• Asia-Pacific Journal of Business
• /
• v.10 no.4
• /
• pp.49-63
• /
• 2019

The export regulation of semiconductor core materials, which began with the recent revision of the export management regulations of Japan, raises the need for a new cooperation network. A hierarchical management network that was effective in the fast-follower system requires organic cooperation between the public sector and industry through a multilateral network that emphasizes horizontal co-operation among innovation actors. This study focused on the relational capital that exists among members of a business association such as an association that has been relatively marginalized from previous studies. In addition, this study aimed to analyze the effect of network activity characteristics such as industry-university linkage and informal exchange on technological innovation. Through this, I would like to draw implications for enhancing the effectiveness of the government's R & D support and innovation performance of R & D companies. Based on the results of the SMEs R & D survey, this study found that relational capital, informal exchange had a positive effect on technological innovation performance. However, if the relational capital exceeds a certain level, it is analyzed that there is a negative effect due to group think and lock-in effect. This means that informal exchange channels should be expanded for innovation and enhancement, and relational capital should be managed in consideration of the negative effects that may occur when certain levels are exceeded.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.287-295
• /
• 2021

This paper describes a recurrent neural network (RNN) for the fault classification of a blade pitch system of a spar-type floating wind turbine. An artificial neural network (ANN) can effectively recognize multiple faults of a system and build a training model with training data for decision-making. The ANN comprises an encoder and a decoder. The encoder uses a gated recurrent unit, which is a recurrent neural network, for dimensionality reduction of the input data. The decoder uses a multilayer perceptron (MLP) for diagnosis decision-making. To create data, we use a wind turbine simulator that enables fully coupled nonlinear time-domain numerical simulations of offshore wind turbines considering six fault types including biases and fixed outputs in pitch sensors and excessive friction, slit lock, incorrect voltage, and short circuits in actuators. The input data are time-series data collected by two sensors and two control inputs under the condition that of one fault of the six types occurs. A gated recurrent unit (GRU) that is one of the RNNs classifies the suggested faults of the blade pitch system. The performance of fault classification based on the gate recurrent unit is evaluated by a test procedure, and the results indicate that the proposed scheme works effectively. The proposed ANN shows a 1.4% improvement in its performance compared to an MLP-based approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.656-661
• /
• 2022

Password with a combination of 4-digit numbers has been widely adopted for various authentication systems (such as credit card authentication, digital door lock systems and so on). However, this system could not be safe because the 4-digit password can easily be stolen by predicting it from the fingermarks on the keypad or display screen. Furthermore, due to the prolonged COVID-19 pandemic, contactless method has been preferred over contact method in authentication. This paper suggests a new password input method based on eyeblink pattern analysis in video sequence. In the proposed method, when someone stands in front of a camera, the sequence of eyeblink motions is captured (according to counting signal from 0 to 9 or 9 to 0), analyzed and encoded, producing the desired 4-digit decimal numbers. One does not need to touch something like keypad or perform an exaggerated action, which can become a very important clue for intruders to predict the password.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.599-616
• /
• 2021

The semi-submersible with three circular columns is an original concept of efficient multifunctional platform, which can be used for marginal oil, gas field, and Floater of Wind Turbines (FOWT). However, under certain flow conditions, especially in uniform current with specific velocities, the eddies will alternatively form and drop behind columns, resulting in the fluctuating lift force and drag force. Consequently, the semi-submersible will subject to the Flow-Induced Motions (FIM). Based on the Detached Eddy Simulation (DES) method, the numerical studies were carried out to understand the FIM characteristics of the three-column semi-submersible at two different parameters, i.e., current incidences (0°, 30°, and 60°-incidences) and reduced velocities (4 ≤ U_r ≤ 14). The results indicate that the lock-in range of 6 ≤ U_r ≤ 10 for the transverse motions is presented, and the largest transverse non-dimensional nominal amplitude is observed at 60°-incidence, with a value of A_y/D = 0:481. The largest yaw amplitude A_yaw is around 3.0° at 0°-incidence in the range of 8 ≤ U_r ≤ 12. The motion magnitude is basically the same as that of a four-column semi-submersible. However, smaller responses are presented compared to those of the three-column systems revealing the mitigation effect of the pontoon on FIM.

• Journal of radiological science and technology
• /
• v.47 no.4
• /
• pp.287-294
• /
• 2024

Radiation oncology departments are at high risk for potential radiation safety incidents. This study aimed to identify risk factors for these incidents using the P-mSHEL (Patient, Management, Software, Hardware, Environment, and Liveware) model and to evaluate potential accident types through Failure Mode and Effects Analysis (FMEA). FMEA identified seven accident types with high Risk Priority Number (RPN). A total of 56 detailed risk factors were classified using the P-mSHEL model, and measures to prevent radiation safety incidents were implemented. The effect of these preventive measures on workers' safety perception was confirmed through two indicators (FMEA and safety perception). After implementing the preventive measures, the FMEA analysis showed that the highest reduction in RPN was for A-6 (radiation exposure while other patients/guardians are present) with a reduction rate of 33.3%, followed by B-3 (radiation exposure while staff are present) with a reduction rate of 33.3%. Overall safety perception significantly improved after the preventive measures (4.17±0.35) compared to before (2.76±0.33) (p<0.05), with notable increases in both employee safety culture (3.93±0.51) and patient safety culture (3.73±0.62) (p<0.05). This study identified risk factors in radiation oncology departments. Continuous management, maintenance, and fostering a strong safety culture are crucial for preventing incidents. Regular problem identification and collaboration with relevant departments are essential for maintaining safety standards.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.93-102
• /
• 2016

Purpose: The aim of this study was to evaluate the fit accuracy of two zirconia and titanium abutments in internal hexagonal implants. Materials and methods: One titanium abutment and two zirconia abutments were tested in internal hexagonal implants (TSV, Zimmer). Prefabricated zirconia abutments (ZirAce, Acucera) and customized zirconia abutments milled by the Zirkonzahn system (Zirkonzahn Max, Zirkonzahn) were selected and prefabricated titanium abutments (Hex-Lock, Zimmer) were used as a control. Eight abutments per group were connected to implants with 30 Ncm torque. The marginal gaps at abutment-implant interface, the internal gaps at internal hex, vertical and horizontal gaps between screws and screw seats in abutments were measured after sectioning the embedded specimens using a scanning electron microscope. Data analysis included one-way analysis of variance and the Scheffe test (n=16, ${\alpha}=0.05$). Results: The mean marginal gap of customized zirconia abutment was higher than those of two prefabricated zirconia and titanium abutments. The internal gaps at internal hex showed no significant differences between customized and prefabricated abutments and were higher than those of prefabricated titanium abutments. The mean vertical and horizontal gaps at screw in prefabricated zirconia abutment were higher than those of prefabricated titanium abutment. In the case of customized zirconia abutment, the mean horizontal gap at screw was higher than those of both the prefabricated zirconia and the titanium abutment but the mean vertical gap was not even measureable. The screw seats were clearly formed but did not match with abutment screws in prefabricated zirconia abutments. They were not, however, precisely formed in the case of customized zirconia abutments. Conclusion: Within the limitations of this study, the prefabricated titanium abutments showed better fit than the zirconia abutments, regardless of customized or prefabricated. Also, the customized zirconia abutments showed significantly higher marginal gaps and the fit was less accurate between screws and screw seats than the prefabricated abutments, titanium and zirconia.

• Journal of KIISE:Software and Applications
• /
• v.26 no.8
• /
• pp.955-963
• /
• 1999

다단계 보안 실시간 데이타베이스 시스템은 데이타베이스의 일관성 유지와 실시간 요구인 마감시간의 만족, 그리고 기밀성을 띤 데이타가 노출될 수 있는 비밀채널(covert-channel)의 방지라는 요구사항을 모두 만족해야 한다. 기존의 SRT-2PL(Secure Real-Time 2 Phase Locking)은 원본과 복사본으로 데이타 객체를 분리시켜 다른 등급간에 불간섭(non-interference)을 유지하여 비밀채널의 방지를 가능하게 하였으나, 복사본이 모든 데이타 객체에 대해 항상 존재하므로 메모리의 낭비가 있을 수 있고, 복사본의 갱신을 위한 갱신 큐의 관리에 따르는 오버헤드와 그에 따른 예측성 결여라는 문제점을 갖고 있다. 이를 개선하기 위하여 본 논문에서는 다단계 보안 실시간 데이타베이스 시스템의 요구사항을 모두 만족하는 동적 복사 프로토콜을 제안한다. 동적 복사 프로토콜은 로킹 기법을 기초로 동작하고, 트랜잭션의 작업에 따라 동적으로 복사본을 생성하고 삭제한다. 모의 실험 결과 제안한 동적 복사 프로토콜은 비밀채널을 방지하고 동적인 복사본의 생성으로 SRT-2PL의 단점인 메모리 낭비를 줄일 수 있으며, 예측성을 높여 마감시간 오류율을 감소시켰다.Abstract Concurrency control of real-time secure database system must satisfy not only logical data consistency but also timing constraints and security requirements associated with transactions. These conflicting natures between timing constraints and security requirements are often resolved by maintaining several versions(or secondary copies) on the same data items. In this paper, we propose a new lock-based concurrency control protocol, Dynamic Copy Security Protocol, ensuring both two conflicting requirements. Our protocol aims for reducing the storage overhead of maintaining secondary copies and minimizing the processing overhead of update history. Main idea of our protocol is to keep a secondary copy only when it is needed to resolve the conflicting read/write operations in real time secure database systems. For doing this, a secondary copy is dynamically created and removed during a transaction's read/write operations according to our protocol. We have also examined the performance characteristics of our protocol through simulation under different workloads while comparing the existing real time security protocol. The results show that our protocol consumed less storage and decreased the missing deadline transactions.

• Journal of Internet Computing and Services
• /
• v.1 no.2
• /
• pp.11-18
• /
• 2000

In this paper we present a new extensible model based upon the concept of subtransactions in real-time transaction systems. The nested transaction model originally proposed by J. Moss is extended for real-time uniprocessor transaction systems by adding explicit timing constraints. Based upon the model, an integrated concurrency control and scheduling algorithm is developed, that not only guarantees timing constraints of a set of real-time transactions but also maintains consistency of the database. The algorithm is based on the priority ceiling protocol of Sha et al. We prove that the Real-Time Nested Priority Ceiling Protocol prevents unbounded blocking and deadlock, and maintains the serializability of a set of real-time transactions. We use the upper bound on the duration that a transaction can be blocked to show that it is possible to analyze the schedulability of a transaction set using rate-monotonic priority assignment. This work is viewed as a step toward multiprocessor and distributed real-time nested transaction systems. Also, it is possible to be extended to include the real-time multimedia transactions in the emerging web-based database application areas.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.224-232
• /
• 2010

This paper aims to identify the characteristics and the current situation of the architectural characteristics, children's characters using facilities, and status of management and utilization by surveying 'Day Service for Children' in Tokyo-do. First, About the status of management and utilization, 'Day Service for Children' is operated by a local government, NPO corporate group and social welfare corporate. There are not big differences of the care program or running hours depending on operating principals but there are differences depending on staff organization, number of children and space constitution. Also, infants ratio at 'Day Service for Children' is high for the purpose of detecting disability early and supporting their development early. They have diverse disabilities but developmental disabilities' ratios high and most children are using both this facility and normal nursery centers together. Samples for proper child care based on status of space constitutions were installing lock, raising door knobs and using softer floor materials which are for children's safety. For the problem of space utilization, most comments were about lack of space which is not enough for teaching and training materials. Therefore, as an example, observation rooms for parents and teachers were sometimes used as storages and it changes teachers' moving direction, staying area and behavior zone. The programs of 'Day Service for Children' are divided to group teaching and private one. It will be the best if they have separate spaces such as group class room, private class room and play room. When they were operated by NPO corporate group or Social welfare corporate, there are many cases that their space was not properly zoned for each activity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.492-497
• /
• 2015

Currently, there are many kinds of tracked armored vehicles in service and they have encountered various environment and situations. So there are many obstacles to operate them improperly such as an engine stall. The causes of engine stall are an insufficient fueling, a mixture of air-fuel or vapor lock, and load increment which results from a rapid steering or increasing a viscosity of lubricant by low temperature. In this paper, engine stall by load increment due to a rapid steering or increasing of lubricant viscosity on tracked armored vehicles is analyzed, the ways to prevent it are applied, and their degrees of improvement are evaluated.