• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.91-96
• /
• 2010

The combination of a bolt and nut is the element most widely used for connecting machines and structures. When a load is repetitively applied in the direction right angle to the bolt axis after the bolt and nut is fastened, the nut gradually becomes loose. To solve this problem, in this study, a new type of the loose-proof nut, called a lock nut, is developed. The lock nut is equipped with a spring, and the spring increases the axial force of the bolt. Then, the connection force between the bolt and nut is also augmented. Three dimensional finite element models for the bolt and spring are generated, and the change of the axial force of the bolt while the bolt is being inserted into the spring is analyzed using MSC/Marc, a commercial finite element program. Finally, the optimum shape of the spring is found according to the response surface analysis methodology. The optimization result is verified by comparing the variation of the axial force of the bolt when the bolt is inserted to the initial and optimized spring.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.77-81
• /
• 2009

Air-gap was introduced to suppress the saturation of the iron core comprising the flux-lock type superconducting fault current limiter (SFCL) with parallel connection of two coils. However, the air-gap makes the impedance of this SFCL decreased and can result in unusefulness of the SFCL. To analyze the current limiting characteristics of the SFCL with the air-gap, the experimental circuit for short-circuit test was constructed. Through the comparison with the current limiting characteristics of the SFCL without air-gap, the merit and the demerit of the flux-lock type SFCL with the air-gap were discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.233-234
• /
• 2007

We investigated the quench characteristics in integrated three-phase flux-lock type superconducting fault current limiter (SFCL), which consisted of three-phase flux-lock reactor wound on one iron core with the same turn's ratio between coil 1 and coil 2 for each single phase. To study the quench characteristics of the SFCL, the experiments was performed on various fault type such as the single line-to-ground fault, the double line-to-ground fault, the triple line-to-ground fault. From the experimental results, the generated point of element resistances was different on various fault type.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.2
• /
• pp.177-194
• /
• 1991

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from a distal extension removable partial dentures with three kinds of mandibular major connectors, that is, lingual bar, linguoplate, and swing-lock attachment. A photoelastic model was made of the epoxy resin(PC-1) and hardener(PCH-1) and coated with plastic cement-1 (PC-1) at the lingual surface of the epoxy model and set with three kinds of chrome-cobalt removable partial dentures. A bilateral vertical load of 15kg to the middle portion of the metal bar crossing both the first molars of the right and the left, and a unilateral vertical load of 12.5kg to the right first molar were applied with the use of specially designed loading device and the reflective circular polariscope was used to analyze the photoelastic model under each condition. The following results were obtained : 1. When the bilateral vertical load was applied, the magnitude and distribution of the stress concentration of the edentulous area and the terminal abutment or adjacent teeth was in the order of lingual bar, linguoplate, swing-lock attachment. 2. When the unilateral vertical load was applied, the magnitude and distribution of the stress concentration of the edentulous area and the terminal abutment or adjacent teeth was in the order of lingual bar, linguoplate, swing-lock attachment. 3. When the unilateral vertical load was applied, the magnitude and distribution of the stress concentration of the termial abutment or adjacent teeth on the non-loaded side showed the least stress distribution in case of swing-lock attachment. 4. When the bilateral vertical load and the unilateral vertical load were applied the swing-lock attachment showed the mildest uniform stress distribution on the edentulous area and the alveolar bone around the abutment teeth.

• Journal of English Language & Literature
• /
• v.55 no.5
• /
• pp.865-883
• /
• 2009

The mock-heroic, "the single most characteristic and individual literary form of the neoclassical era," as Brean Hammond puts it, epitomizes the process of the "novelization" of the 18th-century British culture. Bakhtin mentions that when the novel reigns supreme, almost all the remaining genres are "novelized"; Hammond borrows the term "novelization" from Bakhtin and uses it as a "shorthand way of referring to the cultural forces that render epic anachronistic." Indebted to Hammond's apprehension of novelization, this paper reads Alexander Pope's Rape of the Lock in the context of novelization, particularly focusing on 'probability,' 'contemporaneity' and 'domesticity,' three important signatures of the novelization of the 18th-century British culture. First, Sylph as a counterpart of god in epic is presented in The Rape of the Lock just as a helpless, fictional and irrelevant thing that hardly affects the empirical world. It indicates how the mock-epic 'mocks' the classical world of 'epic' and stands closer to the world of the novel. Second, Pope's poem displays an accurate picture of the author's contemporary reality, a capital concern of the novel, such as imperialism, consumer society, commodity fetishism, or reification. Lastly, The Rape of the Lock lays out the construction of modern gender ideology, another quintessential interest of the novel, particularly with the fixed female image of a coquette. It efficiently silences and nullifies Belinda, a typical coquette, who stands as a threatening force to the ascendent domestic ideology.

• Knowledge Management Research
• /
• v.12 no.5
• /
• pp.11-23
• /
• 2011

The objective of this study was to analyze the two contrary effects of usage habits on the acceptance of a new IT. The one is a positive one which may be caused by expertise from the repetitive usages of a current system while the other is a negative one which would be due to lock-in. For this purpose, this study suggested three hypotheses which account for not only the negative effect of the habit in current system on the intention of using a new system but also the positive moderation effects on both relationships of perceived usefulness and perceived ease of use with the intention of a new system. For the empirical tests of the hypotheses, this study surveyed acceptance of Google Docs for the users who have a habitual used word processor. The analysis by partial least square approach showed that the hypotheses were statistically supported.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.229-230
• /
• 2007

We investigated the quench characteristics of a superconducting element, two superconducting elements in order to increase the current capacity of flux lock type SFCL. The flux-lock type SFCL consisted of the transformer with a primary winding and a secondary winding connected in parallel, and the superconducting element was connected with secondary winding in series. The applied voltage at that time was 160 ${\sqrt{3}}$. We found that the parallel connection between the superconducting elements increased the power capacity and let quench characteristics improve through their mutual linkage.

• 전기의세계
• /
• v.22 no.1
• /
• pp.42-51
• /
• 1973

The contriving equivalent circuit of single phase induction motor which does not separate the primary leakage reactance and the secondary leakage reactance by the revolving field theory, and the graphically calculating method of the characteristics with T-type circle diagram of three phase induction motor which does not suppose the primary leakage reactance can be drawn up only by the no load test, the lock test, and measuring the resistance of stator winding are suggested in this paper. The method which can calculate the parameters of the equivalent circuit and the characteristics with no load test, lock test and measuring resistance of stator windings is suggested in this paper. Considered the exciting current in lock test, we could calculate very accurate characteristics of the single phase induction motor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.373-379
• /
• 2009

Presented in this paper is a new experimental technique to measure material properties of lock plate of gas turbine plants by using ultrasonic guided wave. In comparison with the mechanical destructive testings, material characterization of the Inconel x-750 was nondestructively carried out in a more efficient manner to discriminate the change in elastic moduli and the poisson's ratio attributed to the variation of heat treatment condition. The proposed technique shows a satisfactory feasibility via the comparative experiments with the imported lock plate specimens. It is also expected that the guided wave technique can cover a longer and wider range as a new cost-&-time-saving inspection tool due to the interaction with a greater part of specimen, compared to a conventional local point-by-point scheme.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2625-2628
• /
• 2003

Phase locked loops are widely used in many applications such as frequency synthesis, clock/data recovery and clock generation. In nearly all the PLL applications, low jitter and fast locking time is required. Without using adaptive loop filter, this paper proposes very simple method for improving locking time and jitter reduction simultaneously in charge pump PLL(CPPLL) using Daul Phase/Frequency Detector(Dual PFD). Based on the proposed scheme, the lock time is improved by 23.1％, and the jitter is reduced by 45.2％ compared with typical CPPLL.