• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1141-1148
• /
• 2017

Generally, a thermistor made by sintering a metal oxide is widely used to measure the ambient temperature. This thermistor is widely used not only for industrial use but also for medical use because of its excellent sensitivity, durability, temperature change characteristics and low cost. In particular, the normal body temperature is 36.9 degrees relative to the armpit temperature, and it is most closely related to the circulating blood flow. Previous studies have shown that body temperature changes during biomechanical changes and body temperature changes by anomalous signs or illnesses. Therefore, in this study, we propose a Lock-In-Amp design to detect minute temperature changes of clothing and thermistor wired by a preacher as a method to regularly measure body temperature in daily life. Especially, it is designed to measure the minute resistance change of the thermistor according to body temperature change even in a low-cost microprocessor environment by using a micro-processor-based Lock-In-Amp, and a jacquard and the thermistor is arranged so as to be close to the side, so that the reference body temperature can be easily measured. The temperature was measured and stored in real time using short-range wireless communication for non - restraint temperature monitoring. A baby vest was made to verify its performance through temperature experiments for infants. The measurement of infant body temperature through the existing skin sensor or thermometer has limitations in monitoring infant body temperature for a long time without restriction. However, it can be overcome by using the embroidery fabric based micro temperature monitoring wireless monitoring device proposed in this study.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.131-136
• /
• 2008

System을 통해 출력되는 신호를 측정할 때 정확한 측정을 방해하는 요소로 잡음이 있다. 이런 신호 측정의 방해 요소인 잡음을 제거 하는 방법 중의 하나로 Lock-in Amp(LIA)가 사용되고 있다. 본 논문에서는 잡음 신호의 제거를 위해 사용 하는 LIA를 제작 하고 특성을 파악 하였으며 RF통신을 이용하여 무선 형태로 제작 하였다. 현재 상용화된 LIA는 프로브를 통한 유선으로 측정신호의 입력을 받게 되지만 본 논문에서 제작된 LIA는 무선신호 형태로 입력 하게 된다. RF통신의 케리어 주파수는 447.9[MHz]로 Digital GMSK 변복조방식을 이용하였다. LIA의 제작은 Dual Phase Sensitive Detecter을 사용하였으며, 주요 구성 요소인 Phase Locked Loop, Phase Shifter, Phase Sensitive Detector, Low Pass Filter등의 구조와 특성을 조사하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.33-35
• /
• 1984

A new type single beam photoacoustic spectrometer suitable for measuring optical absorption of condensed powder matter with the automatic calibration capability of a source power spectrum is introduced. The signal processing until of this spectrometer consists of a photoacoustic cell a lock-in amp., a switching circuit and a personal computer. The measured optical absorption spectra of a few material by this method are good agreement with the results obtained by the double-beam photoacoustic spectrometer.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.963-964
• /
• 2006

By combining a digital DLL and an analog DLL in 2-stage, an improved DLL is implemented in this paper. The proposed DLL is composed of a RDLL (Register Controlled DLL) and a conventional analog DLL. The phase comparator used in the DLL is built with sense-amp based D flip-flops for high speed operation. The proposed DLL circuits have been designed, simulated in 0.18um, 1.8V TSMC CMOS library. The implemented DLL have demonstrated the fast lock-on time of 1us and low jitter of 72ps.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.577-580
• /
• 2003

The magnetostriction of FeCoGe/phenol composites, which is one of the magnetostrictive materials, measured at the external magnetic field. The measurement was carried out using the electrical-resistance strain gage, the wheaten's Bridge for eliminating the unnecessary voltage, and the lock-in-amp for signal amplification and noise filtering. When the external magnetic field was applied in the longitudinal the samples, the maximum strain of 120ppm was taken with regard to the 10wt.% phenol composite. This results indicate that the FeCoGe/phenol composites can be useful as an actuator because it has larger stain than the other solid state actuators such as piezo electric materials.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.809-810
• /
• 2006

Reduction of AC losses is very important for realizing HTS cable and it had been reported that the same layer current controlled by twisting pitch and direction could reduce the AC losses effectively. During the long-term development of HTS cables, the superconductor AC losses will need to be reduced to a level determined by the economics of each installation and the efficiency of the refrigeration. Theoretical models have been developed to predict the magnitude of the losses in cables composed of several layers of flat HTS tapes. This paper is manufactured mini-model HTS cable and voltage signal line to spiral shape. Mini-model HTS cable is composed of 13 HTS tape. We measured to critical current and AC loss and compared used lock-in-amp to cancel coil. This data is useful to HTS cable of DAPAS program.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.149-153
• /
• 1995

세슘원자에 대한 레이저 쿨링용 광원으로 사용하기 위해 다이오드 레이저의 서폭을 축소하고 발진 주파수 및 출력을 동시에 안정화 시키는 연구를 수행하였다. 자유발진 상태에서 약 30 MHz 이고, 출력이 10mW인 다이오드 레이저에 유이창으로 Q 갑이 낮은 외부 공진기를 구성함으로써 발진선폭을 약 5MHz로 줄일수 있었다. 그리고 세슘원자의 포화흡수 스펙트럽의 교차공진 흡수선에 레이저 주파수를 안정시키기 위해 주입전류를 10kHz 로 변조하고, lock-in amp 의 출력단에서 나오는 주파수 오차신호를 전류공급장치와 유리창이 부착된 PZT로 동시에 피드백시켰다. 또한 오차신호를 레이저 다이오드의 온도 조절장치로 피드백 시킴으로써 주파수와 동시에 레이저 출력을 안정화시킬 수 있었다. 이 때의 출력의 변동폭은 약 0.03% 로서 온도로 피드백 시키지 않는 경우에 비해 약 260배 안정된 결과를 얻었다. 그리고 컴퓨터를 이용해서 흡수선의 peak 값을 매 10초마다 검색하고 이 값이 최대가 되도록 PZT 전압을 조절함으로써 레이저 주파수를 세슘원자의 흡수선의 봉우리에 1주일 이상 안정화시킬 수 있었다. 주파수 안정도 측정을 위해 Zeeman 이동된 포화흡수 스펙트로미터를 구성하였으며, 측정된 주파수 안정도 (Allan 분산의 제곱근)는 적분시간 1초 일 때 1.2x10-10 이었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.138-145
• /
• 2009

A suspended membrane micro fluidic heat flux sensor that is able to measure the heat flow rate was designed and fabricated by a complementary-metal-oxide-semiconductor-compatible process. The combination of a thirty-junction gold and nickel thermoelectric sensor with an ultralow noise preamplifier, low pass filter, and lock-in amp has enabled the resolution of 50 nW power and provides the sensitivity of $11.4\;mV/{\mu}W$. The heater modulation method was used to eliminate low frequency noises from sensor output. It is measured with various heat flux fluid of DI-water to test as micro fluidic application. In order to estimate the heat generation of samples from the output measurement of a micro fluidic heat-flux sensor, a methodology for modeling and simulating electro-thermal behavior in the micro fluidic heat-flux sensor with integrated electronic circuit is presented and validated. The electro-thermal model was constructed by using system dynamics, particularly the bond graph. The electro-thermal system model in which the thermal and the electrical domain are coupled expresses the heat generation of samples converts thermal input to electrical output. The proposed electro-thermal system model shows good agreement with measured output voltage response in transient state and steady-state.