러치를 최적 설계하기 위한 인자로 전달토크 용량, 마찰재 면압, 마찰면의 온도 및 드래그 토크 등을 계산하였고, 클러치 분리판의 부피와 드래그 토크의 최소화를 최적설계의 목적함수로 활용하였다. 기계적 잠금장치가 포함되지 않은 Type 1의 경우 덕티드팬의 피치각에 상관없이 클러치의 작동이 가능하지만, 기계적 잠금장치가 포함된 Type 2에 비해 마찰면의 외경이 약 2배정도 증가하였고, 부피는 약 5~7배, 드래그 토크는 약 7~12배 정도 증가하였다.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.599-603
• /
• 2007

An efficient optimum design process has been developed and applied to systematically design a lock-up clutch system for a torque converter used in an automatic transmission. A simulated annealing algorithm was applied to determine the parameters of the compressive helical damper springs in the clutch. The determination of the number, location, a number of turns, and deflection of damper springs plays an important role in reducing vibration and noise in the lock-up system. Next, FE-based shape optimization was coded to find the shape of the clutch disk that would satisfy the strength, noise and vibration requirements. Using the optimum code, parametric studies were performed to see how spring diameters and frequencies of clutch systems changed as the damper spring traveling angles and the torques were varied. Based on the optimum results, five different designs for clutches with different springs were fabricated and vibration analyses and tests were conducted to validate the accuracy of the proposed method. Results from the two methods show a good correlation.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.521-527
• /
• 2003

Modern automatic transmissions equip torque converters with lock-up clutches to reduce the energy loss of hydraulic systems. Instead of simply engaging the clutch disks, the new technology of clutch slip has been developed to improve the overall efficiency of power transmission. There are two major problems with the clutch slip system. The first is how to keep the slip between the two disks within a small range and the second is when to start or stop the slip. In this paper, the second problem is discussed in view of the vehicle economy. With a simple vehicle dynamic model, the fuel economy is calculated to determine the lock-up strategy. Then the lock-up strategy is developed for a slip schedule.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.74-80
• /
• 2009

The objective of this paper was to investigate the slip rate and the slip frequency number of damper clutch of torque converter in 2.4L passenger vehicle with 5-speed A/T and analyze the effect of slip control and control strategy on driving characteristics and the fuel economy. The newly developed torque converter with the more durable wet friction material and the slip-controlled damper clutch system, the DCC system, was installed, which was easily compatible and amendable of the lock-up clutch of the base system. The vehicle has been tested on the fuel economy modes such as FTP-75, HWFET and NEDC (ECE15+EUDC) driving cycle at chassis dynamometer. The DCC mode (II), of which the control strategy had both the lock-up and the slip-controlled clutch, and the DCC mode (I) with full slip-controlled clutch were compared with the base system with only the lock-up clutch. As the research result, comparison to base system, the fuel consumption of the vehicle with the DCC control (II) was effectively improved by 6.6% and 7.7% on FTP-75 and NEDC mode.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1129-1136
• /
• 2010

체결클러치에 부착된 댐퍼스프링은 유체커플링에서 직결로 변환될 때 발생하는 엔진 토크의 진동을 흡수하는 역할을 한다. 본 연구에서는 체결클러치의 성능을 좌우하는 압축스프링 및 지지 판 구조물의 최적설계를 통해서 새로운 설계형상을 제안하였다. 체결클러치와 연결된 엔진, 변속기, 구동축 및 휠, 차체질량 등 주요 부품들을 다 포함하는 다물체 동역학모델을 구성하여 공진 회피에 필요한 스프링상수를 계산하였다. 또한 어닐링 모사법에 의한 스프링 최적설계코드를 개발한 후 스프링상수, 최대충격토크, 수축각도, 스프링개수, 피로강도 등을 입력하여 압축 스프링의 사양을 최적화하였다. 이들 스프링을 지지하는 3 가지의 판에 대해서 컴플라이언스를 최소화하고 체적비를 0.3 이하로 하는 위상최적화를 수행하여 새로운 형상을 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.305-310
• /
• 2007

This paper presents a damper system design in torque converter to minimize the vibration in powertrain of automatic transmission vehicle. The lock-up clutch in torque converter makes engine and transmission connected directly. When the lock-up clutch is engaged the torque fluctuation of engine is attenuated by the damper system. This function decides the vehicle power-train dynamic characteristics. At first, the dynamic hysteresis effect with any self and surface to surface contact problems of the damper springs in the damper system for torque converter is analyzed by using FEM. It is shown that these simulation results have a good design reference to energy dissipation operating by damper system in torque converter. And, to calculate dynamic characteristics, the vehicle model is structured by using $AMESim^{(R)}$?? that is a common use program. The vehicle model shows the frequency response of vehicle by changing the stiffness of damper spring, and these results lead the most suitable stiffness of spring. Also, new damper system is analyzed resonance frequency variation and is compared with prior damper.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.1-7
• /
• 2024

The locking performance of a multi-plate clutch with a mechanical lock-up system is governed by the engagement algorithm. In this paper, a control algorithm to improve the locking performance of the clutch was studied. A 1D dynamic model was constructed and simulated according to the developed algorithm. The developed algorithm was composed of a method in which the locking device is engaged while generating artificial slip on the friction plate by controlling the piston pressure of the clutch. Furthermore, a case study of the parameters within the developed algorithm was conducted to explore combinations that maximize locking performance and analyze trends according to these parameters.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1334-1339
• /
• 2003

An efficient method is developed for the shape optimization of 2-D structures. The sequential linear programming is used for minimization problems. Selected set of master nodes are employed as design variables and assigned to move towards the normal direction. After adapting the nodes on the design boundary, the B-spline curves and mesh smoothing schemes are used to maintain the finite element in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.129-135
• /
• 2002

The present article deals with the measurement and the numerical calculations far the temperature distribution near the facing of the lockup clutch. The rotating telemetry system is Introduced for the estimation inside high-speed torque converter For the numerical calculation, the effect of the convective heat transfer is considered as well as the conduction to the solid. The estimation shows that the oil temperature near facing rapidly rises as the lockup clutch is engaged. The numerical results shows good agreements with the experimental values for the maximum temperature near the facing of the lockup clutch.