• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.539-544
• /
• 2020

The research is on progressing to operate digital door lock with the method to guarantee the security and safety in the meantime to use digital door lock conveniently using Internet of Things (IoT) standardizing various service providing technology using IoT in home network currently. In this study, compose home network interconnecting Raspberry-PI and web server reflection this trend and composed the system to control the door lock after connect Arduino substituting converter function. Making Raspberry-PI using dynamic IP address using existing open source easily maintain DNS information and possible to connect internet network in home network ethernet and finally, making the smartphone can control door lock remotely entering designated address after connect the internet. The connection between home network and Arduino is executed by Raspberry-PI and bluetooth pairing as 1:1 and make random user's access to be impossible. Especially, to make open/close the door lock with smartphone not by using password on the keypad or using RFID card is judged as the method increasing the security make random user's access to be impossible and also increased the usefulness making remote control to be possible.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3B
• /
• pp.297-306
• /
• 2008

In order to determine the effects of lock gate expansion at the Lake Youngsan and Yeongam as well as increase in the width of the connecting channel of the two lakes on flood control downstream of the Youngsan River, an unsteady hydraulic flood routing was conducted by combining the Lake Youngsan and Yeongam as a single connected system. The coupled operation of the two lakes was found to have little effect when the widths of the lock gates and the connecting channel are set at the current level. It was also found that increasing the width of the connecting channel as well as the lock gate of the Lake Yeongam is an effective means of reducing the stage of the Lake Youngsan, whereas an increase in the width of the Lake Youngsan's lock gate had a relatively smaller effect. The extended width of the connecting channel leads to a rise in the stage of the Lake Yeongam. In order to reduce the elevated stage, The Lake Yeongam's lock gate must be expanded along with the Lake Yeongsan's lock gate. The analysis found that the stage of the Lake Yeongsan can be effectively controlled through adjustment of opening and shutting criteria of the connecting channel's lock gate, when diversion discharge between the lakes is increased as a result of expanding the width of the connecting channel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.188-189
• /
• 2006

The flux-lock type superconducting fault current limiter (SFCL) has the attractive characteristics that can adjust the current limiting level by the turns ratio and the winding direction of two coils. To apply this type SFCL into power system, the analysis for the recovery characteristics of it together with the current limiting characteristic is needed. In this paper, the experiments of the current limiting and the recovery characteristics of the flux-lock type SFCL with YBCO thin film were performed. The recovery characteristics of the flux-lock type SFCL dependent on the winding direction of two coils were analyzed through the comparison with the resistive type SFCL.

• BMB Reports
• /
• v.36 no.2
• /
• pp.167-172
• /
• 2003

The kinetics of thermal inactivation of copper-containing amine oxidase from lentil seedlings were studied in a 100 mM potassium phosphate buffer, pH 7, using putrescine as the substrate. The temperature range was between $47-60^{\circ}C$. The thermal inactivation curves were not linear at 52 and $57^{\circ}C$; three linear phases were shown. The first phase gave some information about the number of dimeric forms of the enzyme that were induced by the higher temperatures using the "conformational lock" pertaining theory to oligomeric enzyme. The "conformational lock" caused two additional dimeric forms of the enzyme when the temperature increased to $57^{\circ}C$. The second and third phases were interpreted according to a dissociative thermal inactivation model. These phases showed that lentil amine oxidase was reversibly-dissociated before the irreversible thermal inactivation. Although lentil amine oxidase is not a thermostable enzyme, its dimeric structure can form "conformational lock," conferring a structural tolerance to the enzyme against heat stress.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.288-297
• /
• 1994

The sewing machine is one of the oldest machine that has ever used, which is related with clothes' life. Modern sewing machines are divided into three groups by the sititch character, which are the lock stitch sewing machine group, the over lock sewing machine group and the specical sewing machine group. The lock stitch sewing machine have being used more than any others, which is also good model to study. This work is part of the improvement of an industrial lock stitch(ILS) sewing machine's design. The research objectives are the kinematic analysis and evaluations of stitch performance. The feed dog and the needle extreme's motion, which are important two part's motion in the sewing machine, are characterized by the stitch process and the needle trace. The needle trace is formulated as the stitch spacing, the stitch spacing's ratio(the static characteristic), and the stitch's phase difference(the dynamic characteristic). The tested ILS sewing machine is evaluated as a good static characteristic and a bad dynamic characteristic. Namely, a stitch spacing's ratio is 0.01~0.063(mm/mm) and a stitch's phase difference ratio is 0.06~0.13(mm/mm).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.20-23
• /
• 2003

The operational characteristics of flux-lock type high-Tc superconducting fault currentlimiters(HTSC-FCLs) was described and currents equation at each coil was derived from equivalent circuit. $YBa_{2}Cu_{3}O_{7-x}$(YBCO) thin film was used as the current limiting elements of the flux-lock type HTSC-FCL, which were fabricated by etching the YBCO thin film into 2 mm wide and 420 mm long meander line consisting of foureen stripes with different length. The 2nd peak on the current of coil 2 after a fault disappeared by current of the 3rd winding, which was installed in the flux-lock type HTSC-FCL.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.97-103
• /
• 2014

Recently, digital door locks have been widely used as physical security devices for the door. Although they are convenient compared to the existing lock system, they have the problem of being opened by an electric shock. In this study, to improve safety, a method to hide the door-lock device inside and to display the door-lock on a user's smart-phone screen through the augmented reality is suggested. Furthermore, an additional function has been added which provides memo notes to facilitate communication among family members. The results of this study have been implemented by using motors to control locks, Wi-Fi shield, Arduino, and a virtually created door and showed desirable experimental results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.65-71
• /
• 2017

Since existing Internet of Things(IoT) is vulnerable, it may cause property damage due to the information leakage. Especially, the smart door lock system built on the IoT can cause more damage. To solve these problems, this paper classify the data generated by the sensor according to the condition and send an alarm message to the user's smartphone through Google Cloud Message (GCM). We made it possible to check the images in real time through the smartphone application and control the door lock using the TCP / IP protocol. Also, we applied OTP-Based Matrix SEED algorithm to door lock system to improve security.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.289-293
• /
• 2016

The flux-lock type superconducting fault current limiter (SFCL) connects the two parallel windings in parallel with a ferromagnetic core. We suggest that the double quench flux-lock type SFCL should add a third winding. We analyzed characteristics of the fault current and the peak current using the quench of the high-Tc superconducting element. The proposed SFCL's inductances of a primary winding and the third winding were fixed and the amplitude of inductance of the secondary winding was changed. We found that the fault current can be more effectively controlled through the analysis of the equivalent circuit and the short-circuit tests.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.17-24
• /
• 2006

Anti-lock brake system(ABS) are designed to prevent wheel lock on all wheels of the vehicle by sensing wheel angular speed, processing the speed sensor signals in suitable digital electronic control circuits and comanding electrohydraulic actuators to control brake pressure. This study considers a control of ABS using wheel circumferential acceleration thresholds which avoids dangerous wheel locking due to excessive brake pressure during the vehicle braking and discusses the 3-channels, 3-sensors ABS system that employs "independent control" technique for the front wheels and "select low" technique for the rear wheels. The validities of the ABS such as vehicle stability, steerability and stopping distance during braking are assured through the vehicle tests on uniform asphalt straight roads.